imgalt

GOST 443-76

ГОСТ 443-76

Benzene-solvent for rubber industry. Technical requirements

Нефрасы С2-80/120 и С3-80/120. Технические условия

Status: Not effective - Canceled. IUS 10-1992

The standard applies to nefrasy C2-80 / 120 and C3-80 / 120 (gasoline-solvents for the rubber industry), which is a low-boiling fraction of catalyzed reforming de-aromatized gasoline or gasoline of direct distillation of low-sulfur oils and used in the rubber industry

Стандарт распространяется на нефрасы С2-80/120 и С3-80/120 (бензины-растворители для резиновой промышленности), представляющие собой легкокипящую фракцию деароматизированного бензина каталитического риформинга или бензина прямой перегонки малосернистых нефтей и применяемые в резиновой промышленности

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of the Council of Ministers of the USSR, 6/1/1976

SKU: RUSS55886

Price: $454.55

imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.100 Lubricants, industrial oils and related products »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.100 Lubricants, industrial oils and related products »

National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B4 Petroleum products for industrial and domestic consumption » B41 Solvents »

National Standards for OKSTU » OIL, PETROLEUM PRODUCTS, GAS » Light oil products »


As a Replacement Of:

GOST 443-56: Gasoline solvent for the rubber industry. Specification

GOST 5.2200-74: Gasoline solvent for the rubber industry BR-2. Quality requirements for certified products

The Document References:

GOST 10163-76: Reagents. Soluble starch. Specifications

GOST 12026-76: Filter paper for laboratory application

GOST 12329-77: Petroleum products and hydrocarbon solvents. Method for determination of aniline point and aromatic hydrocarbons

GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage

GOST 17323-71: Engine fuel. Determination of mercaptan and hydrogen sulphide sulphur content by pontentiometric titration

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 19121-73: Petroleum Products Determination of sulphur content by lamp method

GOST 20292-74: Laboratory volumetric glassware. Burettes, pipettes

GOST 2177-82: Petroleum Products Fractionation Method

GOST 244-76: Photographic grade sodium thiosulphate, crystalline - specification

GOST 2517-85: Crude oil and petroleum products. Methods of sampling

GOST 3900-85: Petroleum and petroleum products. Method for determination of density

GOST 4160-74: Reagents. Potassium bromide. Specifications

GOST 4204-77: Reagents. Sulphuric acid. Specifications

GOST 4220-75: Reagents. Potassium bichromate. Specifications

GOST 4232-74: Reagents. Potassium iodide. Specifications

GOST 4457-74: Reagents. Potassium bromate. Specifications

GOST 6307-75: Petroleum products. Method of test for water-soluble acids and alkalies

GOST 6709-72: Distilled water. Specifications

GOST 7978-74: Gasoline solvents. Method for determination of tetraethyl lead presence

The Document is Referenced By:

GOST 1012-72: Aviation petrol

GOST 10306-75: Lubricating oils. Method of evaporation loss in dynamic conditions

GOST 10734-64: Lubricating oils containing additives. Method for determination of detergen potential

GOST 11126-88: By-product coke raw materials for the production of commercial carbon

GOST 11257-65: Mineral oils. Determination of the stability of energy oils using the static method

GOST 11362-76: Petroleum products. Determination of base, acid and acidity by potentiometric titration

GOST 11629-75: Plastics. Method of test for coefficient of friction

GOST 11858-66: Crude petroleum and petroleum products. Method for determination of asphalt-tar content

GOST 12.4.129-83: System of safety standards. Materials for special foot-wear uppers. Method for determination of petrolеum and petrolеum products penetration

GOST 12.4.130-83: System of safety standards. Materials for special foot-wear uppers. Method for determination of petroleum and petroleum products resistance

GOST 12.4.165-85: Occupational safety standards system. Protective leather footwear. Determination of the coefficient of attachment strength decrease due to aggressive media action

GOST 12.4.171-86: Occupational safety standards system. Personal means of hand protection from toxic substances. Methods for determination of permeability, cleansability and stability

