GOST 25670-83

ГОСТ 25670-83

Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication

Основные нормы взаимозаменяемости. Предельные отклонения размеров с неуказанными допусками

Status: Not effective - Superseded

The standard applies to smooth elements of metal parts of machines and devices, machined and sets the maximum deviations of dimensions.

Стандарт распространяется на гладкие элементы металлических деталей машин и приборов, обработанные резанием и устанавливает предельные отклонения размеров.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 20

Approved: Gosstandart of the USSR, 3/14/1983

SKU: RUSS56836

Price: $158.00




The Product is Contained in the Following Classifiers:

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.10 Tolerances and landings »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.10 Tolerances and landings »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.020 Characterization and design of mechanisms, instruments and equipment »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.020 Characterization and design of mechanisms, instruments and equipment »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G12 Tolerances and fits »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Tolerances and landings. Surface cleanliness »


The Document is Replaced With:

GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications

The Document References:

GOST 25069-81: Basic norms of interchangeability. Unindicted tolerances of form and surface location

GOST 25346-82: Unified system of tolerances and seating fits. General provisions, series of tolerances and major deviations

GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations

GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

GOST 25348-82: Basic norms of interchangeability. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm

GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances

The Document is Referenced By:

GOST 10677-2001: Rear three point linkage system for agricultural tractors with nominal traction force from 0,6-8. Types, basic parameters and dimensions

GOST 10677-82: Rear three point linkage system for agricultural tractors with nominal traction force from 0,6-8. Types, basis parameters and dimensions

GOST 1142-90: Horse-driven load carriages. Specifications

GOST 11442-90: General-purpose axial fans

GOST 11823-91: Check valves for stipulated pressure of pn < 25 MPa (250 kgf/sm2)

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12893-83: Single-seated, double-seated and cage control valves.

GOST 13.1.508-82: Microfilming. Reels. General technical requirements

GOST 13252-91: Swing check valves for Pnom £25 MPa (250 kgf/cm2). General specifications

GOST 13547-79: Butterfly valves for pnom up to 2.5 MPa (25 kgf/cm2)

GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications

GOST 13877-96: Sucker rods and sucker rod couplings. Specifications

GOST 13944-86: Retaining spring flat rings and grooves for them. Specifications

GOST 14019-80: Metals. Methods of bend tests

GOST 14896-84: Rubber u-packing seals for hydraulic devices

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 15876-90: Gauges for products made from wood and wooden materials

GOST 16324-83: Cast iron diaphragm control valves with pneumatic diaphragm actuator

GOST 17327-95: Bread baking forms

GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation

GOST 18176-79: Furniture of packing cases. Specifications

GOST 19125-90: Fittings of connections for airborne instruments. Design and dimensions

GOST 19584-80: Units and replaceable parts of universal re-adjustable hammer dies for precision die forging by means of crank presses

GOST 2.307-68: Unified system for design documentation. Drawing of dimensions and limit deviations

GOST 20680-86: Vertical apparatuses with mechanical mixers

GOST 21345-2005: Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications

GOST 21345-78: Conical, ball and cylindrical cocks set at рnom of up to approx. 16 MPa ( 160 kgf/cm2)

GOST 21546-88: Hammer dies for die forging

GOST 22390-77: Automobile body-boxes. Fixture parts and circuits for cluster spacing of entrenching tools. Technical requirements

GOST 22472-87: Dies for a sheet-metal stamping

GOST 23354-78: Threaded pipeline connections. Cut ring. Construction

GOST 23355-78: Threaded pipeline connections. Ball nipple. Construction

GOST 23356-78: Threaded pipeline connections. Pressing rings. Construction

GOST 23359-78: Threaded pipeline connections. Reinforced bushings. Construction

GOST 24258-88: Different types of scaffolding. General specifications

GOST 24259-80: Assembling equipment for temporary fastening and adjusting structural members of building. Classification and general technical requirements

GOST 24511-80: Block of cassette removable press-moulds for rubber-technical articles. Construction and dimensions

GOST 24513-80: Press-moulds for manufacturing of rubber O-rings section. Executive dimensions of formed articles

GOST 24514-80: Packets quick-changing with conical break of press-moulds for manufacturing of rubber O-rings section. Construction and dimensions

