GOST 17537-72
ГОСТ 17537-72
|
|
Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials
Материалы лакокрасочные. Методы определения массовой доли летучих и нелетучих, твердых и пленкообразующих веществ
Status: Partially canceled in the Russian Federation. Information on registration 511-st, 513-st dated 12/30/2005 (the official website of FSUE "Standartinform"); IUS 4-2006
The standard applies to paints, their semi-finished products, resins, etc. and establishes methods for determining the mass fraction of volatile and non-volatile, solid and film-forming substances.
Стандарт распространяется на лакокрасочные материалы, их полуфабрикаты, смолы и т.п. и устанавливает методы определения массовой доли летучих и нелетучих, твердых и пленкообразующих веществ.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
2/3/1972
SKU: RUSS56672
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L1 Inorganic chemical products »
L19 Test methods. Packaging. Marking »
National Standards for OKSTU »
PAINT MATERIALS, SEMI-PRODUCTS, FILM, PHOTO AND MAGNETIC MATERIALS AND HOUSEHOLD CHEMICALS »
Paints and varnishes »
As a Replacement Of:
GOST 6059-51: Paints and varnishes. Test methods. Determination of the amount of solid and film-forming in paints
GOST 6989-54: Paints and varnishes. Test methods. Determination of the amount of solvent and dry residue
The Document References:
GOST 12026-76: Filter paper for laboratory application
GOST 13345-85: Tin-plate and black plate
GOST 13726-97: Aluminium and aluminium alloys strips. Specifications
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 2768-84: Acetone technical. Specifications
GOST 28498-90: Liquid-in-glass thermometers
GOST 3134-78: White spirit
GOST 450-77: Calcium chloride technical. Technical conditions
GOST 8711-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2. Special requirements for ammeters and voltmeters
GOST 9980.2-86: Paint materials. Test sampling
The Document is Referenced By:
GOST 1003-73: Liquid naphthenic driers. Specifications
GOST 10144-74: Enamels ХV-124 and ХV-125. Specification
GOST 10144-89: Enamels XB-124Specifications
GOST 10277-90: Putties. Specifications
GOST 10503-71: Oil paints, ready for use. Specifications
GOST 10760-76: Electrical insulating varnish ВЛ-941. Specifications
GOST 10779-78: Polyvinyl alcohol. Specification
GOST 10982-75: Write enamel ЭП-148 for refrigerators and other electrodomestic devices. Specifications
GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications
GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications
GOST 12294-66: Electrical insulating impregnation varnish ФЛ-98. Specifications
GOST 12707-77: Wash primers. Specifications
GOST 1347-77: Varnish БТ-783. Specifications
GOST 14147-80: Varnish ФЛ-559. Specifications
GOST 14923-78: Enamels ПФ-223. Specifications
GOST 15030-78: Varnish KФ-965. Specifications
GOST 15081-78: Silico-organic thermostable varnish KO-08. Specifications
GOST 15865-70: Insulating varnish MЛ-92. Specifications
GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications
GOST 15943-80: Electrical insulating enamel ЭП-91. Specifications
GOST 16302-79: Primer ФЛ-086. Specifications
GOST 16508-70: Insulating silicon varnishes. Specifications
GOST 16763-79: Zink chromate. Specifications
GOST 18099-78: Enamels ML-152. Specifications
GOST 18172-80: Yellow iron oxide pigment
GOST 18335-83: Enamel НЦ-184. Specifications
GOST 19024-79: Enamels AC-182. Specifications
GOST 190-78: Drying oil
GOST 19214-80: Water dispersion paints for interior works. Specifications
GOST 20481-80: Enamels MЛ-1110. Specifications
GOST 20824-81: Varnish ЭП-730. Specifications
GOST 20833-75: Water-dispersion paints for exterior works. Specifications
GOST 20907-75: Liquid phenol formaldehyde resins. Specifications
