Inside micrometers. Specifications
Нутромеры микрометрические. Технические условия
Status: Effective - Supersedes. IUS 1-1989 Limitation of effectiveness lifted: Minutes No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard applies to micrometric inside micrometers with a division value of 0.01 mm for measuring internal dimensions from 50 to 6000 mm.
Стандарт распространяется на микрометрические нутромеры с ценой деления 0,01 мм для измерения внутренних размеров от 50 до 6000 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
10/21/1988
SKU: RUSS56523
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P5 Instruments, tools and devices for linear, angular, profile and spatial measurements »
P53 Instruments for measuring lengths (outer and inner dimensions) »
As a Replacement Of:
GOST 10-75: Inside micrometers. The main parameters. Technical requirements
The Document References:
GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage
GOST 17215-71: Micrometric hole gauges. Methods and means of verification
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.610-2006: Unified system for design documentation. Rules for making exploitative documents
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements
The Document is Referenced By:
GOST 10767-87: Automatic machines for thermoplastic and thermosofting materials. Parameters and dimensions. Norms of accuracy
GOST 10767-98: One position thermoplast and thermosetting plastic working automatic machines. Basic parameters and dimensions. Norms of accuracy
GOST 12393-2019: Rail contact network fittings linear. General specifications
GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 22689-2014: Polyethylene pipes and fittings for waste discharge inside the buildings. Specifications
GOST 23117-91: Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications
GOST 24950-2019: Curved bends and curve inserts on bends of the linear part of steel pipelines. Technical specifications
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 32412-2013: Unplasticized polyvinylchloride pipes and fittings for waste discharge inside the buildings. Specifications
GOST 32413-2013: Unplasticized polyvinylchloride pipes and fittings for sewerage and drainage systems outside the buildings. Specifications
GOST 32414-2013: Polypropylene pipes and fittings for waste discharge inside the buildings. Specifications
GOST 32661-2014: Fibrе reinforced thermosetting plastic pipes and parts of pipelines. General specifications
GOST 32972-2014: Plastic manholes for sewerage and drainage systems. Specifications
GOST 33007-2014: Scrubber and duster equipment. Methods for determination of dust load of gas streams. General technical requirements and control methods
GOST 7370-2015: Railway frogs. Specifications
GOST 8.346-2000: State system for ensuring the uniformity of measurements. Steel horizontal cylindrical tanks. Calibration methods
GOST 8617-2018: Pressed sections of aluminium and aluminium alloys. Specifications
GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications
GOST R 50820-95: Scrubber and duster equipment. Methods of determination of dust load of gas-and-dust streams
GOST R 54475-2011: Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure
GOST R ISO 230-1-2010: Machine tools tests. Part 1. Measurement techniques of geometrics parameters
MI 1652-90: State system for ensuring uniformity of measurements. Ultrasonic flowmeters with counter "Akustron" model UZR-V. Method of verification
MI 2190-92: State system for ensuring uniformity of measurements. Shtangenreysmasy. Method of verification
MI 2983-2006: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic Flow Meters - Ultrasonic Meters UFM 500. Verification Methodology
MU 0898-00.001: Methods of conducting non-destructive testing of hooks of lifting and transport equipment (automobile, tractor, trailer cranes and crane beams)
MU 2002-2002: Methodology for examining the technical condition of cabinet elevators for drill and casing KM type and cast elevators for casing EN type to determine the possibility of their further operation
MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life
OST 1 90113-86: Pressed sections of aluminium alloys. Specifications.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
RD 03-421-01: Guidelines for the diagnosis of the technical condition and the determination of the residual service life of vessels and apparatus
RD 153-34.0-45.510-98: Model Guidelines for Operation and Repair of Slip Rings and Brushes of Turbine Generators with Power of 63 MW and Above
RD 16.407-2000: Explosionproof electrical apparatus. Repair
RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations
RD 34.10.103: Industry-Specific Specified Quantity Allowance for Tools, Equipment, Materials, and Aids for Repair and Rehabilitation of Gas Cleaning Equipment of Thermal Electric Powers
RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment
RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm
RD 34.41.601: Guide to Overhaul of Mud Pumps
RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above
RD 50-411-83: Methodological instructions. liquids and gases flow rate. Measurement technique using special orifices.
RD 50-98-86: Methodological instructions. Selecting universal means of dimensional measurement up to 500 mm (application as per GOST 8.051-81).
RD 51-553-94: Instructions for technical certification of gas accumulators GSS-1-1-10,0-25U-001 during the operation of gas filling stations of gas compressor stations (AGNKS)
RSN 90-85 Gosstroj LitSSR: Instructions for the installation of monolithic floors of livestock buildings of sawdust-cement latex
TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair
TU 34-38-20120-94: Pipelines of station thermal stations. General technical conditions for major repairs
TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair
TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs
TU 3742-001-10995136-98: All-welded ball valves. Technical conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.