imgalt

GOST 5378-88

ГОСТ 5378-88

Vernier protractors. Specifications

Угломеры с нониусом. Технические условия

Status: Effective - Supersedes. IUS 1-1989 The limitation of effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard applies to goniometers with a reading on the Vernier 2`, 5` and 10` for measuring external angles from 0 ° to 360 ° and internal angles from 40 ° to 180 °.

Стандарт распространяется на угломеры с отсчетом по нониусу 2`, 5` и 10` для измерения наружных углов от 0° до 360° и внутренних от 40° до 180°.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 10/17/1988

SKU: RUSS54895

Price: $201.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P5 Instruments, tools and devices for linear, angular, profile and spatial measurements » P54 Angle Measuring Instruments »

National Standards for OKSTU » TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS » Angle and Cone Measuring Instruments »


As a Replacement Of:

GOST 5378-66: Vernier protractors. Specifications

The Document References:

GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means

GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements

MI 2131-90: Goniometers with nonius

PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation

The Document is Referenced By:

GOST 10362-2017: Pressure rubber hoses with thread reinforcement without end fittings. Technical conditions

GOST 10362-76: Pressure hoses of vulcanized rubber with thread reinforcement and without end fitting. Specifications

GOST 10403-80: Constructional steel trowels. Technical requirements

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 10703-73: Aluminium sheets for graphic arts industry. Specifications

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 10782-85: Glass bottles for blood, transfusion and infusion preparations/compounds

GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel

GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel

GOST 11474-76: Bent-steel sections. Specifications

GOST 11530-2014: Rail joint bolts. Specifications

GOST 11801-74: Foundry moulding and finishing tool. Specifications

GOST 12.4.091-80: Plastic miner's helmets

GOST 12.4.128-83: Safety helmets

GOST 13006-67: State system for ensuring the uniformity of measurements. Angle meters. Verification method

GOST 13240-78: Blanks of optical glass. Specifications

GOST 1335-84: Rubber brake hoses with thread reinforcement for railroad and subway transport without couplings

GOST 1435-90: Unalloyed tool steel bars, strips and coils

GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications

GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 16016-2014: Clamp bolts for rail track fastenings. Specifications

GOST 16017-2014: Inserted bolts for rail track fastenings. Specifications

GOST 16940-89: Sanitary stretchers. General technical requirements and test methods

GOST 18064-2016: Solid carbide boring tools with steel shank. Specifications

GOST 18491-90: Spectacle frames for corrective eye glasses

GOST 18578-89: Builders axes. Specifications

GOST 19410-74: Metal core boxes. Specifications

GOST 19437-2019: Cylindrical aluminum ingots. Technical specifications

GOST 19437-81: Cylindrical aluminium ingots. Specifications

GOST 20062-96: Tractor seat

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 21028-75: Jigs for machining holes of moulding boxes and pattern plates. Specifications

GOST 21305-75: Elements and assembly units for heated core boxes. Specifications

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 21797-2014: Two-turn spring washers for railway track. Specifications

GOST 22233-93: Extruded sections of aluminium alloys for enclosure building structures. General specifications

GOST 23.219-84: Products wear resistance assurance. Test method for wear resistance of materials and details with hydro erosion wearing by dispersed particles

GOST 23166-78: Wooden windows

GOST 23265-78: Spectacle lenses. Specifications

GOST 23747-88: Doors of aluminium alloys. Specifications

GOST 24258-88: Different types of scaffolding. General specifications

GOST 24308-2018: Utensils of copper-nickel alloy, german silver and brass with chrome or nickel coating. General specifications

GOST 24308-80: Utensils of copper-nickel alloy, nickel silver and brass with chrome or nickel coating

GOST 24320-2018: Utensils and covers of copper-nickel and copper-nickel-zinc alloys with silver or gold coating. General specifications

GOST 24320-80: Tableware made of cupronickel and nickel silver coated with silver or gold

GOST 24700-99: Windows of wood with glassing units. Specifications

GOST 24950-2019: Curved bends and curve inserts on bends of the linear part of steel pipelines. Technical specifications

GOST 25577-83: Steel bent closed welded square and rectangular sections. Specifications

GOST 25779-90: Toys. General safety requirements and control methods

GOST 25782-90: Derbies, floats, semifloats. Specifications

GOST 25791-90: Agricultural tractors and self-propelled machinery. Seat index point. Method of determination

GOST 26138-84: Elements of built-in furniture and entresol for residential buildings. Specifications

GOST 26433.2-94: System of ensuring geometric parameters accuracy in building. Rules for measuring parameters of buildings and works

GOST 26613-2016: Lathe tools with mechanically clamped changeable indexable inserts. Specifications

GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates

GOST 26665-91: Metal bodied planes. Technical specifications

GOST 26699-98: Underground drilling rigs. General specifications and test methods