GOST 21227-93: Enamels ПФ-218. Specifications
GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications
GOST 22369-77: Enamels ЭП-567. Specifications
GOST 22438-85: Enamels ЭП-525. Specifications
GOST 22564-77: Enamels KO-84 and KO-859. Specifications
GOST 23122-78: Enamels KO-811 and KO-811K. Specifications
GOST 23123-78: Silvery enamel KO-83. Specifications
GOST 23143-78: Enamels ЭП-773. Specifications
GOST 23143-83: Enamels ЭП-773. Specifications
GOST 23171-78: Enamel AK-512. Specifications
GOST 23343-78: Primer ГФ-0119. Specifications
GOST 23438-79: Varnishes of type ПЭ-232, ПЭ-250, ПЭ-250М, ПЭ-250ПМ. Specifications
GOST 2346-78: Enamel BT-123. Specification
GOST 23494-79: Primer XC-059, enamels XC-759, varnish XC-724. Specifications
GOST 23599-79: Enamels type ЭП-255 and ЭП-275. Specifications
GOST 23626-79: Emali HV-714. Tehnicheskie usloviya
GOST 23760-79: Enamels MЧ-145. Specifications
GOST 23832-79: Varnishes AK-113 and AK-113Ф. Specifications
GOST 24595-81: Primer B-MЛ-0143. Specifications
GOST 24709-81: Enamels ЭП-140. Specifications
GOST 24784-81: Enamels ПФ-188. Specifications
GOST 25129-82: Primer GF-031. Specifications
GOST 25287-82: Suspension for lubricating film formation BНИИ НП-209. Specifications
GOST 25366-82: Enamel ЭП-5116. Specifications
GOST 25515-82: Enamels НЦ-256. Specifications
GOST 25718-83: Primers AK-069 and AK-070. Specifications
GOST 28196-89: Water-dispersion paints
GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications
GOST 30066-96: Electro insulating film 'Lavaril-2N'. Specifications
GOST 30307-95: Building polymer glueing latex mastics. Specifications
GOST 30535-97: Polymeric adhesives. Nomenclature of indices
GOST 30884-2003: Ready-mixed oil paints. General specifications
GOST 31093-2003: Paints and varnishes for furniture. General specifications
GOST 312-79: Varnish БТ-5100. Specifications
GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works
GOST 32389-2013: Boiled oils. General specifications
GOST 32754-2014: General use highways. Colored Anti-skid surface. Test methods
GOST 32829-2014: Automobile roads of general use. Road marking materials. Methods of testing
GOST 33762-2016: Products and systems for the protection and repair of concrete structures. Requirements for injection-sealing compounds and seals of cracks, cavities and clefts
GOST 34277-2017: Materials and systems for the protection and repair of concrete structures. Requirements for anchoring compositions and adhesion-strength fastenings of reinforcement elements
GOST 3864-75: 22% Mastic. Specifications
GOST 478-80: Lead chromate pigments
GOST 482-77: Zink oxide oil paste. Specifications
GOST 4976-83: Furniture lacquers НЦ-218, НЦ-222, НЦ-243 and НЦ-223. Specifications
GOST 5406-84: Enamels НЦ-25. Specifications
GOST 5470-75: Lacquers of ПФ-283 and ГФ-166 types. Specifications
GOST 5631-79: Lacquer BT-577 and paint BT-177. Specifications
GOST 5971-78: Enamels for instruments. Specifications
GOST 6244-70: Electrical insulating impregnating varnishes БТ-987, БТ-988. Specifications
GOST 6465-76: Enamels PF-115. Specifications
GOST 64-77: Enamels ГФ-230 BЭ. Specifications
GOST 6586-77: Black paste (oil base) MA-015. Specifications
GOST 6631-74: Enamels НЦ-132. Specifications
GOST 6745-79: Enamel ГФ-1426. Specifications
GOST 6993-79: Enamels HV-1100. Specification
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 7462-73: Enamels НЦ-5123. Specifications
GOST 7930-73: Enamels НЦ-1125. Specifications
GOST 8017-74: Lacquer БT-99. Specifications
GOST 8018-70: Electrical insulating impregnating varnish ГФ-95. Specifications
GOST 8292-85: Oil and paste color paints
GOST 8784-75: Paint materials. Methods for determination of hiding power
GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods
