GOST R 52229-2004
ГОСТ Р 52229-2004
|
|
Ignition control devices. General specifications
Устройства запально-защитные. Общие технические условия
Status: Effective - Introduced for the first time
This standard applies to ignition-protective devices (ZZU), designed for automatic and remote ignition of gas and fuel oil (including gas-oil, dust-gas and dust-gas) burners with a thermal capacity of more than 5 MW of stationary steam and water boilers, to control the presence of a pilot flame and main burners and transmission of information about their status to control systems, process protections, interlocks and alarms The requirements of the standard must be met with any burner layout schemes and during operation of the boilers, both with counterbalanced and supercharged. The requirements of this standard can be applied to the ignition system of the burners of process furnaces and other fuel-consuming installations, including with a thermal capacity of less than 5 MW
Настоящий стандарт распространяется на запально-защитные устройства (ЗЗУ), предназначенные для автоматического и дистанционного зажигания газовых и мазутных (в том числе газомазутных, пылегазовых и пылемазутных) горелочных устройств тепловой мощностью более 5 МВт стационарных паровых и водогрейных котлов, для контроля наличия пламени запальной и основной горелок и передачи информации о их состоянии в системы управления, технологических защит, блокировок и сигнализации. Требования стандарта должны выполняться при любых схемах компоновки горелок и при работе котлов как при уравновешенной тяге, так и под наддувом. Требования настоящего стандарта могут быть применены для ЗЗУ горелочных устройств технологических печей и других топливоиспользующих установок, в том числе при тепловой мощности менее 5 МВт
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
2/27/2004
SKU: RUSS57478
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
27 Power and heat engineering »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.20 Gas burners »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.20 Gas burners »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E2 Steam-powered equipment »
E21 Steam Boilers »
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12997-84: SSI Products. General specifications
GOST 14192-77: Marking of cargoes
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17356-89: Gas, oil fuel and combined burners. Terms and definitions
GOST 2.601-95: Operational documents
GOST 20448-90: Liquefied hydrocarbon fuel gases for domestic use. Specifications
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 21204-97: Industrial gas burners. General technical requirements
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 27570.0-87: Safety of household appliances and similar devices
GOST 29134-97: Industrial gas burners. Test methods
GOST 5542-87: Natural fuel gases for industrial and domestic use
GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread
GOST R 50460-92: Mark of conformity for obligatory certification form, dimensions dnd technical requirements
GOST R 51317.6.4-99: Electromagnetic compatibility of technical equipment. Emission from technical equipment intended for use in industry environments. Limits and test methods
GOST R 51842-2001: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.