Zink oxide oil paste. Specifications
Белила цинковые густотертые. Технические условия
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard applies to densely grated zinc white, which is a thick, viscous mass consisting of dry zinc oxide or their mixture with a filler wiped on vegetable oil with the introduction of desiccant or natural drying oil.
Стандарт распространяется на густотертые цинковые белила, представляющие собой густую вязкую массу, состоящую из сухих цинковых белил или их смеси с наполнителем, затертых на растительном масле с введением сиккатива или на натуральной олифе.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
9/16/1977
SKU: RUSS57115
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
87 Paint and varnish industry »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L1 Inorganic chemical products »
L18 Pigments and paints »
National Standards for OKSTU »
PAINT MATERIALS, SEMI-PRODUCTS, FILM, PHOTO AND MAGNETIC MATERIALS AND HOUSEHOLD CHEMICALS »
White pigments (dry) »
As a Replacement Of:
GOST 482-67: Zink oxide oil paste
The Document References:
GOST 10398-76: Reagents and super pure substances. Complexonometric method for determination of basic matter content
GOST 10652-73: Reagents. Dihydrate ethylenediaminetetraacetic acid disodium salt. Specifications
GOST 12.3.005-75: Painting works
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 13345-85: Tin-plate and black plate
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 190-78: Drying oil
GOST 19433-88: Dangerous goods. Classification and marking
GOST 2768-84: Acetone technical. Specifications
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 3760-79: Reagents. Ammonia water. Specifications.
GOST 3773-72: Reagents. Ammonium chloride. Specifications
GOST 4381-87: Lever-type micrometers. General specifications
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 6589-74: Paintwork materials. Method for determination of grind degree by grindmeter 'Klin'
GOST 6613-86: Square meshed woven wire gauzes
GOST 6709-72: Distilled water. Specifications
GOST 7931-76: Natural drying oil
GOST 8784-75: Paint materials. Methods for determination of hiding power
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9980.1-86: Paint materials. Rules of acceptance
GOST 9980.2-86: Paint materials. Test sampling
GOST 9980.3-86: Paint materials. Packing
GOST 9980.4-2002: Paint materials. Marking
GOST 9980.5-2009: Paint materials. Transportation and storage
GOST 9980.5-86: Paint materials. Transportation and storage
The Document is Referenced By:
GOST 16549-2019: Cast iron plug-through cranes, coupling cast iron, for nominal pressure PN? 1.0 MPa (10 kgf / cm2) with a plug for draining water
GOST 5375-79: Rubber moulded boots. Specifications
GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
NPB 158-97*: Special protective shoes for firefighters. General technical requirements and test methods
OST 92-1586-89: Marking paints. General requirements for selection, preparation and laying.
POT R M-017-2001: Inter-Industry Occupational Safety and Health Regulations for Painting Operations
TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications
TU 102-425-86: A set of structures for the building of crane (crane) with structures frame production span of 12 and 18M
TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m
TU 36-2009-77: Steel structures of steel vertical cylindrical tanks with a capacity from 100 to 20,000 m3 for the storage of oil and oil products. Technical conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.