GOST 26877-2008: Metal products. Methods of measuring form variations

GOST 26877-91: Metal products

GOST 26887-86: Platforms and ladders for civil engineering work. Specifications

GOST 26917-2000: Underground loading machines. General technical requirements and test methods

GOST 28300-2010: Cardan shafts of traction drive of diesel locomotives and diesel trains. General specifications

GOST 28393-89: PM bars and strips of high-speed steel. General specifications

GOST 28722-2018: Agricultural machinery. Mowers and mower conditioners. Test methods

GOST 28950-91: Drawing instruments. General technical requirements and test methods

GOST 30245-2003: Steel bent closed welded square and rectangular section for building constructions. Specifications

GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications

GOST 30245-94: Roll-formed steel welded closed square or rectangular sections designed for use in steel structures

GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications

GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications

GOST 30565-98: Hot-rolled steel shapes for machine-Building in chemical engineering and oil industry. General specifications

GOST 30673-2013: Polyvinylchloride profiles for windows and doors. Specifications

GOST 30673-99: Polyvinylchloride profiles for windows and doors. Specifications

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31471-2011: Panic and emergency exit devices. Specifications

GOST 31558-2012: Mine belt conveyers. General specifications

GOST 31589-2012: Ophthalmic optics. Spectacle frames for corrective eyeglasses. General technical requirements and test methods

GOST 32321-2013: Alarms guarding surface shock-contact glass break detectors for use in buildings. General requirements and test methods

GOST 32565-2013: Safety glass for ground vehicles. General specifications

GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications

GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions

GOST 32661-2014: Fibrе reinforced thermosetting plastic pipes and parts of pipelines. General specifications

GOST 32680-2014: Head current collection elements of pantographs of electric vehicle. General specification

GOST 32760-2014: General use highways. Traffic bollards. Test methods

GOST 32942-2014: Pre-stressed reinforced concrete bars for turnouts. General specifications

GOST 32942-2022: Prestressed reinforced concrete beams for switches. General specifications

GOST 32952-2014: Automobile roads of general use. Road marking. Test methods

GOST 33228-2015: Steel welded pipes for general purposes. Specifications

GOST 33320-2015: Ferro-concrete cross ties for railways. General specifications

GOST 33421-2015: Composite and ceramic-metal brake shoes for railway rolling stock. General specifications

GOST 33686-2015: Machines for transportation and application of liquid fertilizer. Methods of tests

GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions

GOST 34391-2018: Agricultural machinery. Technical grape harvesting machines. Test methods

GOST 34392-2018: Agricultural machinery. Planting machines. Test methods

GOST 34576-2019: Flat wooden pallets. Quality fasteners to assemble new and repair used wooden pallets

GOST 34705-2020: Fire-fighting equipment. Manual fire ladders. General technical requirements. Test methods

GOST 4070-2000: Refractory products. Method for determination of refractoriness-under-load

GOST 4070-2014: Refractory products. Method for determination of refractoriness-under-load

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4543-71: Structural alloyed steel

GOST 4686-2012: Brake beams of brake leverage gear. Specifications.

GOST 475-78: Wooden doors. General specifications

GOST 4781-85: Hot-rolled steel shapes for sheet piles. Specifications

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 5336-80: Single woven steel grids

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 535-88: Common quality carbon bar and shaped sections. General specifications

GOST 5422-73: Hot-rolled special steel sections for tractors. Technical specifications

GOST 5688-2015: Tools with carbide tips. Specifications

GOST 5813-2015: Fan v-belts and pulleys for engines of cars, tractors and combines. Requirements and test methods

GOST 6286-2017: High pressure rubber hoses with metal braids without end fittings. Technical conditions

GOST 6286-73: High-pressure rubber hoses with metal braids without fittings

GOST 7370-2015: Railway frogs. Specifications

GOST 7511-73: Steel sections for window and lantern transoms and window panels of industrial buildings. Specifications

GOST 8.005-2002: State system for ensuring the uniformity of measurements. Continuous conveyer balance. Methods and means of verification

GOST 8.046-2010: State system for ensuring the uniformity of measurements. Optical dividing heads. Verification procedure

GOST 8.215-2019: State system for ensuring uniformity of measurements. Flat glass plates for interference measurements. Verification Method

GOST 8.247-2004: State system for ensuring the uniformity of measurements. Sounding sticks for oil product level measuring in horizontal tanks. Calibration methods

GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications

GOST 8894-2018: Glass pipes. Specifications

GOST 8894-86: Glass pipes and shaped parts thereto Technical requirements

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9923-2021: Fire fighting equipment. Hand fire barrels. General technical requirements. Test methods

GOST R 12.1.031-2010: Occupational safety standards system. Lasers. Methods of dosimetric control of laser radiation

