Rubber and glue. Methods for determination of metal bond strength at separation
Резина и клей. Методы определения прочности связи с металлом при отслаивании
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard applies to rubber, glue and establishes methods for determining the strength of their connection with the metal during peeling (A, B and C). The essence of the methods lies in the measurement of the force causing the peeling of the rubber strip from the metal plate. When peeling by method A, the force acts perpendicular to the plane of the plate, and according to methods B and C is parallel to the plane of the plate. Methods A and B are designed to determine the bond strength when attaching rubber mixtures to a metal during vulcanization. Method B is designed to determine the bond strength when attaching vulcanized rubbers to metal.
Стандарт распространяется на резину, клей и устанавливает методы определения прочности связи их с металлом при отслаивании (А, Б и В). Сущность методов заключается в измерении силы, вызывающей отслаивание резиновой полоски от металлической пластины. При отслаивании по методу А сила действует перпендикулярно к плоскости пластины, по методам Б и В - параллельно плоскости пластины. Методы А и В предназначены для определения прочности связи при креплении резиновых смесей к металлу в процессе вулканизации. Метод Б предназначен для определения прочности связи при креплении вулканизованных резин к металлу.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
7/8/1977
SKU: RUSS57101
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.1 Rubber products »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.060 Rubber »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.060 Rubber »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L6 Rubber and asbestos products »
L69 Test methods. Packaging. Marking »
National Standards for OKSTU »
RUBBER AND ASBESTOS PRODUCTS »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 411-69: Rubber. Methods for determination of metal bond strength at separation
The Document References:
GOST 28840-90: Machines for tension, compression and bending tests of materials
The Document is Referenced By:
GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications
GOST 9.068-76: Unified system of corrosion and ageing protection. Sealants. Test methods for resistance to attack by liquid corrosive media
GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST 9.712-86: Unified system of corrosion and ageing protection. Adhesives. Test methods of adhesive bonds of rubber with rubber-fabric materials and metals for resistance to the influence of liquid aggressive media
GOST R 51164-98: Steel pipe mains. General requirements for corrosion protection
GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications
GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications
SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines
SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work
TU 1390-004-86695843-2010: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anticorrosive polyethylene coating for the construction of trunk pipelines
TU 1390-007-86695843-2010: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anti-corrosion polyethylene coating for the construction of field and main oil pipelines
TU 14-3R-67-2003: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anti-corrosion polyethylene coating for the construction of trunk pipelines. Technical conditions
TU 2513-001-00152081-93: Glues 51-K-10V. Technical specifications
TU 5764-011-01297858-99: Steel pipes with thermal insulation from polyurethane foam. Technical conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
