GOST 8420-74

ГОСТ 8420-74

Paint and lacquer materials. Method for determination of relative viscosity

Материалы лакокрасочные. Методы определения условной вязкости

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Resolution of the State Standard No. 3821 of 09.29.87

The standard applies to paints and varnishes and related products - Newtonian or liquids approaching them (semi-finished products, resins, etc.).

Стандарт распространяется на лакокрасочные материалы и относящиеся к ним продукты - ньютоновские или приближающиеся к ним жидкости (полуфабрикаты, смолы и т.д.).

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: State Committee of Standards of the Council of Ministers of the USSR, 5/17/1974

SKU: RUSS56092

Price: $103.00

English keywords: lucky; paints; paints and varnishes;



The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 87 Paint and varnish industry »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.3 Products of paint and varnish industry »

ISO classifier » 87 PAINT AND VARNISHING INDUSTRY » 87.040 Paints and varnishes »

National standards » 87 PAINT AND VARNISHING INDUSTRY » 87.040 Paints and varnishes »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L1 Inorganic chemical products » L19 Test methods. Packaging. Marking »

National Standards for OKSTU » PAINT MATERIALS, SEMI-PRODUCTS, FILM, PHOTO AND MAGNETIC MATERIALS AND HOUSEHOLD CHEMICALS » Paints and varnishes »


As a Replacement Of:

GOST 8420-57: Paints and varnishes. Test methods. Determination of the nominal viscosity

The Document References:

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 21743-76: Aviation oils

GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity

GOST 33-82: Petroleum products. Method for determination of kinematic viscosity and calculation of dynamic viscosity

GOST 3722-81: Rolling bearings. Balls. Technical requirements

GOST 6259-75: Reagents. Glycerin. Specifications

GOST 6613-86: Square meshed woven wire gauzes

GOST 6824-96: Distilled glycerin

GOST 9070-75: Viscometers for determination of relative viscosity of paint and lacquer materials. Specifications

GOST 982-80: Transformer oils

GOST 9980.2-86: Paint materials. Test sampling

The Document is Referenced By:

GOST 10144-74: Enamels ХV-124 and ХV-125. Specification

GOST 10144-89: Enamels XB-124Specifications

GOST 10277-90: Putties. Specifications

GOST 10503-71: Oil paints, ready for use. Specifications

GOST 10760-76: Electrical insulating varnish ВЛ-941. Specifications

GOST 10772-78: Antipenetration water-based washes

GOST 10982-75: Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications

GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications

GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications

GOST 12172-2016: Phenol-polyvinylacetyl adhesives. Specifications

GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications

GOST 12294-66: Electrical insulating impregnation varnish ФЛ-98. Specifications

GOST 12549-2003: Passenger cars of 1520 mm gauge main-line railways. Painting. Specifications

GOST 12707-77: Wash primers. Specifications

GOST 1347-77: Varnish БТ-783. Specifications

GOST 13489-79: Sealants, marks У-30M and УТ-31. Specifications

GOST 13522-78: Synthetic latex ДMMA-65 ГП. Specifications

GOST 13835-73: Low-molecular thermal shock resistant synthetic rubber СКТН. Specifications

