imgalt

GOST 19300-86

ГОСТ 19300-86

Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters

Средства измерений шероховатости поверхности профильным методом. Профилографы-профилометры контактные. Типы и основные параметры

Status: Effective. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 1880 dated 12/06/91

The standard applies to contact profile profilometers for measuring the profile and parameters of surface roughness along the centerline system.

Стандарт распространяется на профилографы-профилометры контактные для измерения профиля ипараметров шероховатости поверхности по системе средней линии.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 6/26/1986

SKU: RUSS55796

Price: $71.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P5 Instruments, tools and devices for linear, angular, profile and spatial measurements » P52 Instruments and tools for controlling roughness, shape and location of surfaces »

National Standards for OKSTU » TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS » Universal measuring devices »


As a Replacement Of:

GOST 19299-73: Apparatus for measuring the surface roughness by the profile method. Profile testing instruments. Types. The main parameters

GOST 19300-73: Apparatus for measuring the surface roughness by the profile method. Profilometers contact systems M. Types. The main parameters

The Document References:

GOST 2789-73: Surface roughness. Parameters and characteristics

The Document is Referenced By:

GOST 10703-73: Aluminium sheets for graphic arts industry. Specifications

GOST 10708-82: Pendulum impact machines

GOST 10791-2011: All-rolled wheels. Specifications

GOST 11042-90: Construction steel hammers. Specifications

GOST 11614-2019: Semi-automatic flush taps. Technical specifications

GOST 11614-94: Semi-automatic flushing valves. Specifications

GOST 11996-79: Batch-type mixers for rubber. General specifications

GOST 12393-2019: Rail contact network fittings linear. General specifications

GOST 13006-67: State system for ensuring the uniformity of measurements. Angle meters. Verification method

GOST 13135-90: Surface grinders with rectangular table. Basic dimensions. Standards of accuracy

GOST 13297-86: Diamond cutting tools and inserts

GOST 13726-78: Aluminium and aluminium alloys strips. Specifications

GOST 13726-97: Aluminium and aluminium alloys strips. Specifications

GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 14117-85: Strip made from precision alloys for elastic elements

GOST 14333-79: Rubber working mills. General specifications

GOST 15127-83: Solid worm hobs for cutting of teeth on the sprockets for the driving roller chains and bush chains

GOST 15146-69: Thermal-treated steel tape for musical instrument reeds. Specifications

GOST 15612-2013: Products from wood and wood materials. Methods for determination of roughness parameters

GOST 15612-85: Products of wood and wooden materials. Methods for determining surface roughness parameters

GOST 160-84: Spindles for twisting and spinning machines

GOST 16528-87: Rectangular magnetic plates

GOST 16854-2016: Armchairs for auditoriums. General technical conditions

GOST 17151-2019: Utensils made of sheet aluminum. General specifications

GOST 17151-81: Cooking utensils made

GOST 17232-99: Aluminium and aluminium alloys plates. Specifications

GOST 17519-87: Rectangular electromagnetic chucks

GOST 18098-87: Jig-boring and jig-grinding machines. Standards of accuracy

GOST 18098-94: Jig-boring and jig-grinding machines. Standards of accuracy

GOST 18326-87: Low-alloyed zinc sheets for one-stage and multistage etching. Specifications

GOST 18482-2018: Aluminium and aluminium alloy extruded tubes. Specifications

GOST 18482-79: Aluminium and aluminium alloy extruded pipes. Specifications

GOST 18578-89: Builders axes. Specifications

GOST 1908-88: Capacitor paper

GOST 19126-2007: Medical metallic instruments. General specifications

GOST 19126-79: Metallic medical instruments

GOST 19147-82: Skiing sticks. Specifications

GOST 19277-2016: Seamless steel pipes, cold-deformed for oil and fuel pipelines. Specification

GOST 19437-81: Cylindrical aluminium ingots. Specifications

GOST 21488-76: Extruded bars of aluminium and aluminium alloys

GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 21643-2022: Medical staplers. General technical conditions

GOST 21643-82: Mechanical surgical suturing devices

GOST 21996-76: Cold-rolled heat treated steel-cord belt

GOST 21997-76: Steel flattened strip of high strength

GOST 22178-76: Titanium and titanium alloys sheets. Specifications

GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications

GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications

GOST 22233-93: Extruded sections of aluminium alloys for enclosure building structures. General specifications

GOST 22357-87: Figure skates. General specifications

GOST 22358-87: Racing and hockey skates. General specifications

GOST 22685-89: Moulds for making control specimens of concrete. Specifications

GOST 2283-79: Cold-rolled tape made of tool steel and spring steel

GOST 2284-79: Cold-rolled carbon structural steel strip

GOST 23.211-80: Products wear resistance assuring. Testing of materials for wear under fretting and fretting-corrosion conditions

GOST 23.224-86: Products wear resistance assurance. Re-established machine parts. Experimental evaluation of wear resistance ability