GOST 12275-66: Lubricating oils and additives. Method for determination of degree of cleanliness

GOST 12856-84: Asbestos-steel sheets. Specifications

GOST 13835-73: Low-molecular thermal shock resistant synthetic rubber СКТН. Specifications

GOST 14340.4-69: Enameled round winding wires. Method of the heat shock test

GOST 14340.5-69: Enameled round winding wires. Test method for insulation on blocking

GOST 14340.6-69: Enameled round winding wires. Test method for maintenance without removal of insulation

GOST 14340.8-69: Enameled round winding wires. Method of the solvent-, oil- and water resistance test

GOST 14925-79: Cis-isoprene synthetic rubber. Specifications

GOST 15037-69: Grease for impregnating organic strand cores of wire rope

GOST 1520-84: Selectively refined oils. Method for determination of furfural presence in oils

GOST 15823-70: Oils and lubricants. Method for determination of the saturated vapour pressure

GOST 16295-82: Packing anticorrosive paper. Specifications

GOST 17311-71: Moulded rubber durable soles, heels and heel pieces. Specifications

GOST 17601-90: Marine centrifugal separators. Acceptance and methods of tests

GOST 18099-78: Enamels ML-152. Specifications

GOST 19006-73: Motor fuel. Method for determination of the filtering factor

GOST 19024-79: Enamels AC-182. Specifications

GOST 19031-73: Closing up for ropes and their components. Specifications

GOST 1929-87: Petroleum products. Methods of test for determination of dynamic viscosity by rotary viscosimeter

GOST 19678-74: Vacuum oils. Method for determination of vapour pressure and boiling point

GOST 19686-74: Vacuum oils. Method for assessing the quality of the ultimate residual pressure

GOST 19930-91: Sewing domestic machines. General specifications

GOST 20302-74: Motor oils. Method of corrosion test for oils on engine 'Yas-204'

GOST 20458-89: Grease Torsiol-55. Specifications

GOST 20502-75: Oils and additives to them. Methods for determination of corrodibility

GOST 20549-75: Vacuum diffusion welding of working elements of separating and shape forming dies. Typical technological process

GOST 20684-75: Used motor oils. Method for determination of insoluble sediments

GOST 20824-81: Varnish ЭП-730. Specifications

GOST 20841.4-75: Silicium organic products. Methods for determination of medium reaction

GOST 21218-75: Rubber spheres dividing for pipelines. Specifications

GOST 21490-76: Motor oils. Method of test detergent properties by the installation 'УИM-6-НАТИ'

GOST 21534-76: Petroleum The determination of chloride salts content

GOST 21751-76: Sealants. Determination method of tensile strength, ultimate elongation at break and deformation set after break

GOST 21802-84: Chlorophyll-carotene coniferous paste. Specifications

GOST 21956-88: Filter paper and board. Method for determination of leak-tightness

GOST 21981-76: Sealants. Determination method of bond strength with metal at peeling

GOST 22564-77: Enamels KO-84 and KO-859. Specifications

GOST 23.210-80: Ensuring of wear resistance of products. Method for evaluation of frictional heat resistance of materials

GOST 23.214-83: Ensuring of wear resistance of products. Pendulum method for measuring the friction coefficient of rolling

GOST 23.222-84: Ensuring of wear resistance of products. Method for assessing the interoperability of surfacing materials for restorative parts

GOST 23175-78: Lubricating oils. Method for determination of motor properties and thermal-oxidative stability

GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications

GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications

GOST 23630.1-79: Plastics. Method for the determination of thermal capacity.

