GOST 9128-2009
ГОСТ 9128-2009
|
|
Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications
Смеси асфальтобетонные дорожные, аэродромные и асфальтобетон. Технические условия
Status: Effective - Restored on the territory of the Russian Federation. Rosstandart Order No. 157-st of March 25, 2015 (IUS 7-2015)
This standard applies to asphalt concrete mixtures and asphalt concrete used for the installation of coatings and foundations of highways, airfields, city streets and squares, roads of industrial enterprises in accordance with the applicable building regulations
Настоящий стандарт распространяется на асфальтобетонные смеси и асфальтобетон, применяемые для устройства покрытий и оснований автомобильных дорог, аэродромов, городских улиц и площадей, дорог промышленных предприятий в соответствии с действующими строительными нормами
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
4/22/2010
SKU: RUSS56065
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.68 Road materials »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
National standards »
93 CIVIL CONSTRUCTION »
93.080 Road construction »
93.080.20 Road construction materials »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh18 Road materials »
The Document is Replaced With:
GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications
As a Replacement Of:
GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 11501-78: Petroleum bitumen. Method for determination of depth of penetrometer needle penetration
GOST 11503-74: Petroleum bitumen. Method for the determination of viscosity
GOST 11504-73: Petroleum bitumen. Method for determination of diluent quality vaporized from liquid bitumen
GOST 11505-75: Petroleum bitumen. Method for determination of ductility
GOST 11506-73: Petroleum bitumen. The method of the determination of softening point by ring and ball
GOST 11507-78: Petroleum bitumen. Method for determination of brittle point
GOST 11508-74: Petroleum bitumens. Methods for determination of bitumen adhesion to marble and sand
GOST 11955-82: Road petroleum liquid bitumen. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12801-98: Materials on the basis of organic binders for road and airfield construction. Test methods
GOST 16557-78: Mineral powder for asphaltic-mixtures. Technical requirements
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 18180-72: Petroleum bitumen. Method for determination of change of mass after hitting
GOST 22245-90: Viscous petroleum road bitumens. Specification.
GOST 23735-79: Sandy-gravel mixtures for construction work. Specifications
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 3344-83: Slag crushed stone and slag sand for road construction. Specifications
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-93: Sand for construction works. Specifications
GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST R 52129-2003: Mineral powders for asphaltic concrete and organomineral mixtures. Specifications
SNiP 10-01-94: System of normative documents in construction. Basic provisions.
The Document is Referenced By:
GOST 31424-2010: Non-metallic construction materials from sifting of crusting solid stone in aggregate manufacturing. Specifications
GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications
GOST R 55052-2012: Reclaimed asphalt. Specifications
GOST R 55397-2013: Reinforced bitumen sheets for waterproofing of bridge decks. Preparation of test samples
GOST R 55419-2013: Composite material based on active rubber powder, modifying asphalt mixes. Technical requirements and test methods
Letter 369-OG/03: About the presence of a typo in GOST 9128-2013
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.025-2012: Expansion joints of automobile bridges
ODM 218.2.031-2013: Guidelines for the use of fly ash and ash-and-slag mixtures from coal combustion at thermal power plants in road construction
ODM 218.2.034-2013: Guidelines for the preparation and use of asphalt mix using recycled asphalt
ODM 218.2.042-2014: Guidelines. Warm asphalt mixes. Recommendations for use
ODM 218.2.055-2015: Recommendations for the calculation of drainage systems for road structures
ODM 218.2.056-2015: Guidelines for the design of non-rigid pavements in terms of exposure to heavy freight traffic (for highways I-II categories)
ODM 218.2.079-2016: Recommendations about design macrorough pavings
ODM 218.3.004-2010: Guidelines for the thermal profiling of asphalt concrete pavements
ODM 218.3.016-2011: Guidelines for the determination of fractional segregation of asphalt mixes
ODM 218.3.020-2012: Guidelines for ensuring the stability of bitumen against aging in technological processes of manufacturing and using asphalt concrete mixtures
ODM 218.3.021-2011: Guidelines for the selection of compositions of asphalt mixes, taking into account the effect of adhesive additives on the aging of organic binders in bitumen-mineral mixtures
ODM 218.3.025-2012: Technology of repair and reconstruction of roads using method of cement concrete pavement fragmentation by action of shock-rotational mechanism
ODM 218.3.026-2012: Recommendations for the use of high-density asphalt concrete based on polymer-bitumen binders for road pavements in different climatic conditions of the Russian Federation
ODM 218.3.043-2015: Guidelines for the use of natural belite sludge in the pavement layers
ODM 218.3.054-2015: Device of a surface treatment and thin layers of wear with application of different types of fibers
ODM 218.3.058-2015: Guidelines for the use of synthetic fiber for dispersed reinforcement of hot asphalt concrete
ODM 218.3.082-2016: Guidelines for the appointment of technology and the frequency of work on the device layers of wear and protective layers of road surfaces
ODM 218.3.087-2017: Recommendations for the use of asphalt mixes based on metallurgical slag materials for the conditions of the Central Federal District
ODM 218.3.102-2017: Guidelines for the construction of asphalt pavement under adverse weather conditions
ODM 218.3.108-2019: Guidelines for the application of various methods of compaction of asphalt mixtures in the laboratory
ODM 218.3.112-2019: Guidelines for the development and approval of technological regulations for production at the enterprises of the road sector
ODM 218.5.001-2014: Guidelines for the quality control of asphalt concrete in laboratory and production conditions using impact compactor
ODM 218.9.079-2016: Recommendations about design macrorough pavings
PNST 265-2018: Automobile roads of general use. Flexible pavement design
PNST 309-2018: Roads are public. Bridges and pipes road. Technical requirements
PNST 362-2019: General automobile roads. Cold asphalt mixes and asphalt mixes. Technical conditions
RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings
RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas
RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings
SNiP I-D.2-70: Car roads. Materials and products
SP 121.13330.2012: Aerodromes
SP 122.13330.2012: Railway and highway tunnels
SP 225.1326000.2014: Station buildings, structures and devices
SP 243.1326000.2015: Design and construction of low-volume roads
SP 262.1325800.2016: Container yard and terminal devices in industrial and transport manufacture. Terms of design and construction
SP 316.1325800.2017: Container terminals. Regulations of projecting
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 37.13330.2012: Industrial transport
SP 46.13330.2012: Bridges and pipes
SP 78.13330.2012: Automobile roads
|
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