GOST R 51042-97: Face belt conveyors. Test methods

GOST R 51081-97: Requirements and test methods for static, impact and fatigue strengths

GOST R 51082-97: Wheelchairs. Method of measurement of seating and wheel dimensions

GOST R 51083-2015: Wheelchairs for disabled persons. General specifications

GOST R 51083-97: Wheelchairs for disabled persons. General specifications

GOST R 51191-2007: Units of lower-limb prostheses. Technical requirements and test methods

GOST R 51191-2019: Nodes of prostheses of the lower extremities. Technical requirements and test methods

GOST R 51194-98: Brushes of electrical machines. Methods of dimensions examination

GOST R 51555-99: Toys. General safety requirements and methods of tests. Mechanical and physical properties

GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications

GOST R 51844-2001: Fire equipment. Fire-fighting cabinets. General technical requirements. Test methods

GOST R 51844-2009: Fire equipment. Fire-fighting cabinets. General technical requirements. Test methods

GOST R 51932-2002: Ophthalmic optics. Spectacle frames for corrective eyeglasses. General technical requirements and test methods

GOST R 51984-2002: Mine belt conveyers. General specifications

GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST R 52114-2003: Units mechanics of upper-limb prostheses. Technical requirements and test methods

GOST R 52114-2009: Units mechanics of upper-limb prostheses. Technical requirements and test methods

GOST R 52750-2007: Panic and emergency exit devices. Specifications

GOST R 52878-2007: Tutors on upper and lower-limbs. Technical requirements and test methods

GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications

GOST R 53276-2009: Fire equipment. Hanging ladders for rescue from height. General technical requirements. Test methods

GOST R 53346-2009: Units of lower-limb orthoses. Technical requirements and test methods

GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications

GOST R 53906-2010: Toys. General safety requirements and methods of tests. Mechanical and physical properties

GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications

GOST R 54747-2011: Ferro-concrete cross ties for railways for 1520 mm gauge railways. General specifications

GOST R 54772-2011: Supple mining main vents and shaped components for them. General technical requirements and test methods

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 55068-2012: Glass-fibre and basalt-fibre reinforced epoxy plastic pipes and parts of pipelines. Specifications

GOST R 55075-2012: Sections of pipelines derived from composite materials intended for installation and rehabilitation of public water and wastewater systems. Specifications

GOST R 55153-2012: The mountain-mine equipment. Underground loading-transport machines. The safety requisitions and test methods

GOST R 55156-2012: Mining equipment. Mine belt stage loader. General technical requirements and test methods

GOST R 55159-2012: The mountain-mine equipment. Underground loading machines. General technical requirements and test methods

GOST R 55160-2012: Mining equipment. Mine face conveyers jacks. General technical requirements and test methods

GOST R 55430-2013: Detachable pipe joints. Evaluation of technical condition and methods of testing. Operation safety

GOST R 55728-2013: Mining equipment. Underground hydromonitors. Safety requirements and test methods

GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure

GOST R 56277-2014: Polymer composite pipes and fittings for intrafield pipelines. Specifications

GOST R 56288-2014: The easily dumped window constructions with double-glazed windows for buildings. General specifications

GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications

GOST R 56613-2015: Production of non-combustible and rotting modified wood. Specifications

GOST R 57207-2016: Polymer composites. Test method for shear properties of V-notched test samples

GOST R 57766-2017: Chairs with medical equipment. Types, technical requirements and methods of control

GOST R 57841-2017: Mining equipment. Belt conveyor rollers. General specifications

GOST R 57892-2017: Spinal assistants and headholders. Тechnical requirements and test methods

GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications

GOST R 58385-2019: Cold-rolled steel profiles for construction. Technical specifications

GOST R 58519-2019: Rules, graters and graters. Technical conditions

GOST R 58540-2019: Fire fighting equipment. Semi-rigid pressure fire hoses. General technical requirements. Test methods

GOST R 58683-2019: Doors are ship internal fire-retardant type "B". General technical requirements

GOST R 58685-2019: Permeable ship doors. Test Methods and Types

GOST R 59620-2022: Public roads. Spherical (spherical segmental) combined bearing parts for bridge structures. General specifications

GOST R 70215-2022: Shipboard furniture and non-mechanical room equipment. Norms and test methods

GOST R 70368.1-2022: Elevators. Inspections, tests and measurements. Part 1. Procedure of measurements and rules of registration of the results of certification of elevators before commissioning.

GOST R 70368.2-2022: Elevators. Inspections, tests and measurements. Part 2. Procedure of measurements and rules of registration of the results of certification of elevators during operation

GOST R 70368.3-2022: Elevators. Inspections, tests and measurements. Part 3. The procedure of measurements and rules of registration of the results of inspection of elevators, which have worked out their appointed service life

GOST R 70686-2023: Swimming pools. Starting boards. Technical conditions

GOST R 70731.3-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel

GOST R 70731.4-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of 08Х18Н10Т austenitic class steel.