GOST 23744-79: Non-drying mastic 51-Г-6. Specifications

GOST 24037-90: Asbestos-polymer seal sheet materials. Method of test for resistance to liquids

GOST 24691-81: Metal aerosol cans. Method of determination of anticorrosive lining completeness

GOST 24784-81: Enamels ПФ-188. Specifications

GOST 2488-79: Ceresin. Specifications

GOST 24943-81: Engine oils. Photometric method for assessing contamination of spent oils

GOST 25374-82: Extraction bees wax. Specifications

GOST 25945-87: Polymer building non-hardening sealing materials and products. Test methods

GOST 26581-85: Greases. Method of test for effective viscosity on a rotary viscosimeter

GOST 26614-85: Powder antifriction materials. Test method for determination of tribotechnical properties

GOST 27640-88: Engineering materials and lubricants. Experimental evaluation of coefficient of friction

GOST 27896-88: Rubbers, polymer elastic materials, rubberized and elastic polymer coated fabrics. Methods for determination of fuel permeability

GOST 3276-89: Lubricating grease ГОИ-54п. Specifications

GOST 33-82: Petroleum products. Method for determination of kinematic viscosity and calculation of dynamic viscosity

GOST 3877-49: Heavy petroleum products. Method for determination of sulfur content by burning in a calorimetric bomb

GOST 4039-48: Benzenes. Method for determining the duration of the induction period

GOST 4039-88: Automobile gasolines. Methods of test for induction period

GOST 5152-77: Gland Packing. Specification

GOST 5228-76: Rubber o-rings for the couplings of asbestos-cement pipes. Specification

GOST 5228-89: Rubber o-rings for the couplings of asbestos-cement pipes

GOST 5702-75: Process lubricant SP-3

GOST 6244-70: Electrical insulating impregnating varnishes БТ-987, БТ-988. Specifications

GOST 8.044-80: State system for ensuring the uniformity of measurements. Diamond indenters of the hardness testing machines for metal and alloys. Verification methods and means

GOST 8.113-85: State system for ensuring the uniformity of measurements. Vernier callipers. Verification methods

GOST 8.290-78: State system for ensuring the uniformity of measurements. BУ-type viscometers. Methods and means of calibration

GOST 8756.21-89: Products of fruit and vegetable processing. Methods for determination of fat

GOST 8781-71: Low-temperature clock oils. Specifications

GOST 9.061-75: Unified system of corrosion and ageing protection Rubbers. Accelerated test method for resistance to attack by liquid corrosive media during rotation under frictional condition

GOST 9.068-76: Unified system of corrosion and ageing protection. Sealants. Test methods for resistance to attack by liquid corrosive media

GOST 9.080-77: Unified system of corrosion and ageing protection. Plastic greases. Accelerated method for determination of corrosion effect on metals

GOST 9.712-86: Unified system of corrosion and ageing protection. Adhesives. Test methods of adhesive bonds of rubber with rubber-fabric materials and metals for resistance to the influence of liquid aggressive media

GOST 9.913-90: Unified system of corrosion and ageing protection. Aluminium, magnesium and alloys. Methods of accelerated corrosion test

GOST 9127-59: Lubricating Grease. Methods for determination of viscosity and tensile strength with plastic viscometer

GOST 9569-79: Paraffin paper

Guidelines 4077-86: Methodological instructions on sanitary-hygienic evaluation of rubber and latex medical devices

IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials

MI 131-77: State system for ensuring uniformity of measurements. Methods of verification and certification of model manganin resistance pressure gauges for high pressures

MI 1673-87: State system for ensuring uniformity of measurements. Stakes and supports for gage heads. Methods of control

MI 1724-87: Guidelines. State system for ensuring uniformity of measurements. Thickness gauge indicator with the price division of 0.01 and 0.1 mm. Method of verification

MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification

MI 1748-87: State system for ensuring uniformity of measurements. Capillary glass viscometers. Method of verification

MI 1790-87: State system for ensuring uniformity of measurements. Small spring measuring heads. Mixers. Verification Method

MI 1799-87: Guidelines. Squares testing 90 degrees. Control method

MI 1812-87: Gages threaded tapered. Methods of control

MI 1813-87: Methodical instructions. State system for ensuring uniformity of measurements. Spring measuring heads. Verification Method