GOST 14147-80: Varnish ФЛ-559. Specifications

GOST 14231-88: Urea-formaldehyde resins. Specifications

GOST 14923-78: Enamels ПФ-223. Specifications

GOST 15030-78: Varnish KФ-965. Specifications

GOST 15080-77: Synthetic latex БC-50. Specifications

GOST 15081-78: Silico-organic thermostable varnish KO-08. Specifications

GOST 15865-70: Insulating varnish MЛ-92. Specifications

GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications

GOST 15943-80: Electrical insulating enamel ЭП-91. Specifications

GOST 16302-79: Primer ФЛ-086. Specifications

GOST 16508-70: Insulating silicon varnishes. Specifications

GOST 1709-75: Coal-tar vanishes. Specifications

GOST 18099-78: Enamels ML-152. Specifications

GOST 18335-83: Enamel НЦ-184. Specifications

GOST 18374-79: Enamels XB-110 and XB-113. Specifications

GOST 18694-80: Hard phenol formaldehyde resins. Specifications

GOST 18958-73: Silicate paints

GOST 19024-79: Enamels AC-182. Specifications

GOST 190-78: Drying oil

GOST 19214-80: Water dispersion paints for interior works. Specifications

GOST 19279-73: Polymer-cement paints

GOST 20481-80: Enamels MЛ-1110. Specifications

GOST 20824-81: Varnish ЭП-730. Specifications

GOST 20833-75: Water-dispersion paints for exterior works. Specifications

GOST 20907-2016: Liquid phenolformaldehyde resins. Specifications

GOST 20907-75: Liquid phenol formaldehyde resins. Specifications

GOST 21227-93: Enamels ПФ-218. Specifications

GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications

GOST 22345-77: Heat-resistant adhesive BC-10T. Specifications

GOST 22369-77: Enamels ЭП-567. Specifications

GOST 22438-85: Enamels ЭП-525. Specifications

GOST 22564-77: Enamels KO-84 and KO-859. Specifications

GOST 23122-78: Enamels KO-811 and KO-811K. Specifications

GOST 23123-78: Silvery enamel KO-83. Specifications

GOST 23143-78: Enamels ЭП-773. Specifications

GOST 23143-83: Enamels ЭП-773. Specifications

GOST 23171-78: Enamel AK-512. Specifications

GOST 23343-78: Primer ГФ-0119. Specifications

GOST 23438-79: Varnishes of type ПЭ-232, ПЭ-250, ПЭ-250М, ПЭ-250ПМ. Specifications

GOST 2346-78: Enamel BT-123. Specification

GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications

GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications

GOST 23626-79: Emali HV-714. Tehnicheskie usloviya

GOST 23760-79: Enamels MЧ-145. Specifications

GOST 23832-79: Varnishes AK-113 and AK-113Ф. Specifications

GOST 24064-80: Mastics adhering rubber. Specifications

GOST 24285-80: Sealant of marks УТ-34. Specifications

GOST 24329-80: Modified wood. Modification methods

GOST 24595-81: Primer B-MЛ-0143. Specifications

GOST 24709-81: Enamels ЭП-140. Specifications

GOST 24784-81: Enamels ПФ-188. Specifications

GOST 25129-82: Primer GF-031. Specifications

GOST 25428-82: Fluoroplast-42. Specifications

GOST 25718-83: Primers AK-069 and AK-070. Specifications

GOST 26319-84: Dangerous cargoes

GOST 26910-86: Antiseptic water-proof compounds for protection of timber butt-ends. Specifications

GOST 27271-2014: Paint and varnish materials. The method of determining the viability of multi-component systems

GOST 27271-87: Paints and varnishes. Method for control of working life

GOST 27952-2017: Polyester resins unsaturated. Technical conditions

GOST 27952-88: Unsaturated polyester resins. Specifications

GOST 28196-89: Water-dispersion paints

GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications

GOST 30535-97: Polymeric adhesives. Nomenclature of indices

GOST 30884-2003: Ready-mixed oil paints. General specifications

GOST 31093-2003: Paints and varnishes for furniture. General specifications

GOST 312-79: Varnish БТ-5100. Specifications

GOST 31365-2008: Paint coatings electrolocomotives and diesellocomotives of 1520 mm gauge mainline railways. Specifications

GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST 31847-2012: Wheel sets for the special-purpose rolling stock. General specifications

GOST 31939-2012: Paint materials. Determination of non-volatile-matter mass fraction

GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works

GOST 32389-2013: Boiled oils. General specifications

GOST 32829-2014: Automobile roads of general use. Road marking materials. Methods of testing

GOST 33290-2015: Paint materials used in building. General specifications

GOST 33354-2015: Paint materials being in contact with food products. General specifications

GOST 34277-2017: Materials and systems for the protection and repair of concrete structures. Requirements for anchoring compositions and adhesion-strength fastenings of reinforcement elements

GOST 4559-2017: Liquid bakelite. Specifications

GOST 4559-78: Liquid bakelite. Specification

GOST 4976-83: Furniture lacquers НЦ-218, НЦ-222, НЦ-243 and НЦ-223. Specifications

