GOST R 53463-2009
ГОСТ Р 53463-2009
|
|
Hammers. Safety requirements
Молоты. Требования безопасности
Status: Not effective - Canceled. Registration information 1006-st dated November 22, 2012 (official site of Rosstandart)
This standard applies to the designed, manufactured and upgraded hammers: pneumatic forging, steam-forging and stamping, air sheet-stamping, zero-speed high-speed stamping, hydraulic stamping, mechanical, special, lines and complexes of equipment based on them, automation and mechanization to them. This standard establishes safety requirements for the design of hammers, their units and components. This standard is used in conjunction with GOST 12.2.003, GOST 12.2.017. Safety requirements, depending on the design of hammers or their operating conditions, should be indicated in technical documents (technical conditions, operating manual) for hammers of specific types
Настоящий стандарт распространяется на проектируемые, изготовляемые и модернизируемые молоты: пневматические ковочные, паровоздушные ковочные и штамповочные, воздушные листоштамповочные, бесшаботные высокоскоростные штамповочные, гидравлические штамповочные, механические, специальные, линии и комплексы оборудования на их базе, средства автоматизации и механизации к ним. Настоящий стандарт устанавливает требования безопасности к конструкциям молотов, их агрегатам и узлам. Настоящий стандарт применяют совместно с ГОСТ 12.2.003, ГОСТ 12.2.017. Требования безопасности, в зависимости от особенностей конструкций молотов или условий их эксплуатации, следует указывать в технических документах (технических условиях, руководстве по эксплуатации) на молоты конкретных типов
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/9/2009
SKU: RUSS57594
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.120 Chipless processing equipment »
25.120.10 Forging equipment. The press. Scissors »
National standards »
25 MECHANICAL ENGINEERING »
25.120 Chipless processing equipment »
25.120.10 Forging equipment. The press. Scissors »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G0 General rules and regulations for engineering »
G07 Safety »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12.0.002-80: Occupational safety standards system. Terms and definitions
GOST 12.0.003-74: Dangerous and harmful production effects. Classification
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.13-2000: Occupation safety standards system. Electric lamps. Safety requirements
GOST 12.2.007.14-75: Cables and cable fittings. Safety requirements
GOST 12.2.007.1-75: Occupation safety standards system. Rotating electric machines. Safety requirements
GOST 12.2.007.2-75: Occupation safety standards system. Power transformers and reactors. Safety requirements
GOST 12.2.007.6-75: Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v
GOST 12.2.012-75: Occupational safety standards system. Devices to ensure the safety of works. General requirements
GOST 12.2.017-93: The forging and pressing equipment general safety requirements
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.2.061-81: Occupational safety standards system. Industrial equipment. General safety requirements to working places
GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors
GOST 12.2.064-81: Occupational safety standards system. Controls of industrial equipment. General safety requirements
GOST 12.2.101-84: Pneumatic drives
GOST 12.3.001-85: System of labor safety standards pneumatic drives
GOST 12.4.040-78: Industrial equipment controls
GOST 18322-78: Equipment maintenance and repair system. Terms and definitions
GOST 18323-86: Forming equipment. Terms and definitions
GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements
GOST 21753-76: Man -machine system control levers
GOST 22269-76: Man-machine system Operator workplace layout of workplace elements General ergonomic requirements
GOST 22613-77: Man-machine system. Rotary switches and commutators. General ergonomic requirements
GOST 22614-77: «Man-machine» system. Key-actuated and push-button switches and commutators. General ergonomic requirements
GOST 22789-94: Low-voltage unitized devices
GOST 26583-85: Maintenance system for technological equipment of engineering work. Metal cutting, forge-and-pressing, casting and woodworking operational and
GOST 7600-90: Press-forging plant
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 52543-2006: Hydraulic drives. Safety requirements
GOST R 52869-2007: Pneumatic drives. Safety requirements
GOST R IEC 60204-1-2007: Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements
The Document is Referenced By:
GOST 31541-2012: Hammers. Safety requirements
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.