GOST 20403-75
ГОСТ 20403-75
|
|
Rubber. Method for determination hardness in international units (30 to 100 IRHD)
Резина. Метод определения твердости в международных единицах (от 30 до 100 IRHD)
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard establishes a method for determining the hardness of rubber from 30 to 100 international units of IRHD. The essence of the method consists in measuring the difference between the depth of immersion of the indenter into the sample under the action of preliminary and total loads. Depending on the sample size, the tests are carried out on a hardness meter or a microhardness tester.
Стандарт устанавливает метод определения твердости резин от 30 до 100 международных единиц IRHD. Сущность метода заключается в измерении разности между глубиной погружения индентора в образец под действием предварительной и общей нагрузок. В зависимости от размера образцов испытания проводят на твердомере или микротвердомер
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
1/6/1975
SKU: RUSS56722
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
019/2011 TR CU. On safety of personal protective equipment »
Regulations and standards (to ТР ТС 019/2011) »
Standards for pipe fittings (TPA) »
9. Materials for piping valves (TPA) »
9.3 Rubber »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.1 Rubber products »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.060 Rubber »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.060 Rubber »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L6 Rubber and asbestos products »
L69 Test methods. Packaging. Marking »
National Standards for OKSTU »
RUBBER AND ASBESTOS PRODUCTS »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 13331-67: Rubber. Method for determining hardness in international units
GOST 253-53: Determination of the hardness of rubber with hardness tester TShM-2
The Document References:
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 269-66: Rubber. General requirements for the physical mechanical tests
GOST 28498-90: Liquid-in-glass thermometers
The Document is Referenced By:
Decision 30: On approval of the list of products in respect of which the customs declaration is accompanied by a document about the conformity assessment requirements of the technical regulations of the Customs Union "On safety of agricultural and forestry tractors and trailers to them" (TR TS 031/2012) (as amended on March 21, 2017)
Decision 30: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, resulting in voluntary compliance with the requirements of technical regulations of the Customs Union "On Personal Protective Equipment Safety" (TR CU 019/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including
GOST 10778-83: Spatulos. Specifications
GOST 11529-2016: Polyvinylchloride materials for floors. Control methods
GOST 11529-86: PVC materials for floors. Methods of control
GOST 11679.1-2018: Rubber-metal instrument shock-absorbers. Specifications
GOST 11679.1-76: Rubber-metal shock-absorbers for instruments. Specifications
GOST 12855-77: Rubber sheet for transformers. Specifications
GOST 14680-79: Synthetic heat-resistant rubber SKT. Specification
GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
GOST 17053.1-80: Ship shock absorbers AKCC-M. Specifications
GOST 18408-73: Wood. Methods for evaluation of electrical resistances at d.c. voltages
GOST 18829-2017: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications
GOST 18829-73: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications
GOST 19478-74: Polyvinyl chloride plasticate for telephone cord insulation and shell. Specifications
GOST 21218-75: Rubber spheres dividing for pipelines. Specifications
GOST 24621-2015: Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST 24621-91: Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST 24622-91: Plastics. Determination of hardness. Rockwell hardness
GOST 25645.331-91: Polymeric materials. Requirements for radiation resistance estimation
GOST 27180-2019: Ceramic tiles. Test methods
GOST 27570.47-96: Safety of household and similar electrical appliances. Particular requirements for dishwashers and test methods
GOST 29016-91: Vitreous and porcelain enamels. Apparatus for testing with acid and neutral liquids and their vapours
GOST 29019-91: Vitreous and porcelain enamels. Apparatus for determination of resistance to hot detergent solutions used for washing textiles
GOST 29182-91: Rubber footwear. Lined or unlined rubber industrial boots with chemical resistance
GOST 30345.4-95: Safety of household and similar electrical appliances. Particular requirements for washing machines
GOST 30345.5-96: Safety of household and similar electrical appliances. Particular requirements for spin extractors
GOST 30698-2000: Glass tempered for building. Specifications
GOST 30698-2014: Tempered glass. Specifications.
GOST 30826-2001: Laminated glass for building. Specifications
GOST 30826-2014: Glass laminated. Specifications.
