GOST 25718-83
ГОСТ 25718-83
|
|
Primers AK-069 and AK-070. Specifications
Грунтовки АК-069 и АК-070. Технические условия
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1668 of 10.29.91
The standard applies to primers AK-069 and AK-070, which are a suspension of pigments in a solvent of acrylic resins and an organic solvent mixture with the introduction of additives and plasticizers. Primer AK-069 is designed for priming parts made of al
Стандарт распространяется на грунтовки АК-069 и АК-070, представляющие собой суспензию пигментов в растворителе акриловых смол и смесиорганических растоврителей с введением добавок и пластификаторов. Грунтовка АК-069 предназначена для грунтования деталей
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
4/14/1983
SKU: RUSS56212
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
87 Paint and varnish industry »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L25 Organic solvents, drying oils, primers »
National Standards for OKSTU »
PAINT MATERIALS, SEMI-PRODUCTS, FILM, PHOTO AND MAGNETIC MATERIALS AND HOUSEHOLD CHEMICALS »
Varnishes, enamels, primers and putties based on polymerization resins »
The Document is Replaced With:
GOST 25718-2022: Primers AK-069, AK-070 and AK-070 M. Technical conditions
As a Replacement Of:
OST 6-10-401-76: Primers AK-069 and AK-070. Technical conditions
The Document References:
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.3.005-75: Painting works
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 13345-85: Tin-plate and black plate
GOST 14192-96: Cargo marking
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials
GOST 18188-72: Solvents of grades 645, 646, 647, 648 for paint materials. Specifications
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 19433-88: Dangerous goods. Classification and marking
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 23955-80: Paint materials. Methods for determination of acid value
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 5799-78: Flasks for paints and varnishes. Specifications
GOST 6128-81: Metal cans for chemical products
GOST 6589-74: Paintwork materials. Method for determination of grind degree by grindmeter 'Klin'
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 7827-74: Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods
GOST 9980.1-86: Paint materials. Rules of acceptance
GOST 9980.2-86: Paint materials. Test sampling
GOST 9980.3-86: Paint materials. Packing
GOST 9980.4-2002: Paint materials. Marking
GOST 9980.5-86: Paint materials. Transportation and storage
GOST R 52487-2005: Paint materials. Determination of non-volatile-matter mass fraction
GOST R 52753-2007: Paint materials. Method for determination of fineness of grind
The Document is Referenced By:
GOST 10144-89: Enamels XB-124Specifications
GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications
GOST 16302-79: Primer ФЛ-086. Specifications
GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications
GOST 22438-85: Enamels ЭП-525. Specifications
GOST 22896-77: Paint coatings for electric locomotives of 1520 mm gauge main line railways. Specifications
GOST 22947-78: Paint coatings for diesel locomotives of 1520 mm gauge main line railways. Specifications
GOST 23626-79: Emali HV-714. Tehnicheskie usloviya
GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties
GOST 28613-90: Paint coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control
GOST 6572-91: Paint Coatings Of Tractors And Agricultural Machinery General Specifications
GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing
GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors
GOST 9.401-89: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with tropical climate. General requirements and methods of accelerated testing
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.404-81: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with cold climate. General requirements and methods of accelerated testing
GOST R 50398-92: Fire hydraulic elevator. Specifications
GOST R 50401-92: Suction gauzes. Specifications
GOST R 50408-92: Foam mixers. Specifications
GOST R 54893-2012: Passenger cars on locomotive traction and motor-cars. Lacquer and antidischarge coating reguirements.
GOST R 55779-2013: Cases of cumulative punches. Technical conditions
GOST R 56963-2016: Locomotives. Lacquer and antidischarge coating requirements and methods of their control
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
Letter 10142/07-AS: On the application of standards
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
R 50-127-92: Recommendations. The designs are the basic carriers of radio-electronic means. Restrictive list of types of coatings
RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions
TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.