GOST 10905-86
ГОСТ 10905-86
|
|
Surface plates and face-plates. Specifications
Плиты поверочные и разметочные. Технические условия
Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)
The standard applies to testing and marking plates of cast iron and hard rock sizes up to 2500x1600 mm.
Стандарт распространяется на поверочные и разметочные плиты из чугуна и твердокаменных пород размерами до 2500х1600 мм.
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 8
Approved: Gosstandart of the USSR,
1/27/1986
SKU: RUSS56524
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P5 Instruments, tools and devices for linear, angular, profile and spatial measurements »
P52 Instruments and tools for controlling roughness, shape and location of surfaces »
National Standards for OKSTU »
TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS »
Tool for checking straightness, flatness and squareness »
As a Replacement Of:
GOST 10905-75: Surface plates and face-plates. Technical requirements
The Document References:
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 1412-85: Flakish graphite cast iron
GOST 14192-96: Cargo marking
GOST 1574-91: Metal-cutting machine tools. Machined T - slots. Dimensions
GOST 2.601-95: Operational documents
GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3560-73: Sealing tepe
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9012-59: Metals. Method of Brinell hardness measurement
MI 2007-89: State system for ensuring uniformity of measurements. Testing and marking plates. Method of verification
The Document is Referenced By:
GOST 1005-86: Wooden plank panels for the factory-made timber frame houses
GOST 10153-70: High refractory silicon carbide products. Specifications
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10352-80: Refractories for ships' boiler furnaces. Specifications
GOST 10381-75: High-refractory mullite bricks for blast furnace bottom lining
GOST 10381-94: High-refractory mullite bricks for blast furnace bottom lining. Specifications
GOST 10403-80: Constructional steel trowels. Technical requirements
GOST 10632-2007: Wood particle boards. Specifications
GOST 10632-2014: Wood particle boards. Specifications
GOST 10632-89: Wood particle boards
GOST 10663-88: Automatic straightening and cutting machines for round steel, model steel and reinforcement. Parameters and dimensions. Accuracy norms
GOST 10767-87: Automatic machines for thermoplastic and thermosofting materials. Parameters and dimensions. Norms of accuracy
GOST 10767-98: One position thermoplast and thermosetting plastic working automatic machines. Basic parameters and dimensions. Norms of accuracy
GOST 10888-76: Periclasechromite refractories for the steel melting furnace roofs
GOST 10888-93: Periclasechromite refractories products for the steel melting furnace roofs. Specifications
GOST 10958-2018: Protective glasses for devices of general industrial application. Specifications
GOST 10958-78: Protective glasses for apparatus of general industrial application. Specifications
GOST 1153-2019: Brackets for washbasins and sinks. Technical specifications
GOST 11945-78: Vulcanized fibre tubes. Specifications
GOST 13236-83: Electrotechnical periclase powders. Specifications
GOST 13240-78: Blanks of optical glass. Specifications
GOST 13403-77: Covers made of refractory compounds for thermoelectric thermometers. Specification
GOST 13448-82: Plastic ventilation grilles. Technical conditions
GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 14832-79: Refractory forsterite and forsteritechromite products. Specifications
GOST 14832-96: Refractory forsterite and forsteritechromite products. Specifications
GOST 15635-70: Refractory fire-clay products for hot-metal transfer ladles lining. Specifications
GOST 1566-96: Refractory silica products for electrical steel melting furnaces. Specifications
GOST 1598-75: Fireclay refractory products for blast furnaces. Specifications
GOST 15987-91: Wooden bodied planes
GOST 1598-96: Fireclay refractory products for blast furnaces. Specifications
GOST 16518-96: Machine vice with hand and mechanical drives
GOST 1663-2016: Glasses for liquid level indicators. Specifications
GOST 1663-81: Glasses for liquid level indicators. Specifications
GOST 17041-77: Rulers for drawing instruments. Specifications
GOST 17151-2019: Utensils made of sheet aluminum. General specifications
GOST 17435-72: Drawing rulers. Specifications
GOST 17608-2017: The concrete paving slabs. Specifications
