GOST 11098-75

ГОСТ 11098-75

Gauge callipers with reading arrangement. Specifications

Скобы с отсчетным устройством. Технические условия

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)

The standard applies to brackets with a measurement range of up to 1000 mm, equipped with a reading device with a scale value of 0.001, 0.002 and 0.010 mm, intended for linear measurements.

Стандарт распространяется на скобы с пределами измерений до 1000 мм, оснащенные отсчетнымустройством с ценой деления 0,001, 0,002 и 0,010 мм, предназначенные для линейных измерений.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: State Committee of Standards of the Council of Ministers of the USSR, 11/27/1975

SKU: RUSS54985

Price: $144.00




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P5 Instruments, tools and devices for linear, angular, profile and spatial measurements » P53 Instruments for measuring lengths (outer and inner dimensions) »

National Standards for OKSTU » TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS » Lever devices »


As a Replacement Of:

GOST 11098-64: Gauge callipers with reading arrangement

The Document References:

GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage

GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability

GOST 3882-74: Sintered hard alloys. Types

GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means

GOST 8.359-79: State system for ensuring the uniformity of measurements. Gangs callipers with reading arrangement. Methods and means for verification

GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols

Letter 4725-OG/03: About a typo in GOST 11098-75

The Document is Referenced By:

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 10354-82: Polyethylene film Specifications

GOST 11018-2011: Traction railway stock wheelsets of 1520 mm gauge railways. General specifications

GOST 12177-79: Cables, wires and cords. Methods of construction checking

GOST 12393-2019: Rail contact network fittings linear. General specifications

GOST 14311-85: Steel cord

GOST 14338.4-82: Molybdenum. Methods for determination of nitrogen, oxygen and hydrogen

GOST 14339.4-82: Tungsten. Methods for the determination of nitrogen, oxygen, hydrogen

GOST 14340.1-74: Enameled round wires. Method for measurement of wires diameters

GOST 16483.35-88: Wood. Method for determination of swelling

GOST 16483.37-88: Wood. Method for determination shrinkage

GOST 20477-75: Polyethylene tape with adhesive layer

GOST 22082-76: Injection mould bases, detail-blanks and details of injection moulds. Specifications

GOST 23663-79: Printed circuit boards. Mechanical surface stripping. Requirements for standard technological processes

GOST 25951-83: Thermoshrinking polyethylene film. Specifications

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST 31847-2012: Wheel sets for the special-purpose rolling stock. General specifications

GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods

GOST 4835-2013: Wheelsets for freight and passenger car. Technical specifications

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 6292-93: Rice groats

GOST 7871-75: Aluminum and aluminium alloy welding wire

GOST R 52204-2004: Cold-rolled blackplate and tinplate. Specifications

GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications

GOST R 8.597-2003: State system of insuring the uniformity of measurements. Coaxial loads. Method of verification

Letter 4725-OG/03: About a typo in GOST 11098-75

MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification

MI 1799-87: Guidelines. Squares testing 90 degrees. Control method

MI 1813-87: Methodical instructions. State system for ensuring uniformity of measurements. Spring measuring heads. Verification Method

MI 1863-88: Guidelines. State system for ensuring uniformity of measurements. The heads are measuring spring-optical. Opticators Method of verification

MI 1904-88: Threaded cylindrical gauges. Methods of control

MI 954-85: Methodical instructions. Indicators are multi-turn. Models 05205, 05305. Verification procedure

MI 955-85: GSE. Digital raster system for linear measurements. Models 19000, 19001. Method of verification

MP 203-9-2020: Squares testing 90 degrees of the Calibron trademark. Verification method

MU 2002-2002: Methodology for examining the technical condition of cabinet elevators for drill and casing KM type and cast elevators for casing EN type to determine the possibility of their further operation

OST 13-86-80: Metrological support of furniture production. General requirements for calibration data base and instruments. Gauges monitoring.

OST 26.260.758-2003: Metal structures. General technical requirements.

PR 32.131-98: Rules for Metrology. Typical training program for calibrators measuring instruments of geometric quantities in railway transport

RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations

RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment

RD 50-98-86: Methodological instructions. Selecting universal means of dimensional measurement up to 500 mm (application as per GOST 8.051-81).

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

TU 16-525.609-85: Asynchronous motors AIS80 - AIS112, supplied for export. Technical conditions

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!