GOST R 51069-97
ГОСТ Р 51069-97
|
|
Crude petroleum and petroleum products. Determination of density, relative density and API gravity. Hydrometer method
Нефть и нефтепродукты. Метод определения плотности, относительной плотности и плотности в градусах API ареометром
Status: Effective - Introduced for the first time
This standard applies to crude oil, petroleum products, mixtures of petroleum and liquid non-oil products with Reid vapor pressure of 179 kPa or less and establishes a method for determining density, relative density (specific gravity) or density in API fluids using a glass hydrometer
Настоящий стандарт распространяется на сырую нефть, нефтепродукты, смеси нефтей и жидкие ненефтяные продукты с давлением насыщенных паров по Рейду 179 кПа или менее и устанавливает метод определения плотности, относительной плотности (удельного веса) или плотности в грусах API с помощью стеклянного ареометра
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
7/3/1997
SKU: RUSS57348
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.2 Testing and control of products of fuel and energy industry »
4.2.2 Oil, oil products and gas »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.080 Petroleum products in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
B Oil products »
B0 General rules and regulations for oil refining industry »
B09 Test methods. Packaging. Marking »
National Standards for OKSTU »
OIL, PETROLEUM PRODUCTS, GAS »
Control methods (testing, analysis, measurements) »
The Document References:
GOST 1756-2000: Petroleum products. Determination of saturated vapours pressure
GOST 18481-81: Glass hydrometers and cylinders. General specifications
GOST 400-80: Glass thermometers for testing of petroleum products. Specifications
Letter 4042-OG/03: About a typo in GOST R 51069-97
The Document is Referenced By:
FR 1.29.2009.06689: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement procedure in vertical tanks
GOST 10585-2013: Petroleum fuel. Mazut. Specifications
GOST 10585-99: Oil fuel. Mazut. Specifications
GOST 305-2013: Diesel fuel. Specifications
GOST 31378-2009: Oil. General specifications.
GOST 32510-2013: Marine fuels. Specifications
GOST 32513-2013: Automotive fuels. Unleaded petrol. Specifications
GOST 32513-2023: Motor gasoline. Technical conditions
GOST 32595-2013: Aviation turbine fuel Jet A-1. Specifications
GOST 35074-2024: Petroleum Products. Calculation of the cetane index of middle distillate fuels using a four-variable equation
GOST 8.587-2019: State system for ensuring the uniformity of measurements. The mass of oil and petroleum products. Measurement procedures (methods)
GOST R 51105-97: Gasoline for combustion engines. Unleaded gasoline. Specifications
GOST R 51858-2002: Crude petroleum. General specifications
GOST R 51866-2002: Automotive fuels. Unleaded petrol. Specifications
GOST R 51907-2002: Motor oil for marine diesels М-20Г2СД. Specifications
GOST R 52050-2003: Aviation turbine fuel Jet A-1. Specifications
GOST R 52050-2006: Aviation turbine fuel Jet A-1. Specifications
GOST R 52368-2005: Diesel fuel EVRO. Specifications
GOST R 52755-2007: Liquid composite fuel. Specifications
GOST R 52782-2007: Gas turbines. Test methods. Acceptance tests
GOST R 53134-2008: Automotive spark-ignition engine fuels. Unleaded gasoline. Specifications
GOST R 53199-2008: Ethanol fuel. Determination of ethanol content by method of gas chromatography
GOST R 54281-2010: Petroleum products, lubricating oils and additives. Test method for determination of water by coulometric Karl Fischer titration
GOST R 54281-2022: Petroleum products, lubricating oils and additives. Method for Determination of Water by Coulometric Karl Fischer Titration
GOST R 54285-2010: Gasoline and methanol fuels. Determination of total oxygen content by methods of reductive pyrolysis
GOST R 54288-2010: Light liquid petroleum hydrocarbons. Determination of trace quantities of sulphur by oxidative microcoulometry
GOST R 54299-2010: Marine fuels. Specifications
GOST R 54331-2011: Fluids for electrotechnical applications. Unused mineral insulating oils for transformers and switchgear. Specifications
GOST R 54389-2011: Stable gas condensate. Specifications
GOST R 55475-2013: Dewaxed winter and arctic diesel fuel. Specifications
GOST R 55493-2013: Aviation gasoline Avgas 100LL. Specifications
GOST R 55775-2013: Aviation oil МС-8П. Specifications
GOST R 55798-2013: Gas Turbines. Methods of testing. Acceptance tests
GOST R 56146-2014: Denatured fuel ethanol, used as component of fuel for automotive spark-ignition engines. Technical requirements
GOST R 8.595-2002: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements to procedures of measurements
GOST R 8.595-2004: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. General requirements for procedures of measurements
GOST R 8.903-2015: State system for ensuring the uniformity of measurements. Mass of petroleum and petroleum products. Procedures of measurements
GOST R 8.908-2015: State system for ensuring the uniformity of measurements. Measuring instruments of volume flow of oil and oil products. Tests, verification and calibration with provers