GOST 18064-2016: Solid carbide boring tools with steel shank. Specifications
GOST 18297-96: Pig-iron enameled sanitary devices. Technical conditions
GOST 18326-87: Low-alloyed zinc sheets for one-stage and multistage etching. Specifications
GOST 18578-89: Builders axes. Specifications
GOST 18975-86: Knife for finishing works. Specification
GOST 19147-82: Skiing sticks. Specifications
GOST 19437-2019: Cylindrical aluminum ingots. Technical specifications
GOST 19437-81: Cylindrical aluminium ingots. Specifications
GOST 20558-82: Steel zinc-coated houseware items. General specifications
GOST 20900-75: Copper and brass rectangular waveguide tubes
GOST 20901-75: Refractory and high-refractory products for laying of stoves and hot blast mains of blast furnaces. Specifications
GOST 21436-75: Refractory and highly-refractory articles for the lining of rotary furnaces. Specifications
GOST 21519-84: Windows, balcony doors, shop-windows and stained glass panels of aluminum alloys
GOST 21546-88: Hammer dies for die forging
GOST 22082-76: Injection mould bases, detail-blanks and details of injection moulds. Specifications
GOST 22357-87: Figure skates. General specifications
GOST 22358-87: Racing and hockey skates. General specifications
GOST 22366-93: Iron-based sintered filler ribbon electrode
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 23695-2016: Enamelled steel sanitary appliances. Specifications
GOST 23695-94: Enamelled steel sanitary appliances. Specifications
GOST 23949-80: Welding non-consumable tungsten electrodes specifications.
GOST 24145-80: Domestic containers for bread. General specifications
GOST 24179-80: Glass filters, filter-lenses, lenses, light diffusers and deflecting glass inserts for railway transport light-signals
GOST 24320-2018: Utensils and covers of copper-nickel and copper-nickel-zinc alloys with silver or gold coating. General specifications
GOST 24320-80: Tableware made of cupronickel and nickel silver coated with silver or gold
GOST 24704-94: Corundum and high alumina refractory products. Specifications
GOST 24788-2018: Enamelled steel kitchen utensils. General specifications
GOST 24980-2005: Glass containers. Methods of testing the parameters
GOST 25088-81: Ship's doors. Specifications
GOST 25088-98: Ship's doors. Specifications
GOST 25309-94: Covers of access hatches. Specifications
GOST 25310-94: Covers of skylights. Specifications
GOST 25782-90: Derbies, floats, semifloats. Specifications
GOST 25858-83: Surface density and thickness measures for radioisotope thickness gauges. Specifications
GOST 26220-84: Aerosol aluminum mono-block bulbs
GOST 26221-84: Scattering suppressing linear rasters for medical roentgen apparatuses
GOST 26613-2016: Lathe tools with mechanically clamped changeable indexable inserts. Specifications
GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates
GOST 26665-91: Metal bodied planes. Technical specifications
GOST 26816-2016: Cement-bonded wood boards. Specifications
GOST 26816-86: Cement-bonded wood boards. Specifications
GOST 26877-2008: Metal products. Methods of measuring form variations
GOST 26877-91: Metal products
GOST 27002-86: Cooking utensils from corrosion-resistant steel
GOST 27180-2001: Ceramic tiles. Test methods
GOST 28468-90: Refractory products for electric-arc steel-melting furnace lining. Specifications
GOST 2848-75: Tapers of tools. Tolerances. Methods and means of control
GOST 28637-90: Bristle brush articles. Check methods
GOST 30003-93: Metals. Cylindrical bending test of sheets and strips less than 2,5 mm thick
GOST 30407-2019: Glass dishes for food and drinks. General specifications
GOST 30407-96: Glass tableware and decorative articles
GOST 30629-2011: Materials and products facing of rocks. Test methods
GOST 30629-99: Cladding materials and products made of natural stone. Test methods
GOST 30673-2013: Polyvinylchloride profiles for windows and doors. Specifications
GOST 30762-2001: Refractory products. Methods of measuring geometrical dimensions, defects of shape and surfaces
GOST 31.111.41-93: Parts and assembly units of universal assembly devices for metal-cutting machines. Basic parameters. Constructive elements. Norms of accuracy
GOST 31.211.41-93: Parts and assembly units of collapsible fixtures for assembly and welding
GOST 3191-82: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications
GOST 3191-93: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications
GOST 32274-2013: Monostructural fibreboards. Specifications