GOST 30852.0-2002: Explosionproof electrical apparatus. Part 0. General requirements
GOST 30852.1-2002: Explosionproof electrical equipment. Part 1. Flameproof enclusure type explosion protection
GOST 31610.0-2012: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST 32018-2012: Road-construction goods of natural stone. Specifications
GOST 32020-2012: Elastomeric bearings for bridge building. Specifications
GOST 32280-2013: Glass and glass products. Methods for determination of mechanical properties. Determination of resistance to static load
GOST 32281.2-2013: Glass and glass products. Determination of the bending strength. Coaxial double ring test on flat specimens with large test surface areas
GOST 32281.3-2013: Glass and glass products. Determination of the bending strength. Test with specimen supported at two points (four points bending)
GOST 32281.5-2013: Glass and glass products. Determination of the bending strength. Coaxial double ring test on flat specimens with small test surface areas
GOST 32564.1-2013: Glass and glass products. Test method for resistance to ball drop
GOST 32564.2-2013: Glass and glass products. Test method for resistance to impact of hammer and axe
GOST 32566-2013: Glass and glass products. Test method of bullet resistance
GOST 32586-2013: Vibroinsulators rubber and rubber-reinforced for automotive technic. Specifications
GOST 33087-2014: Heat strengthened glass. Specifications
GOST 33559-2015: Glass and glass products. Test method for resistance to soft body
GOST 33724.1-2016: Pneumatic brake equipment of the railway rolling stock. Safety Requirements and Inspection Procedures. Part 1. Air distributors, brake valves, brake units, sealing rubber components
GOST 34341-2017: Automobile engines. Belts. Technical requirements and test methods
GOST 4671-76: Rubber and rubberized metal components for the bottom hole hydraulic engine bearings. Specifications
GOST 5228-76: Rubber o-rings for the couplings of asbestos-cement pipes. Specification
GOST 5228-89: Rubber o-rings for the couplings of asbestos-cement pipes
GOST 5496-78: Rubber technical tubes. Specifications
GOST 6433.2-71: Solid electrical insulating materials. Methods for evaluation of electrical resistance at d. c. voltages
GOST 6467-79: Vulcanized rubber cords of round and square cross-sections. Specifications
GOST 6557-89: Rubber rings for connection fitting. Specifications
GOST 6980-76: Accumulator ebonite monoblocks for autocars, autobuses and tractors. Specifications
GOST 7199-77: Rubber-metallic ship bearings. Specifications
GOST 7338-90: Rubber and rubber-fabric sheets. Specifications
GOST 7912-74: Rubber. The method for the determination of brittle temperature
GOST 9.061-75: Unified system of corrosion and ageing protection Rubbers. Accelerated test method for resistance to attack by liquid corrosive media during rotation under frictional condition
GOST 9.066-76: Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of ageing resistance testing under weather conditions
GOST 9.701-79: Unified system of corrosion and ageing protection. Vulcanized rubbers. Test method for radiation ageing resistance
GOST EN 12600-2015: Glass and glass products. Test method for resistance to impact dual-tyres
GOST EN 13541-2013: Glass and glass products. Explosion resistance test method
GOST ISO 16010-2013: Elastomeric seals. Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
GOST ISO 16932-2014: Glass and glass items. Safety glass, resistant to the effects of storms. Method of testing and classification
GOST ISO 188-2013: Vulcanized rubber and thermoplastics. Accelerated ageing and heat resistance tests
GOST ISO 4635-2013: Preformed rubber joint seals for use between concrete paving sections of highways. Technical requirements
GOST ISO 6446-2016: Rubber products. Supporting parts of the span structure of the bridge. Technical requirements for rubber
GOST R 51186-98: Alarm sonic passive glass break detectors for use in buildings. General technical requirements and methods of tests
GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements
GOST R 51330.1-99: Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus
GOST R 51374-99: Safety of household and similar electrical appliances. Particular requirements for commercial electric dishwashing machines
GOST R 52161.2.4-2003: Household and similar electrical appliances. Safety. Part 2-4. Particular requirements for spin extractors
GOST R 52161.2.7-2005: Safety of household and similar electrical appliances. Part 2.7. Particular requirements for washing machines
GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST R 53265-2019: Fire fighting equipment. Personal protective equipment for firefighter legs. General technical requirements. Test methods
GOST R 53820-2010: Motor vehicles. Details of sealing and protective. Technical requirements and test methods
GOST R 53821-2010: Vehicles. Diaphragms and plate membranes. Technical requirements and test methods
GOST R 53841-2010: Automobile engines. Drive belts. Technical requirements and test methods
GOST R 53906-2010: Toys. General safety requirements and methods of tests. Mechanical and physical properties
GOST R 54162-2010: Tempered glass. Specifications
GOST R 54171-2010: Laminated glass. Specifications
GOST R 54180-2010: Heat strengthened glass. Specifications
GOST R 55039-2012: Ophthalmic optics. Uncut finished spectacle lenses. Specifications for transmittance and anti-reflective coatings. Test methods
GOST R 55529-2013: Sports facilities. Safety requirements for carrying out sports and physical cultural activities. Test methods
GOST R 55877-2013: Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for determination of resistance to wear by abrasive wheels
GOST R 56094-2014: Ophthalmic optics. Uncut finished spectacle lenses. Part 5. Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant. Test methods
GOST R 58725-2019: Covers sports rubber rolled. Technical specifications
GOST R 58726-2019: Polymer and rubber tile coatings. Technical specifications
GOST R ISO 12046-2017: Synchronous drive belts for automobiles. Determination of physical properties
GOST R ISO 16932-2011: Glass and glass products. Destructive-windstorm-resistant security glazing. Test method and classification
GOST R ISO 1817-2009: Rubber. Determination of resistance to liquids effect
GOST R ISO 6806-2017: Rubber hoses and hose assemblies for oil burners. Technical requirement
GOST R ISO 7619-1-2009: Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method of measurement (Shore hardness)
GOST R ISO 7619-2-2009: Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 2. IRHD pocket meter method of measurement
GOST R ISO 9211-4-2016: Optics and optical instruments. Optical coatings. Part 4. Specific test methods
ODM 218.2.002-2008: Recommendations for the design and installation of polymer bridge bearing parts
OST 24.070.01-86: Products of mining machinery. General technical requirements.
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
SP 426.1325800.2018: Structures front translucent buildings and structures. Design rules
TU 2531-002-53597015-01: Face seal (rubber cuff) to protect the annular space at the junctions of main pipelines under roads and railways
TU 38 0051166-98: Rubber compounds for the rubber products of aircraft
TU 38-105116-81: Rubber plate for sealing gaskets of vacuum systems
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Dependability in technics. Dependability management. Analysis techniques for reliability. General principles
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.