GOST 23.301-78: Products wear resistance assurance. Instruments for evaluating wear by the method of cut notches. Technical requirements

GOST 23342-2012: Architectural-building goods of the natural stone. Specifications

GOST 23522-79: Cold-rolled strip for hack saws. Specifications

GOST 24099-2013: Decorative facing slabs on basis of natural stone. Specifications

GOST 24179-80: Glass filters, filter-lenses, lenses, light diffusers and deflecting glass inserts for railway transport light-signals

GOST 25001-81: Rolled-welded aluminium sheet billets for heat-exchangers. Specifications

GOST 25046-81: Disposable injection needles

GOST 25442-82: Molybdenum annealed strips for deep drawing. Specifications

GOST 25779-90: Toys. General safety requirements and control methods

GOST 25858-83: Surface density and thickness measures for radioisotope thickness gauges. Specifications

GOST 25982-83: Stomatologic tips for a microdrive

GOST 26246.0-89: Foil-clad electrical insulating materials for manufacture of printed plates. Test methods

GOST 26496-85: Hydraulic accumulators. Acceptance rules and test methods

GOST 26634-91: Dental rotary instruments. Shanks

GOST 26917-2000: Underground loading machines. General technical requirements and test methods

GOST 26991-86: Optical connectors. Requirements for technological process

GOST 27860-88: Machine parts. Measurement of wear

GOST 28281-89: Side milling cutter for cutting of sprocket teeth for driving roller and sleeve-type chains

GOST 28328-89: Round electromagnetic chucks

GOST 28613-90: Paint coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control

GOST 28617-90: Metallic and non-metallic inorganic coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control

GOST 28813-90: Plain bearings. Metallic multilayer materials for thin-walled plain bearings

GOST 30051-93: Spline grinding machines. Basic dimensions. Standards of accuracy

GOST 30273-98: Circular and rectangular electromagnetic chucks. General specifications

GOST 30456-2021: Metal products. Steel pipes, rolled steel plates and coils. Falling load impact test method

GOST 30629-2011: Materials and products facing of rocks. Test methods

GOST 30629-99: Cladding materials and products made of natural stone. Test methods

GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications

GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions

GOST 34525-2019: Stainless steel sinks. Technical conditions

GOST 34854-2022: Calibers for connections with tapered threads of casing, tubing, drilling and pipeline pipes. Methods of measuring geometric parameters

GOST 4047-82: Rim saws for metal cutting

GOST 4491-2016: Cast centers of wheels for railway rolling stock. General specifications

GOST 503-81: Cold-rolled low-carbon steel strip. Specifications

GOST 538-2001: Locks and building hardware. General specifications

GOST 538-2014: Locks and building hardware. General specifications

GOST 538-88: Lock and building hardware

GOST 5497-80: Cold-rolled steel strip for saws of cotton-scrubbing machines

GOST 6737-80: Drawing frames for cotton and chemical fibers

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 8.247-2004: State system for ensuring the uniformity of measurements. Sounding sticks for oil product level measuring in horizontal tanks. Calibration methods

GOST 8570-80: Disk shavers

GOST 8617-2018: Pressed sections of aluminium and aluminium alloys. Specifications

GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.704-80: Unified system of corrosion and ageing protection. Vulcanized rubbers. Methods of determination of the packing parts for the fixed joints working capacity during the radiation-thermal ageing

GOST 9.904-82: Unified system of corrosion and ageing protection. Aluminium alloys. Accelerated test method for exfoliating corrosion

GOST 9324-2015: Worm-type complete fine milling cutters for cylindrical gears with involute profile. Specification

GOST 9324-80: Finishing single-thread hobs for involute spur-wheels

GOST 9416-83: Building levels. Technical requirements

GOST 9480-2012: Plates facing from a natural stone. Technical conditions

GOST 9509-74: Scales and dosimeters. Knife-edges and bearings of steel. General requirements

GOST ISO 12301-95: Plain hearings. Quality control techniques and inspection of geometrical and material quality characteristics

GOST R 50851-96: Stainless steel sinks. Specifications

GOST R 51015-97: Blades for household and special use. General specifications

GOST R 51016-97: Sets of carbon steel and aluminium alloys. General specifications

GOST R 51268-99: Scissors. General specifications

GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST R 51555-99: Toys. General safety requirements and methods of tests. Mechanical and physical properties

GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications

GOST R 51829-2022: Gypsum fiberboard sheets and products based on them. Technical specifications

GOST R 51970-2002: Ski-poles for walk and sport race skiing. Specifications

GOST R 52204-2004: Cold-rolled blackplate and tinplate. Specifications

GOST R 52218-2004: Shaft sinking winches. General technical requirements and test methods

GOST R 53784-2010: Optical elements for light signal devices of a railway transport. Specifications

GOST R 53906-2010: Toys. General safety requirements and methods of tests. Mechanical and physical properties