GOST 32289-2013: Wood particleboards, laminated with paper impregnated with thermosetting resins
GOST 32309-2019: Dishes without non-stick coating cast from aluminum alloys. General specifications
GOST 32399-2013: Waterproof Wood Chipboards. Technical Specifications
GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications
GOST 32548-2013: Ventilation for buildings. Air terminal devices. General specifications
GOST 32674-2014: Glass containers. Sizes. Control methods
GOST 32680-2014: Head current collection elements of pantographs of electric vehicle. General specification
GOST 3272-2002: Aluminosilicate refractories for lining of cupola furnaces. Specifications
GOST 3272-71: Fireclay and semiacid refractories for lining of cupola furnaces. Specifications
GOST 32913-2014: Draft gears of coupler and automatic coupler devices of railway rolling stock. Technical specifications and acceptance rules
GOST 33185-2014: Bars for insulating joints rails. Safety requirements and testing methods
GOST 33187-2014: Disk springs for rail joints. Specifications
GOST 33221-2015: Bottles from polyethylene terephthalate for chemical products. General specifications
GOST 33756-2016: Plastic consumer packaging. General specifications
GOST 33810-2016: Metal barrels for food liquids. Specifications
GOST 33837-2016: Polymeric packaging for food products. General specifications
GOST 34099-2017: Izdeliya sanitarno-gigienicheskie iz metalla dlya detej i podrostkov. Tehnicheskie usloviya
GOST 34117-2017: Cookware and tableware made of corrosion-resistant steel for children and teenagers. Technical conditions
GOST 34264-2017: Polymeric transport containers. General specifications
GOST 34525-2019: Stainless steel sinks. Technical conditions
GOST 3875-83: Steel card wire
GOST 390-96: Fireclay and semiacidic refractory articles general-purpose and mass production. Specifications
GOST 3910-75: Refractory silica products for brickwork of glassmaking furnaces. Specifications
GOST 4071.1-94: Refractory products with a true porosity of less than 45%. Determination of cold compressive strength
GOST 4097-78: Cans for motion-picture rawstock, magnetic tapes and film materials. Specifications
GOST 4157-79: Silica brick refractories. Specifications
GOST 4598-2018: Fibre boards by wet way of production. Specifications
GOST 4598-86: Fibre boards. Specifications
GOST 4689-94: Periclase refractories. Specifications
GOST 473.6-81: Chemically resistant and heat resistant ceramic wares. The method for determination of compression strength
GOST 5040-78: Light-weight heat-insulating refractory and high-refractory products. Specifications
GOST 5040-96: Lightweight heatinsulating refractory and high-refractory products. Specifications
GOST 5341-98: Alumino-silicate refractories for linings of steel-teeming ladles. Specifications
GOST 5381-93: High refractory chromepericlase products. Specifications
GOST 5384-89: Knuckle-joint cold stamping presses. Parameters and dimensions. Dimensions and arrangement of the slots and openings for fixing the tools. Norms of accuracy
GOST 5500-2001: Stopper refractories for steel pouring from ladle. Specifications
GOST 5500-75: High-duty and refractories for steel pouring. Specifications
GOST 5627-87: Automatic wire nail machines. Parameters and dimensions. Norms of accuracy
GOST 5635-2018: Glass diffusers for ground vehicle lighting and light signalling apparatus. Specifications
GOST 5635-80: Glass dissipators for autotractor, motor-cycle and bicycle lighting and light signalling apparatus. Specifications
GOST 5688-2015: Tools with carbide tips. Specifications
GOST 621-87: Piston rings for internal combustion engines
GOST 6511-60: Wrought stannic-zinc bronze rods. Specifications
GOST 6688-2016: Brass bars of rectangular section. Specifications
GOST 6688-91: Brass bars of rectangular section. Specifications
GOST 713-88: Screw presses. Рarameters and dimensions, norms of accuracy
GOST 8.046-2010: State system for ensuring the uniformity of measurements. Optical dividing heads. Verification procedure
GOST 8.393-2010: State system for ensuring the uniformity of measurements. Optical Quadrants. Verification procedure
GOST 8.420-2002: State system for ensuring the uniformity of measurements. State verification schedule for means of measuring straightness and flatness deviation
GOST 8.490-83: State system for ensuring the uniformity of measurements. Instruments for measurements of gear interaxial distance. Methods of verification
