GOST R 51878-2002
ГОСТ Р 51878-2002
|
|
Adsorptive gas cleaners. Safety requirements and test methods
Газоочистители адсорбционные. Требования безопасности и методы испытаний
Status: Not effective - Canceled. Registration information 982-st dated 11/21/2012 (the official website of Rosstandart); IUS 10-2013
This standard applies to fixed bed adsorption scrubbers, moving granular adsorbent, vertical or horizontal fluidized dust adsorbent, and other devices similar in function. Adsorbers are designed to absorb gases or vapors from gas mixtures by solid absorbers (adsorbents). This standard can be used for certification of adsorbers.
Настоящий стандарт распространяется на адсорбционные газоочистители с неподвижным слоем, движущимся зернистым адсорбентом, псевдоожиженным пылевидным адсорбентом вертикального или горизонтального типа и другие, аналогичные по функциональному назначению аппараты. Адсорберы предназначены для поглощения газов или паров из газовых смесей твердыми поглотителями (адсорбентами). Настоящий стандарт может быть использован при сертификации адсорберов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
3/28/2002
SKU: RUSS57429
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
91 Building materials and construction »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Non-ferrous metals »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.8 Air-conditioning equipment and refrigeration equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.7 Gas generators and cleaning devices »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.30 Ventilation and air conditioning systems »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.140 Installations in buildings »
91.140.30 Ventilation and air conditioning systems »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G4 Machinery and equipment for heavy industry »
G47 Machines and equipment for chemical industry »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.049-80: Occupational safety standards system. Industrial equipment. General ergonomic requirements
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14776-79: Arc welding. Button welds. Main types, design elements and dimensions
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 14806-80: Arc welding of aluminium and aluminium alloys in inert gases. Welded joints. Main types, design elements and dimensions
GOST 15164-78: Electroslag welding. Welded joints. Main types, design elements and dimensions
GOST 15878-79: Resistance welding. Welded joints. Design elements and dimensions
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16038-80: Arc welding. Welded joints in pipelines of copper and copper-nickel alloy. Main types, design elements and dimensions
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17.2.4.06-90: Environment protection. Atmosphere. Methods for determination of velocity and flow rate of gas-and-dust streams from stationary sources of pollution
GOST 17.2.4.07-90: Environment protection. Atmosphere. Methods of determination of pressure and temperature of gas-and-dust streams from stationary sources of pollution
GOST 17.2.4.08-90: Environment protection. Atmosphere. Methods of determination of humidity of gas-and-dust streams from stationary sources of pollution
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 27580-88: Arc welding of aluminium and aluminium alloys in inert gases. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST R 50820-95: Scrubber and duster equipment. Methods of determination of dust load of gas-and-dust streams
The Document is Referenced By:
GOST 31834-2012: Adsorptive gas cleaners. Safety requirements and test methods
OST 34-10-428-90: Details and prefabricated units of pipelines of nuclear plants, working P<2.2 MPa, t ≤ 300 °C. Flanged plugs with a joggle. Construction and dimensions.
|
Customers Who Viewed This Item Also Viewed:
 |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
