GOST 16588-91
ГОСТ 16588-91
|
|
Sawn products and wooden details. Methods for determining moisture content
Пилопродукция и деревянные детали. Методы определения влажности
Status: Valid - Supersedes
The standard applies to sawn timber and wooden parts of coniferous and hardwood and establishes three methods for determining the moisture content of sawn timber or parts: working - using an electro-electrometer, control and accelerated weight-drying methods. The standard does not establish a method for determining the pre-impregnation moisture of sawn wood and wooden parts and does not apply to aircraft lumber and blanks.
Стандарт распространяется на пилопродукцию и деревянные детали хвойных и лиственных пород и устанавливает три метода определения влажности пилопродукции или деталей: рабочий - с использованием электровлагометра, контрольный и ускоренный сушильно-весовые методы. Стандарт не устанавливает метод определения предпропиточной влажности пилопродукции и деревянных деталей и не распространяется на авиационные пиломатериалы и заготовки.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR Standardization and Metrology Committee,
12/28/1991
SKU: RUSS54643
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
79 Wood processing technology »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
005/2011 TR CU. O packaging safety »
Norms and standards (to TR TS 005/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.6 Testing and control of wood products »
4.6.1 Sawmill products »
ISO classifier »
79 WOOD PROCESSING TECHNOLOGY »
79.040 Wood, saw logs, sawn timber »
National standards »
79 WOOD PROCESSING TECHNOLOGY »
79.040 Wood, saw logs, sawn timber »
National Standards for KGS (State Standards Classification) »
Latest edition »
To Timber. Wood products. Cellulose. Paper, cardboard »
K2 Lumber and wood products »
K29 Test methods. Packaging. Marking »
National Standards for OKSTU »
PRODUCTS OF THE FORESTRY AND TIMBER-WOODWORKING INDUSTRY »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 16588-79: Sawn products and wooden details. Methods for determining moisture content
The Document References:
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24104-88: General purpose and reference laboratory balances
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
The Document is Referenced By:
GOST 1005-86: Wooden plank panels for the factory-made timber frame houses
GOST 10131-93: Wooden boxes and boxes from timber-based materials for the food industry, agriculture, and matches
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10597-87: Painting brishes. Specifications
GOST 10778-83: Spatulos. Specifications
GOST 11002-80: Wooden cases reinforced with wire. General specifications
GOST 11042-90: Construction steel hammers. Specifications
GOST 11047-90: Wood details and articles for one-two storey dwelling and public buildings
GOST 11214-2003: Windows of wood with glass. Specifications
GOST 1142-90: Horse-driven load carriages. Specifications
GOST 12082-82: Roof boarding for consignments up to 500 kg. General specifications
GOST 1400-91: Handles for builder's axes. Specifications
GOST 14225-83: Wooden cases
GOST 15613.4-78: Glued massive wood. Methods for determining the ultimate strength of serrate glued joints in static bending
GOST 15987-91: Wooden bodied planes
GOST 16371-2014: Furniture. General specifications.
GOST 16371-93: Furniture
GOST 16424-83: Blanks for sporting and hunting shooting gun stocks. Specifications
GOST 16854-2016: Armchairs for auditoriums. General technical conditions
GOST 16854-91: Auditorium arm-chairs. General specifications
GOST 17812-2022: Multi-turn wooden crates for vegetables and fruits. Specifications
GOST 17812-72: Multi-use wooden cases for vegetables and fruits. Specifications
GOST 18128-2018: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 18128-82: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 1824-88: Elements and assembly units of upper wooden construction of bridging parks. General specifications
GOST 18446-73: Glued wood. Evaluation method of heat and frost resistance of adhesive joints
GOST 18711-96: Tent wooden members and assembly units. General specifications
GOST 18853-73: Swing wooden gates for industrial buildings and structures. Specifications
GOST 18867-84: Coniferous sawn timber. Drying conditions in continuous chambers
GOST 19100-73: Glued wood. Method of testing of glued points weatherability
GOST 19414-90: Solid glued wood. General requirements for glued finger joints
GOST 19597-94: Garden rakes
GOST 19598-95: Lawn-and-garden hoes, grub-axes and cultivators
GOST 19773-84: Sawn timber of coniferous and broad-leaved species. Drying conditions in batch chambers
GOST 20740-75: Beehives. Specifications
GOST 20850-2014: Wooden glued load bearing structures. General specifications
GOST 20850-84: Wooden laminated structures. General specifications
GOST 21133-87: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds
GOST 21554.4-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in compression parallel to grain
GOST 21554.5-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in tension parallel to grain
