GOST R 52599-2006
ГОСТ Р 52599-2006
|
|
Precious metals and their alloys. General requirements for methods of analysis
Драгоценные металлы и их сплавы. Общие требования к методам анализа
Status: Effective - Introduced for the first time
This standard establishes the general requirements for the analysis of precious metals (gold, silver, platinum, palladium, rhodium, iridium, ruthenium and osmium), including refined, and alloys based on precious metals, as well as safety requirements. The standard applies to newly developed and revised methods of quantitative chemical analysis used in quality control of precious metals and their alloys.
Настоящий стандарт устанавливает общие требования к методам анализа драгоценных металлов (золота, серебра, платины, палладия, родия, иридия, рутения и осмия), в том числе аффинированных, и сплавов на основе драгоценных металлов, а также требования безопасности. Стандарт распространяется на вновь разрабатываемые и пересматриваемые методики количественного химического анализа, применяемые при контроле качества драгоценных металлов и их сплавов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/29/2006
SKU: RUSS57503
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.3 Non-ferrous and precious metals »
ISO classifier »
77 METALLURGY »
77.120 Non-ferrous metals »
77.120.99 Other non-ferrous metals and their alloys »
National standards »
77 METALLURGY »
77.120 Non-ferrous metals »
77.120.99 Other non-ferrous metals and their alloys »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V5 Non-ferrous metals and their alloys. Rolled non-ferrous metals »
V59 Test methods. Packaging. Marking »
National Standards for OKSTU »
RAW MATERIALS OF NON-FERROUS METALS, NON-FERROUS METALS AND THEIR ALLOYS »
Control methods (testing, analysis, measurements) »
The Document References:
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements
GOST 29228-91: Laboratory glassware. Graduated pipettes. Part 2. Pipettes for which no waiting time is specified
GOST 29229-91: Laboratory glassware. Graduated pipettes. Part 3. Pipettes for which a waiting time of 15 s is specified
GOST 29251-91: Laboratory glassware. Burettes. Part 1. General requirements
GOST 6709-72: Distilled water. Specifications
GOST 8.315-97: Standard samples for composition and properties of substances and materials
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions
GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method
GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
GOST R ISO 5725-5-2002: Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
MI 2335-2003: State system for ensuring uniformity of measurements. Internal quality control of quantitative chemical analysis results
NRB 99: Radiation Safety Standards
PPB 01-03: On Approval Of Fire Safety Standards In The Russian Federation
R 50.2.003-2000: Internal quality control. Program complex QControl
RMG 60-2003: State system for ensuring the uniformity of measurements. Attested mixtures. General requirements for development
RMG 61-2003: State system for ensuring the uniformity of measurements. Accuracy, trueness and precision measures of the procedures for quantitative chemical analysis. Methods of determination
ST SEV 543-77: Numbers. Requirements for Notation and Rounding Off
The Document is Referenced By:
GOST 12338-2020: Iridium powder refined. Specifications
GOST 13462-2010: Palladium and its base alloys. Marks
GOST 13498-2010: Platinum and its base alloys. Marks
GOST 18389-2014: Wire of platinum and platinum alloys. Specifications.
GOST 18390-2014: Wire of palladium and palladium alloys. Specifications.
GOST 19738-2015: Silver solders. Marks
GOST 19739-2015: Strips from silver solders. Specifications
GOST 19746-2015: Wire made of silver solders. Specification
GOST 21007-2014: Platinum wire for resistive temperature transducers. Specifications
GOST 25474-2015: Anodes silver. Specifications
GOST 25475-2015: Anodes golden. Specifications
GOST 28058-2015: Gold in ingots. Specifications
GOST 28353.1-2017: Silver. Method of ark atomic-emission analysis
GOST 28353.2-2017: Silver. Method of inductively coupled plasma atomic-emission analysis
GOST 28353.3-2017: Silver. Method of atomic-absorption analysis
GOST 28595-2015: Silver in ingots. Specifications
GOST 30649-99: Noble metals based alloys for jewellery. Marks
GOST 3193-2015: Platinum alloys catalytic gauzes. Specifications
GOST 34369-2017: Silver. Method of spark atomic-emission analysis
GOST 6563-2016: Technical articles made from noble metals and alloys. Specifications
GOST 6902-2018: Leaf gold and silver. Specifications
GOST 7221-2014: Strips made of gold, silver and their alloys. Specifications
GOST 7222-2014: Wire made of gold, silver and their alloys. Specifications
GOST R 51572-2000: Gold weighted bullions. Specifications
GOST R 52950-2008: Palladium. Method for determination of mass loss after ignition
GOST R 52951-2008: Palladium. Methods of arc atomic-emission analysis
GOST R 53197-2008: Jewellery. Fineness of precious metal alloys
GOST R 53198-2008: Ores and concentrates of non-ferrous metals. General requirements for methods of chemical analysis
GOST R 53372-2009: Gold. Methods of analysis
GOST R 54151-2010: Platinum alloys catalytic gauzes. Specifications
GOST R 54313-2011: Palladium. Method of inductively coupled plasma atomic-emission analysis
GOST R 54335-2011: Palladium. Method of spark atomic-emission analysis
GOST R 54493-2011: Iridium. Rhodium. Ruthenium. Method for determination of mass loss after ignition
GOST R 55084-2012: Strips and foil made of iridium and rhodium. Specifications
GOST R 55558-2013: Sulphide copper-nickel ore. Mass-spectrometry method for determination of platinum, palladium, rhodium, ruthenium, iridium and cold content with preliminary collecting for nickel matte
GOST R 56142-2014: Silver. Method of ark atomic-emission analysis
GOST R 56306-2014: Silver. Method of inductively coupled plasma atomic-emission analysis
GOST R 56307-2014: Silver. Method of spark atomic-emission analysis
GOST R 56308-2014: Silver. Method of atomic-absorption analysis
R 50.2.090-2013: State system for ensuring the uniformity of measurements. Quantitative chemical analysis procedures. General requirements for development, certification and application
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.