GOST 24515-80: Packets quick-changing with horizontal break of press-moulds for manufacturing of rubber O-rings section with inner diameter from 2,8 up to 9,7 mm. Construction and dimensions

GOST 24516-80: Packets quick-changing with horizontal break of press-moulds for manufacturing of rubber O-rings section. Construction and dimensions

GOST 24517-80: Bushes guiding quick-changing of press-moulds for manufacturing of rubber technical articles. Construction and dimensions

GOST 24518-80: Columns guiding quick-changing of press-moulds for manufacturing of rubber-technical articles. Construction and dimensions

GOST 25032-81: Different types of crampons. Classification and general technical requirements

GOST 25247-82: Pushbutton switches and indicating lights low voltage. Overall and fixing dimensions

GOST 26405-84: Tools for manufacturing bolts and nuts using cold heading machines

GOST 27713-88: Foundry equipment. Machines for casting in chill moulds. Mounting dimensions for chill fixing

GOST 27962-88: Industrial equipment

GOST 28091-89: Industrial burners for liquid fuel. Test methods

GOST 28121-89: Akins classifiers

GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications

GOST 31851-2012: Industrial gas-using equipment. Air heaters. Test methods

GOST 3480-76: Power take-off for agricultural tractors and power input connection for agricultural machines. Types and main parameters

GOST 5006-83: Toothed clutches. Specifications

GOST 5105-82: Steel fuel and oil tanks

GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications

GOST 5761-74: Valves for nominal pressure

GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications

GOST 5762-74: Pipeline industrial valves. Gate valves PN £ 250. General specifications

GOST 5976-90: Centrifugal fans for general use

GOST 6449.5-82: Products of wood and wooden materials. Non-specified limiting deviations and tolerances

GOST 766-74: Anchors. General specifications

GOST 8.549-86: The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensions to 500 mm with non-specified tolerances

GOST 9066-75: Studs for flanged connections with medium temperature 0 °C to 650 °C. Types and main dimensions

GOST 9570-84: Box and post pallets

GOST R 50497-93: Textile machinery and accessories. Flat steel heddles for general use. Dimensions

GOST R 50894-96: Star elastic clutches. Specifications

GOST R 50942-96: Industrial gas-using equipment. Air heaters. Test methods

GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications

GOST R 51161-98: Glass reinforced plastic sucker rods. Specifications

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51614-2000: Rear three-point linkage systems for agricultural tractors of traction class 0,2. Basic parameters and dimensions

OST 13-158-83: Wooden returnable and reusable furniture container. Technical specifications.

OST 24.070.01-86: Products of mining machinery. General technical requirements.

OST 34-10-418-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Knuckled branches. Construction and dimensions.

OST 34-10-419-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Welded branches. Construction and dimensions.

OST 34-10-420-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Curved branches. Construction and dimensions.

OST 34-10-421-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Steeply curved pipes. Construction and dimensions.

OST 34-10-422-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Seamless transits. Construction and dimensions.

OST 34-10-423-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Turned transits. Construction and dimensions.

OST 34-10-424-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Welded sheet transitions. Construction and dimensions.

OST 34-10-426-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flat welded flanges to webbings. Construction and dimensions.

OST 34-10-431-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Bottom spacing rings. Construction and dimensions.

OST 34-10-432-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Internal flush-jointed drilled tees. Construction and dimensions.

OST 34-10-433-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Transitional tees with a reinforced fitting. Construction and dimensions.

OST 34-10-439-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Fitting. Construction and dimensions.

OST 36-141-87: free metal Flange for plastic pipes for Pnom. to 1.0 MPa. Specifications.

OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.

RD 26-16-40-89: Flange of previously designed wellhead equipment. Main dimensions.

RD 36-62-00: Hoisting equipment. General technical requirements.

RST RSFSR 161-88: Cooper products. General technical conditions

RST RSFSR 45-86: Sledge for children. Technical conditions

RST RSFSR 516-88: Eaves metal. Technical conditions

TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type

TU 25.12.30-77: Inserts cut from emerald grown for jewelry. Technical conditions

TU 3742-001-96231033-2006: Swing check valve type 19s38nzh and 19s73nzh. Technical conditions

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!