GOST R 52129-2003
ГОСТ Р 52129-2003
|
|
Mineral powders for asphaltic concrete and organomineral mixtures. Specifications
Порошок минеральный для асфальтобетонных и органоминеральных смесей. Технические условия
Status: Effective - Introduced for the first time. IUS 1-2004
This standard applies to mineral powders used as a component of asphalt concrete and other types of organic mixtures, and sets out the requirements for them and methods for their testing.
Настоящий стандарт распространяется на минеральные порошки, применяемые в качестве компонента асфальтобетонных и других видов органоминеральных смесей, и устанавливает требования к ним и методы их испытаний
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of Russia,
6/27/2003
SKU: RUSS55448
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.68 Road materials »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.1 Testing and control of products of mining and non-metallic industry »
4.1.1 Ore minerals and concentrates »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
National standards »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh18 Road materials »
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 11022-95: Solid mineral fuels. Methods for determination of ash
GOST 12026-76: Filter paper for laboratory application
GOST 12784-78: Mineral powder for asphaltic mixtures. Methods of tests.
GOST 12801-98: Materials on the basis of organic binders for road and airfield construction. Test methods
GOST 14710-78: Petroleum toluene
GOST 16557-78: Mineral powder for asphaltic-mixtures. Technical requirements
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 20015-88: Chloroform. Specifications
GOST 20799-88: Industrial oils Specifications
GOST 22245-90: Viscous petroleum road bitumens. Specification.
GOST 23683-89: Hard petroleum paraffines
GOST 23932-90: Laboratory glassware and equipment. General specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 30491-97: Organic mineral mixtures and soils stabilized by organic dinders for road and airfield construction Specifications
GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness
GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications
GOST 3900-85: Petroleum and petroleum products. Method for determination of density
GOST 3956-76: Silica gel technical. Technical conditions
GOST 450-77: Calcium chloride technical. Technical conditions
GOST 5541-2002: Cork means of closing. General specifications
GOST 6613-86: Square meshed woven wire gauzes
GOST 6709-72: Distilled water. Specifications
GOST 8269.1-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works Methods clicmical analysis
GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST 9572-93: Petroleum benzene
GOST R 51232-98: Drinking water. General requirements for organization and quality control methods
The Document is Referenced By:
GOST 30491-97: Organic mineral mixtures and soils stabilized by organic dinders for road and airfield construction Specifications
GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications
GOST 31424-2010: Non-metallic construction materials from sifting of crusting solid stone in aggregate manufacturing. Specifications
GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications
GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST R 52128-2003: Bitumen road emulsions. Specifications
GOST R 54401-2011: Automobile roads of general use. Hot road mastic asphalt. Technical requirements
GOST R 55052-2012: Reclaimed asphalt. Specifications
ODM 218.2.002-2007: Method for determining the elasticity of asphalt-binder in polymers-concrete mixtures (for experimental use)
ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction
ODM 218.2.034-2013: Guidelines for the preparation and use of asphalt mix using recycled asphalt
ODM 218.2.042-2014: Guidelines. Warm asphalt mixes. Recommendations for use
ODM 218.2.079-2016: Recommendations about design macrorough pavings
ODM 218.3.001-2006: Guidelines for the application of polymer-dispersed reinforcement of asphalt concrete using rubber thermoplastic elastomer (RTEP)
ODM 218.3.007-2011: Rationing of the properties of organic binders depending on climatic conditions and operating conditions of coatings
ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation
ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials
ODM 218.3.054-2015: Device of a surface treatment and thin layers of wear with application of different types of fibers
ODM 218.3.058-2015: Guidelines for the use of synthetic fiber for dispersed reinforcement of hot asphalt concrete
ODM 218.3.060-2015: Guidelines for the repair of pavements consisting of cement concrete pavements, covered with asphalt concrete pavements, on public roads
ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles
ODM 218.3.096-2017: Guidelines for the volumetric design of asphalt mixtures according to the Marshall Methodology
ODM 218.3.102-2017: Guidelines for the construction of asphalt pavement under adverse weather conditions
ODM 218.3.112-2019: Guidelines for the development and approval of technological regulations for production at the enterprises of the road sector
ODM 218.5.008-2008: Methodical recommendations on the use of a crack-interrupting layer when constructing road pavements with a polymer-asphalt-concrete coating (for experimental implementation)
ODM 218.9.079-2016: Recommendations about design macrorough pavings
PNST 105-2016: Sulfur concrete mixtures and sulfur concrete. General specifications
PNST 191-2017: Sulfur asphaltic concrete mixtures and sulfur asphaltic concrete. Specifications
PNST 192-2017: A mixture of crushed stone-mastic sulfur asphalt and stone-mastic sulfur asphalt. Specifications
PNST 266-2018: Cast sulfur asphalt mixture and cast sulfur asphalt. Specifications
Recommendations 706: Recommendations on application of asphalt concrete on the basis of different strength stone materials
SP 243.1326000.2015: Design and construction of low-volume roads
SP 78.13330.2012: Automobile roads
SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations
STO 218.5.001-2005: Production of mixtures and the device of a rough thin layer coating (STP)
TR 103-07: Technical recommendations for the construction of road structures using asphalt concrete
TR 197-08: Technical recommendations on the use of asphalt concrete mixtures modified with old asphalt concrete additives
TU 5718-001-53737504-03: Blend of sulfur asphalt concrete cast and cast asphalt concrete
TU 5718-002-04000633-2006: Cast asphalt mix and cast asphalt mixes
TU 5718-003-04000633-2006: Asphalt (hot) and asphalt mixes for monolithic road structures
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.