GOST 9498-79
ГОСТ 9498-79
|
|
Flat ingots of aluminium and wrought aluminium alloys for rolling. Specifications
Слитки из алюминия и алюминиевых деформируемых сплавов плоские для проката. Технические условия
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard applies to flat ingots, cast from aluminum and aluminum wrought alloys by semi-continuous or continuous casting, and intended for rolling sheets, tapes and other semi-finished products.
Стандарт распространяется на плоские слитки,отлитые из алюминия и алюминиевых деформируемых сплавов методом полунепрерывного или непрерывного литья и предназначенные для прокаткина листы, ленты и другие полуфабрикаты.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
10/11/1979
SKU: RUSS57241
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.3 Non-ferrous and precious metals »
ISO classifier »
77 METALLURGY »
77.120 Non-ferrous metals »
77.120.10 Aluminum and aluminum alloys »
National standards »
77 METALLURGY »
77.120 Non-ferrous metals »
77.120.10 Aluminum and aluminum alloys »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V5 Non-ferrous metals and their alloys. Rolled non-ferrous metals »
V51 Non-ferrous metals, including rare, and their alloys »
The Document is Replaced With:
GOST 9498-2019: Flat bars of aluminum and aluminum wrought alloys for hire. Technical specifications
As a Replacement Of:
GOST 9498-71: Aluminum flat bars for rolling
The Document References:
GOST 11069-2001: Primary aluminium. Grades
GOST 11069-74: Primary aluminium. Grades
GOST 11739.11-98: Aluminium casting and wrought alloys. Methods for determination of magnesium
GOST 11739.12-98: Aluminium casting and wrought alloys. Methods for determination of manganese
GOST 11739.13-98: Aluminium casting and wrought alloys. Methods for determination of copper
GOST 11739.15-99: Aluminium casting and wrought alloys. Methods for determination of sodium
GOST 11739.20-99: Aluminium casting and wrought alloys. Methods for determination of titanium
GOST 11739.21-90: Aluminium casting and wrought alloys. Methods for determination of chromium
GOST 11739.24-98: Aluminium casting and wrought alloys. Methods for determination of zinc
GOST 11739.6-99: Aluminium casting and wrought alloys. Methods for determination of iron
GOST 11739.7-99: Aluminium casting and wrought alloys. Methods for determination of silicon
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.4.013-85: Occupational safety standards system. Goggles. General specification
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 12.4.099-80: Women's overalls for protection against non-toxic substances, mechanical damage and general industrial contamination
GOST 12.4.100-80: Man's overalls for protection against non-toxic dust, mechanical effects and general industrial contaminations. Specifications
GOST 12697.10-77: Aluminium. Method for determination of titanium
GOST 12697.11-77: Aluminium. Method for determination of lead
GOST 12697.12-77: Aluminium. Methods for determination of arsenic
GOST 12697.1-77: Aluminium. Methods for determination of vanadium
GOST 12697.2-77: Aluminium. Methods for determination of magnesium
GOST 12697.3-77: Aluminium. Methods for determination of manganese
GOST 12697.4-77: Aluminium. Method for determination of sodium
GOST 12697.5-77: Aluminium. Method for determination of chromium
GOST 12697.6-77: Aluminium. Method for determination of silicon
GOST 12697.7-77: Aluminium. Method for the determination of iron
GOST 12697.8-77: Aluminium. Methods for determination of copper
GOST 12697.9-77: Aluminium. Methods for determination of zinc
GOST 13843-78: Rod aluminium wire. Technical conditions
GOST 14192-96: Cargo marking
GOST 162-90: Depth gauges. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 21132.0-75: Aluminium alloys. Method for determination of hydrogen content in molten metal
GOST 21132.1-98: Aluminium and aluminium alloys. Methods for determination of hydrogen in solid metal by vacuum hot extraction
GOST 23189-78: Primary aluminium. Spectrochemical method for the determination of arsenic and lead
GOST 24231-80: Non-ferrous metals and alloys. General requirements for sampling and sample preparation for chemical analysis
GOST 25086-87: Nonferrous metals and their alloys. General requirements for methods of analysis
GOST 26653-90: Preparation of general cargoes for transportation. General requirements
GOST 26877-91: Metal products
GOST 2771-81: Cold-drawn round wire. Gauge
GOST 27891-88: Polymer protective coatings for insulation, localization, deactivation and accumulation. Method for determination of stripping quality
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 3221-85: Primary aluminium. Methods of spectral analysis
GOST 3282-74: General-purpose low-carbon steel wire. Specifications
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7661-67: Dial depth gauges. Specifications
GOST 7727-81: Aluminium alloys. Methods of spectral analysis
GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications
The Document is Referenced By:
GOST 11070-2019: Primary aluminum ingots. Technical conditions
GOST 11070-74: Primary aluminium ingots. Specifications
GOST 26653-2015: Preparation of general cargoes for transportation. General requirements
GOST R 57434-2017: Primary aluminum and alloys based on it. Product form and delivery conditions. Marking, packing, transportation and storage
GOST R 58171-2018: Services in railway transport. Requirements for passenger service at railway stations
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.