GOST 18360-93
ГОСТ 18360-93
|
|
Plate snap-gauges for diameters from 3 to 260 mm. Dimensions
Калибры-скобы листовые для диаметров от 3 до 260 мм. Размеры
Status: Effective - Supersedes. IUS 5-1994
The standard applies to smooth sheet one-sided and two-sided two-limiting caliber brackets to control shafts with diameters from 3 to 260 mm. Calibres brackets for diameters ranging from 3 to 180 mm are designed to control rolls with tolerance fields acco
Стандарт распространяется на гладкие листовые односторонние и двусторонние двупредельные калибры-скобы для контроля валов диаметрами от 3 до 260 мм. Калибры скобы для диаметров от3 до 180 мм предназначены для контроля валовс полями допусков по ЕСПД 6-го и
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 16
Approved: Gosstandart of Russia,
6/2/1994
SKU: RUSS54953
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G2 Industrial tools and accessories »
G28 Measuring tools »
As a Replacement Of:
GOST 18360-73: Staples double-sided for sizes from 3 to 10 mm. Design and dimensions
GOST 18361-73: Sheet staples for sizes from 3 to 10 mm. Design and dimensions
GOST 18362-73: Staples sheet for diameters from 10 to 100 m. Design and dimensions
GOST 18363-73: Staple sheets for diameters from 100 to 180 mm. Design and dimensions
GOST 18364-73: Staple sheets for diameters from 180 to 260 mm. Design and dimensions
The Document References:
GOST 18369-73: Cover handles for snap gauges. Design and dimensions
GOST 2015-84: Fixed plain gauges. Technical requirements
GOST 21401-75: Plain limit gauges for dimensions up to 500 mm. Required dimensions
GOST 6636-69: Standard linear dimensions
OST 1203: Working gauges for shafts of 2 and 2a accuracy classes. Tolerances
OST 1203*: Gauges working for shafts of 2 and 2a accuracy classes. Allowances
OST 1205: Working gauges for holes of 2a accuracy class and for shafts and holes of 3rd and 3a accuracy classes. Tolerances
OST 1205*: Gauges working for holes of 2a accuracy class and for shafts and holes of 3 and 3a accuracy classes. Allowances
OST 1208: Receiving gauges for shafts of 2nd and 2a accuracy classes and holes of 2nd accuracy class. Tolerances
OST 1208*: Gauges receiving for shafts of 2 and 2a accuracy classes for holes of 2nd class of accuracy. Allowances
OST 1209: Receiving gauges for holes of 2a accuracy class and for shafts and holes of 3rd and 3a accuracy classes. Tolerances
OST 1209*: Gauges receiving for holes of 2a-class accuracy and for shafts and holes of 3 and 3a accuracy classes. Allowances
OST 1219: Limit gauges for smooth shafts and holes of 5th class of accuracy. Allowances
OST 1220: Limit gauges for smooth shafts and holes of 4th class of accuracy. Allowances
OST NKM 1221: Ultimate smooth calibers for shafts and holes of the 8th and 9th classes of accuracy. Tolerances
The Document is Referenced By:
GOST 13663-86: shaped steel pipes technical requirements
GOST 19277-2016: Seamless steel pipes, cold-deformed for oil and fuel pipelines. Specification
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 22897-86: Seamless cold-deformed pipes from alloys based on titanium. Specifications
GOST 23270-89: Tube-billets for machining
GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications
GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications
GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.
GOST 32931-2015: Profile steel pipes for metal constructions. Specifications
GOST 33228-2015: Steel welded pipes for general purposes. Specifications
GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5654-76: Steel seamless hot-shaped pipes for shipbuilding
GOST 6238-77: Casing pipes and core barrels for prospecting drilling and nipples to them
GOST 631-75: Upset drill pipes with couplings
GOST 800-78: Bearing tubes. Technical requirements
GOST 8467-83: Steel drill pipes with
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
GOST R 51924-2002: Double tube core barrel for exploration drilling. General technical specifications
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 54086-2010: Pressure regulators. General specifications
GOST R 54157-2010: Profile steel pipes for metal constructions. Specifications
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54864-2016: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54929-2012: Steel welded pipes for general purposes. Specifications
GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C
GOST R 56030-2014: Pipes for details of bearings. Technical specifications
GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications
GOST R 57423-2017: Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6, 4 MPa and temperatures exceeding 400 °C. Specifications
GOST R 57430-2017: Pipes, fitting from ductile iron with spherical graphite and their connections for trade oil pipelines. Specifications
GOST R 58064-2018: Steel welded pipes for building structure. Technical specifications
TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines
TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions
Customers Who Viewed This Item Also Viewed:
 |
Special railway rolling stok. Dynamic and strength testing procedures
Language: English |
Blanks for marine shafts and rudder stocks. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.