imgalt

GOST 7462-73

ГОСТ 7462-73

Enamels НЦ-5123. Specifications

Эмали НЦ-5123. Технические условия

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03.03.93 (IUS 5-6-1993)

The standard applies to the enamel NC-5123, which is a suspension of pigments in a solution of colloxylin and resin in a mixture of volatile organic solvents with the addition of plasticizers. Designed for painting raw surfaces of cast, in contact with the lubricating parts of car engines, tractors and agricultural machinery. Enamels are applied by pneumatic spraying or glazing.

Стандарт распространяется на эмали НЦ-5123, представляющие собой суспензию пигментов в растворе коллоксилина и смолы в смеси летучих органических растворителей с добавлением пластификаторов. Предназначены для окраски необработанных поверхностей литых, соприкасающихся смаслом деталей двигателей автомобилей, тракторов и сельскохозяйственных машин. Эмали наносятся методами пневматического распыления илиокунания.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 1/8/1973

SKU: RUSS57176

Price: $201.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.3 Products of paint and varnish industry »

ISO classifier » 87 PAINT AND VARNISHING INDUSTRY » 87.040 Paints and varnishes »

National standards » 87 PAINT AND VARNISHING INDUSTRY » 87.040 Paints and varnishes »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L2 Organic Chemical Products » L24 Varnish and enamel »

National Standards for OKSTU » PAINT MATERIALS, SEMI-PRODUCTS, FILM, PHOTO AND MAGNETIC MATERIALS AND HOUSEHOLD CHEMICALS » Varnishes, enamels, primers and fillers based on cellulose ethers »


As a Replacement Of:

GOST 7462-55: Nitro enamels for engines, cars and tractors

The Document References:

GOST 10054-82: Water-resistant abrasive paper

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.3.005-75: Painting works

GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 13345-85: Tin-plate and black plate

GOST 14192-77: Marking of cargoes

GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes

GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises

GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials

GOST 18188-72: Solvents of grades 645, 646, 647, 648 for paint materials. Specifications

GOST 19007-73: Paintwork materials. Method for determination of drying time and degree

GOST 19433-88: Dangerous goods. Classification and marking

GOST 23343-78: Primer ГФ-0119. Specifications

GOST 25129-82: Primer GF-031. Specifications

GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument

GOST 6589-74: Paintwork materials. Method for determination of grind degree by grindmeter 'Klin'

GOST 6613-86: Square meshed woven wire gauzes

GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending

GOST 7462-73: Enamels НЦ-5123. Specifications

GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity

GOST 8784-75: Paint materials. Methods for determination of hiding power

GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing

GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect

GOST 9980.1-86: Paint materials. Rules of acceptance

GOST 9980.2-86: Paint materials. Test sampling

GOST 9980.3-86: Paint materials. Packing

GOST 9980.4-86: Paint materials. Marking

GOST 9980.5-86: Paint materials. Transportation and storage

The Document is Referenced By:

GOST 13218.11-80: Rolling bearings pillow blocks. Technical requirements

GOST 13219.17-81: Cups for ball bearings of pillow blocks. Technical requirements

GOST 13354-91: Gated wooden patterns. Specifications

GOST 15035-80: Underground scraper winches

GOST 23106-78: Longitudinal screw cap couplings. Basic parameters. Design and dimensions

GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties

GOST 24246-80: Box clutches. Basic parameters. Design and dimensions

GOST 24246-96: Box clutches. Parameters, design and dimensions

GOST 2593-2009: Coupling air brake hoses for railway rolling stock. Specifications

GOST 2593-2014: Hose connections for railway rolling stock. Specifications.

GOST 31374-2009: Connection brake pipe with electrocontact 369A. Specifications

GOST 31402-2009: Brake cylinders for railway rolling stock. General specifications

GOST 4626-79: Equipment for horizontal tanks for petroleum products. Valve inlet. Specification

GOST 5147-80: Joint clutches. Basic parameters. Design and dimensions

GOST 7462-73: Enamels НЦ-5123. Specifications

GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing

GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors

GOST 9.401-89: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with tropical climate. General requirements and methods of accelerated testing

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST R 52392-2005: Brake cylinders for railway rolling stock. General specifications

GOST R 55727-2013: Mining equipment. Mine loading cars. General technical requirements and test methods

ONTP 02-94: Sectoral norms of technological design of enterprises in the automotive industry. Woodworking shops (sites)

OST 108.033.01-86: mechanical stokers. Technical conditions.

RD 102-002-88: Machines, tools and equipment for pipeline construction. Designing and manufacturing.

RD 36-62-00: Hoisting equipment. General technical requirements.

TU 36-2199-79: Lifting equipment. Overhaul

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English
Price: $134.00
imgalt
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English
Price: $606.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!