GOST 21562-76: Metal-faced building panels with foam plastic thermal insulation. General specifications
GOST 2310-77: Steel bench hammers
GOST 23166-78: Wooden windows
GOST 23190-2018: Book-selling furniture. General specifications
GOST 23190-78: Bookselling furniture. General requirements
GOST 23508-2018: Book-selling furniture for storage facilities. General specifications
GOST 23707-95: Small tools for tillage
GOST 23790-79: Phosphates fire protective wood coating. Technical requirements
GOST 24617-81: Protection agents for wood. Test method of inflammable properties on models
GOST 24699-2002: Windows of wood with glass and glassing units. Specifications
GOST 24700-99: Windows of wood with glassing units. Specifications
GOST 247-58: Stave for barrels for vine, cognac, alcohol, juices and fruit water. Specifications
GOST 25097-2002: Windows from wood and aluminium. Specifications
GOST 25782-90: Derbies, floats, semifloats. Specifications
GOST 25884-83: Glue laminated wood structures. Method of determination of the interlayer strength of the glue joints
GOST 26138-84: Elements of built-in furniture and entresol for residential buildings. Specifications
GOST 26215-84: Hand-held wood-saws
GOST 26665-97: Metal bodies planes. Specification
GOST 26756-2016: Furniture for trade enterprises. General technical conditions
GOST 26756-85: Furniture for trade enterprises. General specifications
GOST 27812-2005: Glued laminated timber. Test methods for glue lines delaminating strength
GOST 2800-83: Blanks for wooden details of cart wheels. Specifications
GOST 28015-89: One-layer wooden floor panels. Technical requirements
GOST 28450-2014: Bridge wooden beams. Specifications
GOST 28469-90: Wooden laminated sleepers and cants for tram lines. Specifications
GOST 28637-90: Bristle brush articles. Check methods
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 30028.2-93: Wood-protecting preparations. Container method testing way protective ability to wood-colouring and moulding fungus
GOST 30734-2000: Roof wooden window blocks. Specifications
GOST 30972-2002: Glue wood billets and details for windows and doors. Specifications
GOST 3191-93: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications
GOST 33080-2014: Timber structures. Strength classes of structural sawn timber and methods of its determination
GOST 33082-2014: Timber structures. Methods of determining the bearing capacity of the joints
GOST 33120-2014: Glued timber structures. Methods for determining strength of glue joints
GOST 33121-2014: Glued timber structures. Methods for determining the resistance of glue joints to the temperature and humidity effects
GOST 33757-2016: Flat wooden pallets. Specification
GOST 34349-2017: Glued timber structures. Methods for determining of glue joints long-term strength
GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions
GOST 34635-2020: Fire-fighting equipment. Generators of fire-extinguishing aerosol. General technical requirements. Test methods
GOST 3808.1-2019: Softwood lumber and blanks. Atmospheric drying and storage
GOST 3808.1-80: Lumber from softwood
GOST 4.223-83: Quality ratings system. Building. Parquet articles. Nomenclature of characteristics
GOST 4.226-83: Quality rating system. Building. Windows, doors and gates of wood. Nomeclature of characterictics
GOST 4230-93: Garden knives
GOST 475-78: Wooden doors. General specifications
GOST 4971-76: Stabe billets for wooden barrels for beer. Specifications
GOST 4976-83: Furniture lacquers НЦ-218, НЦ-222, НЦ-243 and НЦ-223. Specifications
GOST 4981-87: Wooden joists. Specifications
GOST 5244-79: Wood chips
GOST 538-2001: Locks and building hardware. General specifications
GOST 538-2014: Locks and building hardware. General specifications
GOST 538-88: Lock and building hardware
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 6564-84: Lumbers and blanks
GOST 6782.1-75: Sawn soft wood
GOST 6782.2-75: Lumber from hardwood
GOST 7286-81: Wooden T-squares. Specifications
GOST 7319-2019: Lumber and hardwood blanks. Atmospheric drying and storage
GOST 7319-80: Sawn timber and blanks of broad-leaved species. Atmospheric drying and storage
GOST 78-2004: Wooden sleepers for full gauge railways. Specifications
GOST 7945-86: Scoops for finishing works. Specifications
GOST 8242-88: Profiled details from wood and wood materials for building. Specifications
GOST 862.1-2020: Parquet products. Massive parquet. Technical conditions
GOST 862.1-85: Floor parquet production. Block parquet. Technical requirements
GOST 862.2-85: Floor parquet products. Mosaic parquet. Specifications
GOST 862.3-2020: Parquet products. Multilayer parquet. Technical conditions
GOST 862.3-86: Floor parquet products. Parquet boards. Technical requirements
GOST 862.4-2020: Parquet products. Parquet shields. Technical conditions
GOST 862.4-87: Floor parquet products. Parquet panels. Technical requirements
GOST 8777-80: Tight and slack wooden barrels
GOST 8816-2003: Wooden cants for switch assemblies of wide gauge railways. Specifications
GOST 8816-2014: Switch wooden beams. Specifications
GOST 8821-75: Stave billets for wooden barrels for dry and liquid products. Specifications
GOST 8992-75: Wooden cants for switch assemblies of the narrow gauge railways. Specifications