GOST 5406-84: Enamels НЦ-25. Specifications

GOST 5470-75: Lacquers of ПФ-283 and ГФ-166 types. Specifications

GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications

GOST 5971-78: Enamels for instruments. Specifications

GOST 6244-70: Electrical insulating impregnating varnishes БТ-987, БТ-988. Specifications

GOST 6465-76: Enamels PF-115. Specifications

GOST 64-77: Enamels ГФ-230 BЭ. Specifications

GOST 6631-74: Enamels НЦ-132. Specifications

GOST 6745-79: Enamel ГФ-1426. Specifications

GOST 6757-96: Technical castor oil. Specifications

GOST 6993-79: Enamels HV-1100. Specification

GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications

GOST 7409-2009: Freight cars. Requirements to paint coatings

GOST 7409-2018: Freight cars. Requirements to paint coatings and corrosion protection and methods of their control

GOST 7462-73: Enamels НЦ-5123. Specifications

GOST 7931-76: Natural drying oil

GOST 8017-74: Lacquer БT-99. Specifications

GOST 8018-70: Electrical insulating impregnating varnish ГФ-95. Specifications

GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods

GOST 9.406-84: Unified system of corrosion and ageing protection. Organic-silicate coatings. Technical requirements and methods of tests

GOST 901-2017: Bakelite lacquers. Specifications

GOST 901-78: Bakelite lacquers. Specifications

GOST 9070-75: Viscometers for determination of relative viscosity of paint and lacquer materials. Specifications

GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications

GOST 9151-75: Enamels of types ГФ-92. Specifications

GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications

GOST 926-82: Enamels ПФ-133. Specifications

GOST 9355-81: Primer HS-010. Enamel HS-710. Lacquer HS-76. Specification

GOST 9640-75: Enamels ЭП-51

GOST 9640-85: Enamels ЭП-51. Specifications

GOST 9754-76: Enamels MЛ-12 type. Specifications

GOST 9980.3-2014: Materials of paint and varnish and auxiliary, raw materials for paint and varnish materials. Packing

GOST 9980.4-2002: Paint materials. Marking

GOST 9980.4-86: Paint materials. Marking

GOST R 50535-93: Paints and varnishes. Methods for the determination of volume of non-volatile matters

GOST R 50563.2-93: Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using an oscillatory shaking machine

GOST R 50563.4-93: Pigments and extenders. Methods of dispersion for assessment of dispersion characteristics. Dispersion using a bead mill

GOST R 51037-97: Protective polymer coatings for insulation, localization, localization dust suppression and deactivation. General technical requirements

GOST R 51691-2000: Paint materials. Enamels. General specifications

GOST R 51691-2008: Paint materials. Enamels. General specifications

GOST R 51692-2000: Boiled oils. General specifications

GOST R 51693-2000: Anticorrosion primers. General specifications

GOST R 51775-2001: Wheel sets for the special-purpose rolling stock. General specifications

GOST R 52020-2003: Water dispersible paint materials. General specifications

GOST R 52165-2003: Paint materials. Varnishes. General specifications

GOST R 52487-2005: Paint materials. Determination of non-volatile-matter mass fraction

GOST R 52487-2010: Paint materials. Determination of non-volatile-matter mass fraction

GOST R 52491-2005: Coating materials, used in building. General specifications

GOST R 52576-2006: General use highways. Road marking materials. Test methods

GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST R 53202-2008: Paint materials being in contact with food products. General specifications

GOST R 53653-2009: Paint materials. Method for determination of the pot life of multicomponent systems

GOST R 54893-2012: Passenger cars on locomotive traction and motor-cars. Lacquer and antidischarge coating reguirements.