GOST R ISO 8178-5-2009: Reciprocating internal combustion engines. Exhaust emission measurement - Part 5. Test fuels
ITS 50-2017: Processing of natural and accompanying gas
Letter 4042-OG/03: About a typo in GOST R 51069-97
Manual: Manual for impulse and low consumption fire extinguishing systems
MI 1974-2004: State system for ensuring uniformity of measurements. Turbine flow transducers. Method of verification
MI 2153-2001: State system for ensuring uniformity of measurements. Density of oil. Requirements for the method of performing measurements by the areometer with the operations taken into account
MI 2153-2004: State System of Measuring Uniformity Provision. Oil density. Requirements to areometer measurement procedures for discounting
MI 2632-2001: Recommendation. State system for ensuring uniformity of measurements. Density of oil and oil products and coefficients of volume expansion and compressibility. Methods and calculation program
MI 2643-2004: State system for ensuring uniformity of measurements. Hydrometers flow models L, M, F company "Phase Dynamic, Inc." (USA). Method of verification
MI 2693-2001: Crude Oil Metering Oil Production Facilities
MI 2837-2003: Oil hand-over and acceptance points metrological and technical support
MI 2950-2005: Recommendation. State system for ensuring uniformity of measurements. A lot of oil. Methods for performing measurements in horizontal tanks in the system of the main pipeline transport
MI 2951-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in vertical tanks in the system of main pipeline transport
MI 2952-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in railway tanks in the system of main pipeline transport
MI 2953-2005: State system for ensuring uniformity of measurements. Crude oil mass. Methods of measurement in automobile tanks in the system of the main oil pipeline transport
MI 2956-2005: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic transducers of oil consumption with a nominal diameter of 400 mm and more. Method of verification
MI 2972-2006: State system of measuring uniformity provision. Petroleum mass. Method of measuring by the system of petroleum quantity and properties measuring system No.1005 JSC ´Shugurovskiy petrochemical plant´
MI 2974-2006: State system of measuring uniformity provision. Class 2 piston-pipe calibration rigs. Verification method for class 1 piston-pipe calibration rig with comparator
MI 2975-2006: State system of measuring uniformity provision. Petroleum mass. Indirect measuring method of dynamic measurements on the registration point pump station 'Suslovo' JSC 'Uraltransnefteproduct'
MI 3200-2009: Recommendation. GSE. Mass of crude oil. Methods of measuring the system of measuring the amount and parameters of crude oil at the temporary loading point of the Bayandy field at the Chamber of Commerce and Industry Usinskneftegaz OOO Lukoil-Komi
MI 3241-2009: Recommendation. State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Measurement technique indirect method of dynamic measurements
MI 3242-2009: State system for ensuring uniformity of measurements. Mass and volume of petroleum products. Methods of measurement in horizontal tanks
MI 3275-2010: State system for ensuring uniformity of measurements. Metrological support for oil products account during transportation via main pipelines system. Main provisions
MI 3301-2010: Recommendation. State system for ensuring uniformity of measurements. Oil product pipeline. Acceptance points of petroleum products. Metrological and technical support
MI 3342-11: Recommendation. GSE. Requirements for testing laboratories that monitor the quality of oil
MP 208-002-2020: State system for ensuring the uniformity of measurements. The system for measuring the amount of oil products at ANP-1 LPPS
PNST 154-2016: Petroleum products. Recovery of quality parameters
R 50.2.040-2004: Metrological assurance of oil accounting when transferring via main pipeline system. Basic provisions
R 50.2.075-2010: State System for ensuring the uniformity of measurements. Crude Petroleum and Petroleum Products. Laboratory Methods for Determination of Density, Relative Density and API Gravity
RMG 85-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in railway tanks in the system of main oil pipeline transport. The main provisions
RMG 86-2009: State system for ensuring the uniformity of measurements. Mass of petroleum. Measurement procedure in vertical tanks in the main petrowire systems. Basic propositions
RMG 87-2009: National Measurement Assurance System. Mass of oil. Methods of measurement in horizontal tanks in the system of main oil pipeline transport. The main provisions
RMG 89-2010: State system for ensuring the uniformity of measurements. Acceptance point of oil. Metrological and technical assurance
RMG 94-2009: State system for ensuring the uniformity of measurements. Test laboratories performing of the quality control of oil at acceptance operations. Basic requirements
TU 38.101821-2001: Turbine oil TP-22C. Technical conditions
TU 38.101821-2013: Turbine oil Тп-22С brand 1. Specifications
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.