GOST 8200-87: Hydraulic presses for plastic. Parameters and dimensions. Norms of accuracy
GOST 8592-79: Rotating electrical machines. Mounting and connecting dimensions. Tolerances and control methods
GOST 8894-2018: Glass pipes. Specifications
GOST 9161-85: Harness wire
GOST 9272-2017: Hollow glass blocks. Specifications
GOST 9272-81: Hollow glass blocks. Specifications
GOST 9284-75: Slides for micropreparations. Specifications
GOST 9416-83: Building levels. Technical requirements
GOST 9424-79: Hardened glasses for scuttles. Specifications
GOST 9753-88: Hydraulic gap presses. Parameters and dimensions. Norms of accuracy
GOST R 50650-94: Domestic siphons. Safety requirements and test methods
GOST R 50651-94: Gas cylinders for domestic siphons. Safety requirements and test methods
GOST R 50851-96: Stainless steel sinks. Specifications
GOST R 50962-96: Plastics vessels and articles for economic purposes. General specifications
GOST R 51083-2015: Wheelchairs for disabled persons. General specifications
GOST R 51083-97: Wheelchairs for disabled persons. General specifications
GOST R 51672-2000: Metrological ensuring of product testing for the assurance of conformity. General principles
GOST R 51760-2011: Polymeric consumer's containers. General specifications
GOST R 51969-2002: Kitchen utensils from special domestic glass. General specifications
GOST R 51970-2002: Ski-poles for walk and sport race skiing. Specifications
GOST R 52078-2003: Wood particle boards, laminated with paper impregnated with thermosetting resins
GOST R 52897-2007: Glass jars food products of fishing industry. Specifications
GOST R 52909-2008: Targets for stand shooting and sporting. General specifications
GOST R 53065.1-2008: Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature. Part 1. Test without packings
GOST R 53065.2-2008: Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature. Part 2. Test with packings
GOST R 53208-2008: Monostructural fibreboards. Specifications
GOST R 53784-2010: Optical elements for light signal devices of a railway transport. Specifications
GOST R 54154-2010: Sanitary ware made from metal for children and teenagers. Specifications
GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications
GOST R 56057-2014: LED light-optical systems for railway signal alarm. General technical requirements and test methods
GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure
GOST R 56674-2015: Casting of aluminium alloys and solid stamping of sheet aluminium cookware with non-stick coating. General specifications
GOST R 56674-2018: Casting cookware of aluminum alloys with non-stick coating. General specifications
GOST R 58317-2018: Weightlifting bars. Safety Requirements and Test Methods
GOST R 58319-2018: Weights are sports. Safety Requirements and Test Methods
GOST R 58514-2019: Building levels. Technical conditions
GOST R 58519-2019: Rules, graters and graters. Technical conditions
GOST R 58683-2019: Doors are ship internal fire-retardant type "B". General technical requirements
GOST R 8.677-2009: State system for ensuring the uniformity of measurements. Cylindrical thread gauges. Verification procedure
GOST R 8.874-2014: State system for ensuring the uniformity of measurements. Autocollimators. Verification Procedure
GOST R ISO 230-1-2010: Machine tools tests. Part 1. Measurement techniques of geometrics parameters
MI 1382-86: Guidelines. Protractor pendulum. Type ZURI-M. Method of verification
MI 1384-86: GSE. Caliper with a handout model 124. Calibration method
MI 1532-86: Guidelines. GSE. Levels frame and squared for mechanical engineering. Method of verification
MI 1673-87: State system for ensuring uniformity of measurements. Stakes and supports for gage heads. Methods of control
MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification
MI 1782-87: GSI. Calibration procedure
MI 1795-87: Patterns of travel control KSH gauge 1520 mm. Control method
MI 1799-87: Guidelines. Squares testing 90 degrees. Control method
MI 1812-87: Gages threaded tapered. Methods of control
MI 1848-88: Methods of verification. GSI: Folding metallic and wooden meters. Calibration procedure
MI 1937-88: Gauges for taper connections. Methods of control
MI 2007-89: State system for ensuring uniformity of measurements. Testing and marking plates. Method of verification
MI 2018-89: State system for ensuring uniformity of measurements. Micrometric depth gauges. Method of verification
MI 2024-89: State system for ensuring uniformity of measurements. Metal measuring rulers. Method of verification