MI 1814-87: Guidelines. State system for ensuring uniformity of measurements. Stenkomery indicator with the price of division 0, 01 and 0.1 mm. Method of verification

MI 1863-88: Guidelines. State system for ensuring uniformity of measurements. The heads are measuring spring-optical. Opticators Method of verification

MI 1876-88: Recommendations. GSE. Multiturn indicators with a scale division of 0.001 and 0.002 mm. Method of verification

MI 1904-88: Threaded cylindrical gauges. Methods of control

MI 1927-88: Recommendation. Calibers are smooth for cylindrical shafts and holes

MI 1928-88: State system for ensuring uniformity of measurements. Indicators lever and gear with the price of division of 0,01 mm. Method of verification

MI 1937-88: Gauges for taper connections. Methods of control

MI 1958-89: State system for ensuring uniformity of measurements. Optimetry. Method of verification

MI 2007-89: State system for ensuring uniformity of measurements. Testing and marking plates. Method of verification

MI 2029-89: Calibration and marking prisms with one prismatic recess and grip. Methods of control

MI 2031-89: Calibration and marking iron prisms. Methods of control

MI 2056-90: Pneumatic plugs for holes from 3 to 160 mm. Methods of control.

MI 2066-90: Sets of accessories to plane-parallel end measures of length

MI 2079-90: Measures of length plane-end exemplary 3 and 5th digits and working classes of accuracy 1-5 up to 100mm.

MI 2131-90: Goniometers with nonius

MI 2153-2001: State system for ensuring uniformity of measurements. Density of oil. Requirements for the method of performing measurements by the areometer with the operations taken into account

MI 2153-2004: State System of Measuring Uniformity Provision. Oil density. Requirements to areometer measurement procedures for discounting

MI 2186-92: Recommendation. GSOEI. Length measures are terminal flat-parallel model 3 and 4th digits and working classes of accuracy 1 - 5 with a length in excess of 100 to 1000 mm. Method of verification

MI 2193-92: Inside calipers, with a scale division of 0.001 and 0.002 mm.

MI 2194-92: State system for ensuring uniformity of measurements. Nutromera indicator with the price of division of 0.01 mm. Methods of verification

MI 2816-2008: Recommendation. State system for ensuring uniformity of measurements. Density converters flow. On-site verification method

MI 2816-2012: Recommendation. State system for ensuring uniformity of measurements. Density converters flow. On-site verification method

MI 524-89: Recommendation. GSE. Stangenzubomery with nonius. Types of SHZN-18, SHZN-40. Method of verification

MI 905-85: State system for ensuring uniformity of measurements. Micrometer pipe. Type MT 15-M. Verification Method

Model series 20.0027: Reinforced Concrete Supports for Joint Suspension of 10 kV Overhead Line Protected Wires and Self-Carrying Insulated Wires of Double-Chain 0.4 kV Overhead Line. Working drawings

MP 203-9-2020: Squares testing 90 degrees of the Calibron trademark. Verification method

MU 5064-89: Methodological guidelines for gas chromatographic measurement of concentrations of solvent gasoline (BR-1, BR-2), fuel (aviation, shale) in the working area

MU 5106-89: Methodological guidelines for gas chromatographic measurement of gasoline content on the skin

OST 108.020.131-85: Steam, Gas and Hydraulic Turbines. General requirements for conservation.

OST 108.988.01-82: Preservation of items of boiler production. Lubricants, inhibitors. Technical requirements.

OST 16-0.684.032-92: Interior electrical installation of electrical products. General technical requirements.

OST 26-07-2047-82: Pipeline fittings. Technology and methods of fastening of sealing rings from fluoroplastic-4 in gates.

OST 37.002.1153-86: Typical technological process sealing isolation and braiding at the ends of electrical wires. Main provisions.

OST 5R.9527-94: Pipes and products of general purpose marine systems. Cleaning and preservation (before installation). Typical processes.

OST 92-1586-89: Marking paints. General requirements for selection, preparation and laying.