GOST R 55436-2013: Gas distribution systems. Coatings with extruded polyethylene on steel pipes. General technical requirements

GOST R 56963-2016: Locomotives. Lacquer and antidischarge coating requirements and methods of their control

GOST R 58284-2018: Oil and gas industry. Marine field facilities and pipelines. General Requirements for Corrosion Protection

GOST R 58478-2019: Guidance on the application of hazard classification criteria for chemical products by their effects on the body. Aspiration hazard

GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions

GOST R 70087-2022: Water-dispersion paints for facade thermal insulation composite systems with exterior plaster layers. Technical specifications

Manual: Manual for impulse and low consumption fire extinguishing systems

ODM 218.2.003-2007: Recommendations for the use of polymer-bitumen binders based on SBS-type block copolymers in the construction and reconstruction of roads

ODM 218.3.039-2014: Recommendations for testing film-forming materials for the care of freshly laid concrete

ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei

ODM 218.4.002-2009: Recommendations for protection against corrosion of structures used on the roads of the Russian Federation bridges, fences and road signs

ODM 218.5.008-2008: Methodical recommendations on the use of a crack-interrupting layer when constructing road pavements with a polymer-asphalt-concrete coating (for experimental implementation)

Order NA-16/282: Recommendations for the use of lignodor to improve the transport and operational qualities of gravel pavements

OST 92-1586-89: Marking paints. General requirements for selection, preparation and laying.

OST 92-9440-81: Conducting lacquer coating. Technical requirements and typical technological processes.

RD 153-34.1-40.504-00: Procedural Guidelines for Optimal Corrosion Protection of Storage Tanks and Protection of the Water in Them Against Aeration

RD 24.202.03-90: Weatherproof lacquer coating for oil and gas processing equipment. Technical requirements.

RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions

RD 34.20.325: Procedural Guidelines for Bench Tests of Anticorrosion Coatings for Underground Heat Distribution Lines

RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities

RD GM-01-02: Guidance Document for Corrosion Protection of Mechanical Equipment and Special Steel Structures of Hydraulic Structures

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RSN 40-81: Instructions for use of organosilicate compositions for corrosion protection of metal and other building structures, process equipment and decoration finishes of the building materials and facades of buildings

RU 1.2.1.14.001-2012: Guidance for the repair of concrete, reinforced concrete constructions and hydrotechnical constructions of nuclear power plant stations

Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy

SanPiN 1.2.681-97: Hygienic requirements for production and safety of perfumes and cosmetics

SP 31-111-2004: The use of glass reinforcing meshes and ribbons in buildings

SP 470.1325800.2019: Steel structures. Work Rules

SP 53-101-98: Manufacturing and quality control of steel structures for construction

ST RK 1325-2005: Milk product with iodine additive Sheten. Specification

ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions

STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions

TR 149-03: Technical recommendations on the technology of using the complex of specialized finishing materials for the renovation of external and internal surfaces during reconstruction and major repairs of buildings

TR 84-98: Technical recommendations for the application of finishing systems of paints and varnishes on exterior wall panels that are molded "face down"

TR 85-98: Technical recommendations on input quality control of materials used for facade finishing

TR 89-99: Technical recommendations for the manufacture and use of building paints and varnishes from the Inteko system for factory and construction conditions

TR 94.11-05: Technological regulation of the operational quality control of construction, installation and special works during the construction of buildings and structures. 11. Painting and wallpaper production

TU 102-107-76: Boxes of unified with hinged panels of BNP type (construction part of block-boxes)

TU 102-59-75: Building part of unified block-boxes with hinged BNP panels

TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions

TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions

TU 38-103508-81: Silicone compounds. Type

TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines

TU 6-02-616-88: T-111 Resin

TU 6-05-966-76: BFT brand binder

TU 6-10-1052-75: Enamel VL-515 red-brown

TU 6-10-1117-85: Primer EP-057 Protector

TU 6-10-1539-76: EP-572 Enamel of various colors

TU 6-10-741-79: PF-167 enamel of various colors

TU 6-10-778-76: Enamel FL-412 (former FL-723) FL-61 (former FL-724) silver

TU 6-10-866-85: Lucky VL-725, VL-725 G and enamel VL-725 aluminum

VSN 008-88: Construction of trunk and field pipelines. Anticorrosion and heat insulation

VSN 35-86: Guidelines for Installation of Plastic Piping at USSR Gosagroprom Facilities

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!