GOST 12358-2002

ГОСТ 12358-2002

Alloyed and highalloyed steels. Methods for determination of arsenic

Стали легированные и высоколегированные. Методы определения мышьяка

Status: Effective

The standard establishes some basic statistical methods that are applied to ensure and maintain processes at an acceptable and stable level, while guaranteeing the conformity of products and services to the established requirements, and are used to improve process performance. including technological. The standard establishes a single formalized approach to statistical process control and does not limit the use of other statistical methods for specific processes. The standard establishes the basic concepts and elements of a statistical process control system, such as: a process control system; the effect of variability on the yield of the process; statistically controlled state; continuous improvement cycle; control cards and their application. The standard is intended for technical specialists and managers who apply in their activities statistical methods of process management in enterprises of various industries, including automotive.

Стандарт устанавливает непламенный атомно-абсорбционный (при массовой доле мышьяка от 0,0002 % до 0,01 %), фотометрический (при массовой доле мышьяка от 0,002 % до 0,2 %) и потенциометрический (при массовой доле мышьяка от 0,05 % до 0,2 %) методы определения мышьяка в легированных и высоколегированных сталях.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: Gosstandart of Russia, 9/11/2002

SKU: RUSS56559

Price: $90.09




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.1 Ferrous metals »

ISO classifier » 77 METALLURGY » 77.080 Ferrous metals » 77.080.20 Steel »

National standards » 77 METALLURGY » 77.080 Ferrous metals » 77.080.20 Steel »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V39 Test methods. Packaging. Marking »

National Standards for OKSTU » ORE RAW MATERIALS, NONMERAL, SECONDARY FERROUS METALLURGY AND COKE » Control methods (testing, analysis, measurements) »


As a Replacement Of:

GOST 12358-82: Steels alloyed and highalloyed. Methods for the determination of arsinic

The Document References:

GOST 10157-79: Gaseous and liquid argon. Specifications

GOST 11125-84: Super pure nitric acid. Specifications

GOST 12358-82: Steels alloyed and highalloyed. Methods for the determination of arsinic

GOST 14204-69: Instrument for separation of arsenic in steels, casts irons and alloys. Specifications

GOST 14261-77: Hydrochloric acid super pure. Specifications

GOST 14262-78: Super pure sulphuric acid. Specifications

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 19522-74: Ammonium Rodanist technical. Technical conditions

GOST 1973-77: Arsenous anhydride. Specifications

GOST 24147-80: Super pure ammonia aqueous solution. Specifications

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 3118-77: Reagents. Hydrochloric acid. Specifications

GOST 3760-79: Reagents. Ammonia water. Specifications.

GOST 3765-78: Reagents. Ammonium molibdate. Specifications

GOST 4160-74: Reagents. Potassium bromide. Specifications

GOST 4204-77: Reagents. Sulphuric acid. Specifications

GOST 4328-77: Reagents. Sodium hydroxide. Specifications

GOST 4457-74: Reagents. Potassium bromate. Specifications

GOST 4461-77: Reagents. Nitric acid. Specifications

GOST 5456-79: Reagents. Hydroxilamine hydrochloride. Specifications

GOST 5817-77: Reagents. Tartaric acid. Specifications

GOST 5841-74: Reagents. Hydrazine sulfate

GOST 5962-67: Rectified ethyl alcohol. Specifications

GOST 6552-80: Reagents. Orthophosphoric acid. Specifications

GOST 859-2001: Copper. Grades

GOST 9949-76: Coal xylene. Specifications

GOST R 51652-2000: Rectified ethyl alcohol of food raw material. Specifications

The Document is Referenced By:

GOST 10160-75: Magnetically soft precision alloys

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 11474-76: Bent-steel sections. Specifications

GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications

GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications

GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications

GOST 17066-94: Thin sheet rolled stock of high strength steel

GOST 18143-72: Corrosion resistant

GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades

GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications

GOST 19281-2014: High strength rolled steel. General specification

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 2246-70: Welding steel wire. Specifications

GOST 23270-89: Tube-billets for machining

GOST 23705-79: Hot-rolled and forged high-temperature alloy bars

GOST 25054-81: Forgings made of corrosion-resistant steels and alloys

GOST 26131-84: Heat-resisting steel forgings. General specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 2787-2019: Ferrous metals are secondary. General specifications

GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications

GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments

GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 33228-2015: Steel welded pipes for general purposes. Specifications

GOST 34468-2018: Pyatniki freight cars of 1520 mm gauge railways. General technical conditions

GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel

GOST 5058-65: Low-alloy constructional steel. Grades and general technical requirements

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5521-93: Shipbuilding rolled steel

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 800-78: Bearing tubes. Technical requirements

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST R 50.04.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for the steels and alloys melting and casting procedures

GOST R 50.05.17-2019: Conformity assessment system in the field of atomic energy use. Steel castings for equipment and pipelines of nuclear power plants. Control procedure

GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications

GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications

GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications

GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 56030-2014: Pipes for details of bearings. Technical specifications

GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.020.03-82: Stamped billets of turbine and compressor blades made of corrosion-resistant and heat-resistant steel. General Specifications. (2010 edition, including 3 amendments)

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 108.961.04-80: Castings of carbon and alloy steel, nickel-base alloys for components of stationary steam turbines and compressors. Specifications.

OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.

PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Steel structures
Language: English
Price: $297.00
Hot-rolled sheet. Range
Language: English
Price: $72.27
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Hexagon head bolts. Product grades A and B
Language: English
Price: $203.94

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!