GOST R 52990.3-2010
ГОСТ Р 52990.3-2010
|
|
Noise of machines. Textile machinery. Noise test code. Part 3. Nonwoven machinery
Шум машин. Машины текстильные. Испытания на шум. Часть 3. Машины для производства нетканых материалов
Status: Effective - Introduced for the first time
This standard, used in conjunction with ISO 9902-1, specifies the installation conditions, mode of operation and methods of measurement, reporting and confirmation of the noise of machines for the production of nonwoven materials. The standard applies to the following machines: - Carding machines and machines; - knitting machines; - Needle punched machines. Other machines used for the production of nonwovens are considered in [1] - [3]. The standard establishes a technical (degree of accuracy 2) and approximate (degree of accuracy 3) noise measurement methods
Настоящий стандарт, применяемый совместно со стандартом ИСО 9902-1, устанавливает условия монтажа, режим работы и методы измерений, заявления и подтверждения шума машин для производства нетканых материалов. Стандарт распространяется на следующие машины: - аппараты и машины чесальные; - машины вязально-прошивные; - машины иглопробивные. Другие машины, применяемые для производства нетканых материалов, рассмотрены в [1] - [3]. Стандарт устанавливает технический (степень точности 2) и ориентировочный (степень точности 3) методы измерения шума
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/30/2010
SKU: RUSS57545
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
5 Protection against mechanical vibrations »
5.2 Acoustic noise »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.6 Light industry machinery and equipment »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.20 Noise from machinery and equipment »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.20 Noise from machinery and equipment »
ISO classifier »
59 TEXTILE AND LEATHER PRODUCTION »
59.120 Textile machinery »
59.120.99 Other textile machines »
National standards »
59 TEXTILE AND LEATHER PRODUCTION »
59.120 Textile machinery »
59.120.99 Other textile machines »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T3 Physics and Mechanics »
T34 Oscillatory and wave-like movements. Bodies vibration. Sound. Acoustics »
The Document References:
GOST 27243-2005: Noise of machines. Determination of sound power levels using sound pressure. Comparison method in situ
GOST 30457-97: Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points. Engineering method
GOST 30683-2000: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections
GOST 31169-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ
GOST 31172-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane
GOST ISO 11201-2016: Machine noise. Determination of sound pressure levels in the workplace and at other control points in a substantially free sound field above the reflective plane
GOST ISO 11202-2016: Machine noise. Determination of sound pressure levels in the workplace and at other control points with approximate corrections to the properties of the test space
GOST ISO 11204-2016: Machine noise. Determination of sound pressure levels in the workplace and at other control points with precise corrections to the properties of the test space
GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
GOST R 52990.1-2008: Noise of machines. Textile machinery. Noise test code. Part 1. Common requirements
GOST R ISO 3744-2013: Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane
GOST R ISO 3746-2013: Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey methods using an enveloping measurement surface over a reflecting plane
The Document is Referenced By:
GOST R ISO 23771-2015: Textile machinery. Guide to the design of noise-reduced textile machinery
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