MI 2029-89: Calibration and marking prisms with one prismatic recess and grip. Methods of control
MI 2031-89: Calibration and marking iron prisms. Methods of control
MI 2087-90: Recommendation. State system for ensuring uniformity of measurements. Micrometers desktop with a dial reading device. Method of verification
MI 2106-90: Setting rings for measuring the diameters of the holes
MI 2190-92: State system for ensuring uniformity of measurements. Shtangenreysmasy. Method of verification
MI 2191-92: Recommendation. State system for ensuring uniformity of measurements. Sinus rulers. Verification Method
MI 2196-92: Depth gauges
MI 390-87: Guidelines. GSE. Levels are electronic. Method of verification
MI 424-84: State system for ensuring uniformity of measurements. Shtangenreissmass arrow model BV-6226. Methods and means of verification
MI 516-84: Methodical instructions. Caliper of the traveling PShV type. Verification Method
MI 709-85: Methodical instructions. GSI. Model of height step-by-step with digital readout model BV-6151. Verification Method
MI 782-85: Guidelines. State system for ensuring uniformity of measurements. Micrometers with a division value of 0.01 mm. Method of verification
MP 203-5-2020: Werka depth gauges. Verification method
MP 203-9-2020: Squares testing 90 degrees of the Calibron trademark. Verification method
MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life
OST 13-86-80: Metrological support of furniture production. General requirements for calibration data base and instruments. Gauges monitoring.
OST 26.260.454-99: Spiral wound gasket. Types and dimensions. General specifications.
PR 32 TsSh 001-2001: Rules for metrology. Methodical instructions. Metrological support of control patterns for linear parameters of sorting slide retarders
R 3112199-0254-92: Time sheet of technological equipment for ATP of various capacities of TC and BTW
RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations
RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul
RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm
RD 34.45.614: Guide to Overhaul of Turbine Generators TVF-120-2 and TVF-100-2
RD 50-434-83: Guidelines. Autocollimators. Methods and means of verification
RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI
ST RK GOST R 50962-2008: Dishware and household products of plastic. General specification
ST TsKBA 067-2008: Pipe fittings. Spiral-wound heat-resistant gaskets for body-to-lid connections. Types, main dimensions and technical requirements
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
STB 1015-97: Cultural and general, and household products made of plastic. General specifications
STB 1517-2004: Plastic consumer packaging. General specifications
TU 102-339-83: Asbestos-cement three-layer partition walls on a wooden frame with mineral wool plates
TU 102-356-83: Three-layer roofing panels from steel corrugated profile and mineral wool insulation
TU 102-357-83: Three-layer steel wall panels with mineral wool insulation for block boxes and blocks
TU 102-358-83: Three-layer steel coating panels with mineral wool insulation for block boxes
TU 102-367-84: Three-layer steel partition walls with mineral wool
TU 13-427-78: An inclinometer. Technical conditions
TU 13-428-78: Altimeter. Technical conditions
TU 14-4-1731-92: Dowel-nails with zinc coated washers. Technical conditions
TU 16-525.609-85: Asynchronous motors AIS80 - AIS112, supplied for export. Technical conditions
TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair
TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs
TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair
TU 34-38-20365-94: Power valves. General technical conditions for major repairs
TU 34-38-20409-94: Pulse-safety devices Chekhov factory of power engineering. General technical conditions for major repairs
TU 67-564-83: Swing gate type of GRP. Technical conditions
TU 9462-001-84299122-2010: Ampoules medical colorless and brown from glass of the 1st hydrolytic class
Customers Who Viewed This Item Also Viewed:
 |
Special railway rolling stok. Dynamic and strength testing procedures
Language: English |
Blanks for marine shafts and rudder stocks. Specifications
Language: English |
Tempered glass. Specifications.
Language: English |
Glass with low emissivity hard coating. Specifications.
Language: English |
Glass laminated. Specifications.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.