GOST R 53935-2010: Screwdrivers for fitting and assembling for recessed screws and wood screws. General technical requirements, methods of control and tests

GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications

GOST R 54561-2011: Hygienic coatings of containers used for food products transportation and storage. General technical requirements

GOST R 55075-2012: Sections of pipelines derived from composite materials intended for installation and rehabilitation of public water and wastewater systems. Specifications

GOST R 55498-2013: Rolled wheel centres for railway rolling stock. Technical specifications

GOST R 56207-2014: Slabs and tiles of engineered stone on the basis of natural quartz. Specifications

GOST R 56281-2014: Aluminum alloy extruded large round tubes. Specifications

GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications

GOST R 57378-2016: Earthing rod for railway overhead contact system. Specifications

GOST R 58333-2018: Pressed finned panels made of aluminum alloys. Technical specifications

GOST R 58419-2019: Additive technology. Products made of titanium alloys made by selective electron beam fusion. General specifications

GOST R 58432-2019: Laser hardening of mechanical engineering parts. Technological process

GOST R 58514-2019: Building levels. Technical conditions

GOST R 58612-2019: Composite wheels of a railway rolling stock. Assembly process specifications

GOST R 70595-2022: Shipboard fittings. General specifications

GOST R 8.651-2009: State system for ensuring the uniformity of measurements. Contact (stylus) instruments for the measurement of surface roughness. Procedure of calibration

GOST R 8.652-2009: State system for ensuring the uniformity of measurements. Contact (stylus) instruments for the measurement of surface roughness. Metrological characteristics of correct filters

GOST R 8.677-2009: State system for ensuring the uniformity of measurements. Cylindrical thread gauges. Verification procedure

GOST R 9.318-2013: Unified system of corrosion and ageing protection. Nanostructure non-metallic inorganic coatings formed by microarc oxidation on aluminium and its alloys. General requirements and methods of control

MI 1382-86: Guidelines. Protractor pendulum. Type ZURI-M. Method of verification

MI 1384-86: GSE. Caliper with a handout model 124. Calibration method

MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification

MI 1795-87: Patterns of travel control KSH gauge 1520 mm. Control method

MI 1850-88: State system for ensuring uniformity of measurements. Samples of surface roughness (comparison). Method of verification

MI 1875-88: Guidelines. State system for ensuring uniformity of measurements. Plates are plane-parallel glass. Method of verification

MI 1903-97: Recommendation. State system for ensuring uniformity of measurements. Standards for coating thickness. Method of verification

MI 1937-88: Gauges for taper connections. Methods of control

MI 1958-89: State system for ensuring uniformity of measurements. Optimetry. Method of verification

MI 2007-89: State system for ensuring uniformity of measurements. Testing and marking plates. Method of verification

MI 2029-89: Calibration and marking prisms with one prismatic recess and grip. Methods of control

MI 2031-89: Calibration and marking iron prisms. Methods of control

MI 2056-90: Pneumatic plugs for holes from 3 to 160 mm. Methods of control.

MI 2066-90: Sets of accessories to plane-parallel end measures of length

MI 2078-90: Wires and rollers

MI 2106-90: Setting rings for measuring the diameters of the holes

MI 2130-91: Recommendation. State system for ensuring uniformity of measurements. Universal involutes of firms Zeiss Jena, Maag, Klingelnberg, Hofler, Osaka Seimitsu Kikai and Hamai. Verification Method

MI 2131-90: Goniometers with nonius

MI 390-87: Guidelines. GSE. Levels are electronic. Method of verification

MI 450-84: Exemplary measures of coating thickness. Cooking method

MI 82-87: Rings, standard, of 4th category for bore gages with a scale division of 0.001 and 0.002 mm

MI 928-85: GSE. Exemplary rings of the 3rd category. Methodology of metrological certification

MP 114-233-2018: GSI. Special flat angle measures

MU 0898-00.001: Methods of conducting non-destructive testing of hooks of lifting and transport equipment (automobile, tractor, trailer cranes and crane beams)

MU 29-86: Application at the enterprises of the industry GOST 2789-73 "Surface roughness. Parameters and characteristics" and GOST 2.309-73 "Designation of surface roughness"

RD 34.10.130-96: Instructions for visual and measuring control.

RST RSFSR 516-88: Eaves metal. Technical conditions

RST RSFSR 605-89: Folding knives. General technical conditions

ST SSFZhT TsL-TsT 146-2003: Cast wheel centers for rolling stock of 1520 mm gauge railways. Typical methods of control of the macrostructure

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

STB 813-93: Scissors. General specifications

TU 34-38-20092-94: High pressure surface heaters for steam turbine regeneration systems. Technical conditions for major repairs

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20195-94: Fuel oil heaters of PM and PMR types. Technical conditions for major repairs

TU 34-38-20196-94: Steam heaters, water-water heat exchangers. Technical conditions for major repairs

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs

TU 38 0051166-98: Rubber compounds for the rubber products of aircraft

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!