GOST R ISO 230-1-2010: Machine tools tests. Part 1. Measurement techniques of geometrics parameters

Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification

MI 1782-87: GSI. Calibration procedure

MI 1848-88: Methods of verification. GSI: Folding metallic and wooden meters. Calibration procedure

MI 2006-89: State system for ensuring uniformity of measurements. Depth gauge indicators. Verification procedure

MI 2024-89: State system for ensuring uniformity of measurements. Metal measuring rulers. Method of verification

MI 2131-90: Goniometers with nonius

MU 2002-2002: Methodology for examining the technical condition of cabinet elevators for drill and casing KM type and cast elevators for casing EN type to determine the possibility of their further operation

MU 36.22.14-00: Guidelines for conducting static tests of crane-pipelayers

MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life

OST 26.260.758-2003: Metal structures. General technical requirements.

PNST 353-2019: General automobile roads. Expansion joints with rubber compensator spans for road bridges. General specifications

PNST 391-2020: High-strength steel packaging tape. Technical specifications

PNST 454-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel

PNST 455-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of austenitic steel grade 08Х18Н10Т

RD 15-13-2008: Guidelines for the examination of industrial safety of compressor installations used in coal mines and mines

RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators

RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations

RD 34.10.103: Industry-Specific Specified Quantity Allowance for Tools, Equipment, Materials, and Aids for Repair and Rehabilitation of Gas Cleaning Equipment of Thermal Electric Powers

RD 34.11.324-90: Method for Measurements of Mass of Solid Fuel Supplied to Thermal Power Stations Using Automatic Conveyor Scales

RD 34.47.603-79: Guidelines for the overhaul of high-voltage three-pole circuit breakers VMPE-10

RD 50-159-79: Guidelines for Calibrating Pulse Holographic Installations of the UIG-1M Type

RD 50-222-80: Guidelines. Verification of measuring holographic installations of type UIG-2 (UIG-2M and UIG-2G-1)

RD 50-411-83: Methodological instructions. liquids and gases flow rate. Measurement technique using special orifices.

RD-15-15-2008: Guidelines on the procedure for conducting industrial safety expertise of mine electric locomotives

RST RSFSR 516-88: Eaves metal. Technical conditions

RST RSFSR 698-83: Ovens made of sheet steel. Technical conditions

SP 470.1325800.2019: Steel structures. Work Rules

SP 53-101-98: Manufacturing and quality control of steel structures for construction

ST RK 1798-2008: Electrical cables and wires. Fire hazard indices. Testing methods

ST RK 1976-2010: Fire engineering. Tower ladders. General specification

ST RK 1980-2010: Fire engineering. Basic fire fighting trucks. General specification

ST RK 1981-2010: Fire engineering. Fire aerial ladders. General specification

ST SSFZhT TsT 046-99: Shaft cardan main drive diesel locomotives and diesel trains. Typical test method

ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions

STB 813-93: Scissors. General specifications

TPr 126-85: Model program for state acceptance testing of range finders

TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions

TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC

TU 13-427-78: An inclinometer. Technical conditions

TU 13-429-78: Goniometer. Technical conditions

TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa

TU 14-158-116-99: Steel electric-welded longitudinal pipes of increased corrosion resistance and cold resistance for gas and oil pipelines

TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines

TU 14-3R-1471-2002: Northern-straight-seam electric-welded pipes for arranging oil and gas fields, main gas pipelines, oil and oil product pipelines of field pipelines. Technical specifications

TU 14-3R-53-2001: Seamless mechanically machined steel pipes for steam pipelines

TU 14-3R-56-2001: Welded steel pipes with a diameter of 1420, 1620, 1720, 2020 and 2220 mm for general use. Technical conditions

TU 14-8-440-83: Refractory Thermal Insulating Slabs Made from Mullite-Silicon Wool on Clay and Organic Binders

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

TU 36.26.11.01-06-92: Windows and bindings of light emitting lamps. Technical conditions

TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions

TU 36-1496-85: Cable prefabricated structures. Technical conditions

TU 36-2287-80: Bent closed welded square and rectangular profiles

TU 36-2745-85: Scrap steel Technical conditions

TU 5216-002-03910056-2008: Barrier metal fencing. Technical conditions

TU 5262-010-56506912-2004: Roadside restraints for cars, side, first type, metal. Technical conditions

TU 5361-002-39430024-07: Hardwood boards

TU 68-2.211-91: Plastic globe (diameter 210 mm). Technical conditions

TU 9557-010-02570823-97: Cartographic products. Plastic globe (diameter 320 mm)

VSN 003-88: Design and Installation Guidelines to Plastic Piping

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!