PI 1.2.315-89: Production of glazing parts from organic glasses

R 50-54-107-88: Recommendations. Methods for assessing the tribological properties of materials and coatings in vacuum

R 50-54-62-88: Ensuring the durability of products. Method of accelerated assessment of wear resistance of materials for rubbing mates

RD 153-34.1-17.461-00: Methodological guidelines for penetrant testing of welded joints, weld pads and parent metal during manufacturing, installation, operation and repairing of power equipment.

RD 24.023.52-90: Products of chemical engineering. Gumming. Typical technological process.

RD 24.207.05-90: Pipe fittings. Adhesives and sealants. Stamps Basic parameters and conditions of use

RD 24.207.09-90: Pipe fittings. Temporary anti-corrosion protection. General requirements

RD 24-207-05-90: Pipe fittings. Adhesives and sealants. Stamps. Basic parameters and conditions of use

RD 302-07-19-92: Passivation of blanks, casts, assemblies and valve parts of corrosion-proof steel and alloys. Typical technological processes.

RD 31.11.81.36-81: Rules for the sea transportation of oil and oil products in bulk on MMF tankers

RD 31.55.03.07-86: Restoration of cast-iron diesel pistons D100 surfacing. Typical Processes

RD 34.20.506-84: Typical operating and repair instructions for complete switchgears 6 - 10 kV

RD 34.24.602: Standard Procedure. Hardening Blades of Pulverizing Fans Type VM by Automatic Surfacing Method

RD 34.30.508-93: Model Guidelines for Operation of Oil Systems Using Mineral Oil for Turbine Units with Power of 100-800 MW

RD 34.43.104-88: Procedural Guidelines for Adding Additive to Turbine Oil Tp-22s and Tp-30

RD 34.47.605-78: Guidelines for the overhaul of the oil switch VMG-10-630-20 and VMG-10-1000-20

RD 39-1-304-79: Instructions for applying protective coatings on tubing with a cuff method and their use in oil fields

RD 39-30-1333-85: Guidelines for corrosion protection by coatings on the outer surface of field pipelines in permafrost areas in Western Siberia

RD 39-3-944-83: Standard provision for a laboratory that performs oil analyzes during acceptance operations and produced water

RD 50-531-85: Guidelines. Ensuring the durability of products. Method for the experimental evaluation of anti-wear properties of lubricants under friction

RD 50-662-88: Guidelines. Methods of experimental evaluation of the frictional compatibility of friction mate materials

RD 52.04.186-89: Part 1. Guidance on the control of air pollution. Pollution of the atmosphere in cities and other settlements. Main Geophysical Observatory. A.I.Voyeikova (MGO)

RTM 26-07-171-74: Manufacturing Technology of Rubber-Metal Spools for Pipe Fittings

RTM 38 40535-82: Gumming protective coatings

TU 38 105823-78: Rubber parts for cars GAZ and KAMAZ and rubber used for their manufacture

TU 38.303-04-04-90: Organosilicon sealants. Technical conditions

TU 38.401-67-108-92: Gasoline-solvent for the rubber industry. Technical conditions

TU 6-02-I-015-89: Silicone adhesive sealant Elastosil 137-182 heat-conducting

VSN 362-87: Disinfections and Etching of Pipelines

VSN 370-93: Instructions for the installation of electrical wiring in pipes

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Square steel tubes. Range
Language: English
Price: $102.00
imgalt
Design norms for antiseismic atomic power stations
Language: English
Price: $196.02
imgalt
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,514.00
imgalt
Electric locomotives. General technical requirements
Language: English
Price: $282.00
imgalt
Pipeline valves. Leakage rates of valves
Language: English
Price: $499.00
imgalt
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English
Price: $334.00
imgalt
Locomotive and motor rolling stock. Requirements of fire safety
Language: English
Price: $169.00
imgalt
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English
Price: $139.00
imgalt
Oil. General specifications
Language: English
Price: $132.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!