imgalt

GOST 9.029-74

ГОСТ 9.029-74

Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing of resistance to ageing under static deformation of compression

Единая система защиты от коррозии и старения. Резины. Методы испытаний на стойкость к старению под действием статической деформации сжатия

Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to rubber with a hardness of 30 to 95 units according to Shore A. and establishes test methods for resistance to thermal aging under static compression deformation. The essence of the methods lies in the fact that the samples are subjected to static compression deformation and the ability of rubber to maintain elastic properties after aging of the samples in a compressed state under specified conditions is determined by the magnitude of the relative residual deformation. The standard does not apply to sponge rubber.

Стандарт распространяется на резины с твердостью от 30 до 95 единиц по Шору А. и устанавливает методы испытаний на стойкость к термическому старению при статической деформации сжатия. Сущность методов заключается в том, что образцы подвергают статической деформации сжатия и по величине относительной остаточной деформации определяют способность резин сохранять эластические свойства после старения образцов в сжатом состоянии при заданных условиях. Стандарт не распространяется на губчатые резины.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 7/1/1974

SKU: RUSS55936

Price: $79.00

English keywords: climatic tests; rubber;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 19 Tests »

Construction (Max) » Standards » Other state standards used in construction » 83 Rubber, technical rubber, asbestos and plastic industries »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.3 Rubber »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.2 Testing of manufacturing products »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.10 Testing and monitoring products of rubber and plastics industry » 4.10.1 Rubber products »

ISO classifier » 19 TESTS » 19.040 Climatic tests »

National standards » 19 TESTS » 19.040 Climatic tests »

ISO classifier » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.060 Rubber »

National standards » 83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY » 83.060 Rubber »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T9 Unified system of protection against corrosion and aging of materials and products » T99 Test methods »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Unified system of protection against corrosion and aging of materials and products (ESZKS) »

National Standards for OKSTU » RUBBER AND ASBESTOS PRODUCTS » Control methods (testing, analysis, measurements) »


The Document References:

GOST 269-66: Rubber. General requirements for the physical mechanical tests

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 9.024-74: Unified system of corrosion and ageing protection. Rubbers. Methods of heat ageing stability determination

The Document is Referenced By:

GOST 12855-77: Rubber sheet for transformers. Specifications

GOST 14896-84: Rubber u-packing seals for hydraulic devices

GOST 18829-2017: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications

GOST 18829-73: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications

GOST 30778-2001: Rubber compression-types for windows and doors. Specifications

GOST 31362-2007: Compression-type gaskets for window and blocks. Metnod of resistanse to exploitation effects determination

GOST 32020-2012: Elastomeric bearings for bridge building. Specifications

GOST 32586-2013: Vibroinsulators rubber and rubber-reinforced for automotive technic. Specifications

GOST 33724.1-2016: Pneumatic brake equipment of the railway rolling stock. Safety Requirements and Inspection Procedures. Part 1. Air distributors, brake valves, brake units, sealing rubber components

GOST 38-72: Rubber packing rings for joining heads of brake hoses and end cocks of autobrakes. Specifications

GOST 5228-76: Rubber o-rings for the couplings of asbestos-cement pipes. Specification

GOST 5228-89: Rubber o-rings for the couplings of asbestos-cement pipes

GOST 6557-89: Rubber rings for connection fitting. Specifications

GOST 6678-72: Rubber sealing cups for pneumatic apparatus. Specifications

GOST 7338-90: Rubber and rubber-fabric sheets. Specifications

GOST 8752-79: Metal insert rubber seals for rotating. Specifications

GOST 9.067-76: Unified system of corrosion and ageing protection. Vulcanized rubbers for articles operating under conditions of thermal and lightozone ageing. Technical requirements

GOST 9.070-76: Unified system of corrosion and ageing protection. Vulcanized rubbers. Test methods for resistance to attack by liquid corrosive media at static compressive strain

GOST 9.701-79: Unified system of corrosion and ageing protection. Vulcanized rubbers. Test method for radiation ageing resistance

GOST 9.704-80: Unified system of corrosion and ageing protection. Vulcanized rubbers. Methods of determination of the packing parts for the fixed joints working capacity during the radiation-thermal ageing

GOST 9.713-86: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of predicting the change of properties burning heat ageing

GOST R 53820-2010: Motor vehicles. Details of sealing and protective. Technical requirements and test methods

GOST R 53821-2010: Vehicles. Diaphragms and plate membranes. Technical requirements and test methods

GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications

NB ZhT TsP 149-2003: Gaskets for rail fastening railway track. Safety standards

NB ZhT TsV-TsT 078-2003: Rubber sealing elements of rolling stocks brake pneumatic system. Safety norms

ODM 218.2.002-2008: Recommendations for the design and installation of polymer bridge bearing parts

ODM 218.2.025-2012: Expansion joints of automobile bridges

PNST 353-2019: General automobile roads. Expansion joints with rubber compensator spans for road bridges. General specifications

RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries

STB 1538-2013: Technical means of traffic management. Bumps. General specifications

TR 186-07: Technological regulations for the installation of waterproofing keys Aquastop when constructing and restoring waterproofing of deformation and technological joints of concrete in reinforced concrete structures of underground and submerged structures

TU 38 0051166-98: Rubber compounds for the rubber products of aircraft

TU 38 10321-75: Rubber compounds based on silicone rubbers

TU 38 105823-78: Rubber parts for cars GAZ and KAMAZ and rubber used for their manufacture

TU 38-105116-81: Rubber plate for sealing gaskets of vacuum systems

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!