GOST 9.406-84: Unified system of corrosion and ageing protection. Organic-silicate coatings. Technical requirements and methods of tests
GOST 901-78: Bakelite lacquers. Specifications
GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications
GOST 9151-75: Enamels of types ГФ-92. Specifications
GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications
GOST 926-82: Enamels ПФ-133. Specifications
GOST 9355-81: Primer HS-010. Enamel HS-710. Lacquer HS-76. Specification
GOST 9640-75: Enamels ЭП-51
GOST 9640-85: Enamels ЭП-51. Specifications
GOST 9754-76: Enamels MЛ-12 type. Specifications
GOST R 50535-93: Paints and varnishes. Methods for the determination of volume of non-volatile matters
GOST R 51691-2000: Paint materials. Enamels. General specifications
GOST R 51692-2000: Boiled oils. General specifications
GOST R 51693-2000: Anticorrosion primers. General specifications
GOST R 52020-2003: Water dispersible paint materials. General specifications
GOST R 52165-2003: Paint materials. Varnishes. General specifications
GOST R 52491-2005: Coating materials, used in building. General specifications
GOST R 52576-2006: General use highways. Road marking materials. Test methods
GOST R 55818-2013: Polymer base decorative coats for facade’s thermal insulation composite systems with external mortar's lays. Specifications
GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures
GOST R 70572-2022: Polyurethane adhesives for load-bearing wooden structures. Specifications
MRTU 38-5-880-66: Glue 88-N
RD 153-34.1-40.504-00: Procedural Guidelines for Optimal Corrosion Protection of Storage Tanks and Protection of the Water in Them Against Aeration
RSN 40-81: Instructions for use of organosilicate compositions for corrosion protection of metal and other building structures, process equipment and decoration finishes of the building materials and facades of buildings
STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions
TR 149-03: Technical recommendations on the technology of using the complex of specialized finishing materials for the renovation of external and internal surfaces during reconstruction and major repairs of buildings
TR 84-98: Technical recommendations for the application of finishing systems of paints and varnishes on exterior wall panels that are molded "face down"
TR 85-98: Technical recommendations on input quality control of materials used for facade finishing
TR 89-99: Technical recommendations for the manufacture and use of building paints and varnishes from the Inteko system for factory and construction conditions
TR 94.11-05: Technological regulation of the operational quality control of construction, installation and special works during the construction of buildings and structures. 11. Painting and wallpaper production
TU 21-29-2-68: Kumarono-rubber KN-3 mastic
TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions
TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions
TU 38 105170-70: Glue WRC-15
TU 38 105236-71: Glue 4NBuv
TU 38 105517-72: Adhesive for the automotive industry
TU 38-10558-70: Glue KM-51
TU 38-5-390-69: Glue SV-2a
TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines
TU 6 LatvSSR 09-70: Glue for staples to staples
TU 6-02-862-74: MFSN-B stabilizer
TU 6-10-1052-75: Enamel VL-515 red-brown
TU 6-10-1117-85: Primer EP-057 Protector
TU 6-10-1270-87: Varnish BT-5101
TU 6-10-1293-72: Nitroclay AK-20
TU 6-10-1539-76: EP-572 Enamel of various colors
TU 6-10-778-76: Enamel FL-412 (former FL-723) FL-61 (former FL-724) silver
TU 6-10-866-85: Lucky VL-725, VL-725 G and enamel VL-725 aluminum
TU 82-65: Adhesive for Religion
VSN 65-97: Guidelines for Use of Water-Dispersed Cements and Adhesives in Finishing Work
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.