GOST 8993-75: Wooden sleepers for narrow-gauge railways. Specifications
GOST 9338-2022: Plywood drums. Technical specifications
GOST 9338-80: Plywood drums. Specifications
GOST 9396-88: Boxes wooden reusable
GOST 9570-2016: Box and pestpallets. General specifications
GOST 9574-2018: Gypsum сoncrete panels for partitions. Specifications
GOST 9574-90: Gypsum concrete panels for partitions. Specifications
GOST R 50054-92: Bridge timbers laminated beams. Specifications
GOST R 51017-2009: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
GOST R 51057-2001: Fire fighting equipment. Portable fire extinguishers. General technical requirements. Test methods
GOST R 51057-97: Fire engineering. Portable fire extinguishers. General technical requirements. Test methods
GOST R 51870-2002: Domestic services. Services for cleaning up the buildings and constructions. General specifications
GOST R 52752-2007: Formworks. Test methods
GOST R 53280.4-2009: Automatic fire extinguishing systems. Extinguishing medium. Part 4. Dry fire extinguishing powders. General technical requirements and test methods
GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods
GOST R 53291-2009: Portable and movable devices of fire extinguishing with high-velosity submission of fire quenching matter. General technical requirements. Test methods
GOST R 56026-2014: Building materials. Method for determination of the fire danger group of roofing materials
GOST R 56071-2014: Products and billets of wood and wood materials for cultural and household use. Specifications
GOST R 56076-2014: Building structures. Construction from double skin metal faced insulating panels. Fire resistance and fire hazard test method
GOST R 56613-2015: Production of non-combustible and rotting modified wood. Specifications
GOST R 56706-2015: Glued cross laminated timber boards. Specifications
GOST R 56706-2022: Cross-laminated wood boards. General technical conditions
GOST R 56710-2015: Connections on the pasted cores for wooden structures. Specifications
GOST R 56711-2015: Pin type connection for wooden structures. Specifications
GOST R 57031-2016: Building timber structures. Rules of strength grading of sawn timber
GOST R 57786-2017: Wooden glued laminated bearing structures. Visual sorting of laminates to strength classes
GOST R 58516-2019: Paint brushes and brushes. Technical conditions
GOST R 58518-2019: Steel construction hammers. Technical conditions
GOST R 58519-2019: Rules, graters and graters. Technical conditions
GOST R 58558-2019: Wooden structures. Glued rods Test methods for determining standard values of mechanical characteristics
GOST R 58559-2019: Wooden structures. Metal gear keys. Test methods
GOST R 58562-2019: Wooden structures. Metal ring keys. Test methods
GOST R 58572-2019: Wooden structures. Transportation and storage conditions
GOST R 58615-2019: Wooden sleepers for broad gauge railways. Technical specifications
GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions
GOST R 58700-2019: Wooden windows and balcony doors for low-rise residential buildings. Types, Design and Dimensions
GOST R 59784-2022: Cross-laminated wood boards. Methods for determination of strength and elastic characteristics
GOST R 70202-2022: Joints of elements of wooden structures on glue rods. Methods for determining the standard values of resistance and pliability based on test results
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 3.04.01-87: Recommendations on the arrangement of floors (in development of SNiP 3.04.01-87 "Insulating and finishing coatings")
NPB 155-96: Fire engineering. Portable fire extinguishers. General reguirements and Test Methods
NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods
NPB 170-98*: Extinguishing powder for general purposes. General technical requirements. Test methods
NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods
NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
OST 13-15-79: Cutting boards for foods. Specifications
OST 13-158-83: Wooden returnable and reusable furniture container. Technical specifications.
OST 45.85-96: Wooden and metal shelf stands for electric power storages applied by telecommunication enterprises. General requirements.
OST 56-39-80: Wicker products from lath. Technical conditions
RST RSFSR 91-78: Percussion musical instruments. General technical requirements
SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities
ST RK 1489-2005: Fire fighting equipment. Fire extinguishing aerosol generators. General technical requirements. Test methods
STB 2106-2010: Pyrotechnic articles. Test methods
TR 95.09-99: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 09: Flooring
TU 102-237-85: Mobile buildings (inventory) of the block of the "Watch" system. Group specifications
TU 102-391-84: Bath-sauna panel on solid fuel
TU 102-529-89: Mobile buildings (inventory) of the block-containers of the panel construction of the Neftegazstroy system
TU 5361-002-39430024-07: Hardwood boards
TU 5369-004-54965805-05: Wooden glued blanks and details for interior decoration
TU 5369-005-54965805-05: Sets of parts and products wooden for collapsible saunas
|
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
