GOST R 8.642-2008
ГОСТ Р 8.642-2008
|
|
State system for ensuring the uniformity of measurements. Metrological maintenance of measuring systems of units of the account of thermal energy. Main principles
Государственная система обеспечения единства измерений. Метрологическое обеспечение измерительных систем узлов учета тепловой энергии. Основные положения
Status: Not effective - Canceled. Registration information 665-st dated 06/05/2015 (the official website of FSUE "Standartinform")
This standard applies to measuring systems (ICs) intended for measuring thermal energy and coolant parameters developed for specific objects from metering station components and accepted as finished products directly at the place of operation (EC-2 according to GOST R 8.596), as well as ICs type IS-1 according to GOST R 8.596 and heat meter according to GOST R 51649, GOST R EN 1434-1, included in the metering of thermal energy. The standard establishes the main provisions for the metrological support of IP at the stages of their life cycle
Настоящий стандарт распространяется на измерительные системы (ИС), предназначенные для измерения тепловой энергии и параметров теплоносителя, разрабатываемые для конкретных объектов из компонентов узла учета и принимаемые как законченные изделия непосредственно на месте эксплуатации (ИС-2 по ГОСТ Р 8.596), а также на ИС вида ИС-1 по ГОСТ Р 8.596 и теплосчетчика по ГОСТ Р 51649, ГОСТ Р ЕН 1434-1, входящие в состав узлов учета тепловой энергии. Стандарт устанавливает основные положения по метрологическому обеспечению ИС на этапах их жизненного цикла
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
5/19/2008
SKU: RUSS57763
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T80 Rules, norms, regulations infield of ensuring uniformity of measurements »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
State system for ensuring the uniformity of measurements (GSI) »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 34.201-89: Information technology. Set of standards for automated systems. Types, sets and indication of documents for automated systems making
GOST 34.601-90: Information technology. Set of standards for automated systems. Automated systems. Stages of development
GOST 34.602-89: Information technology. Set of standards for automated systems. Technical directions for automated system making
GOST 34.603-92: Information technology. Types tests automated systems
GOST 4.199-85: System of product-quality indices. Infermation electrical measuring systems. Nomenclature of indices
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.586.1-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
GOST 8.586.2-2005: State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements
GOST 8.586.5-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50739-95: Computers technique. Information protection against unauthorised access to information. General technical requirements\
GOST R 51649-2000: Heat meters for water heat supply systems. General specifications
GOST R 51841-2001: Programmable controllers. General technical requirements and test methods
GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.591-2002: State system for ensuring the uniformity of measurements. Two channel heat meters for water heat supply systems. Standardization of admitted error limits in measurements of the used thermal energy by users
GOST R 8.592-2002: State system for ensuring the uniformity of measurements. Thermal energy, received by users in water heat supply system. Typical procedure of measurements
GOST R 8.596-2002: State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.
GOST R EN 1434-1-2006: Heat meters. Part 1. General requirements
GOST R IEC 870-5-1-95: Telecontrol equipment and systems. Part 5. Transmission protocols. Section 1. Transmission frame formats
MI 1314-86: State system for ensuring uniformity of measurements. The order of the metrological examination of technical tasks for the development of measuring instruments. Methodical instructions
MI 1317-2004: State system for ensuring uniformity of measurements. Results and characteristics of the measurement error. Forms of representation. Ways to use during testing of product samples and control over the parameters of product samples and control of their para
MI 2146-98: National Measurement Standards. Procedure for Development and Requirements for Content of Programs for Testing Means of Measurement for Approval of their Type
MI 2168-91: State system for ensuring uniformity of measurements. Measuring information systems. The method of calculating the metrological characteristics of the measuring channels according to the metrological characteristics of the linear analogs of the components
MI 2174-91: Recommendation. State system for ensuring uniformity of measurements. Certification of algorithms and data processing programs for measurements. Main provisions
MI 222-80: Calculation procedure for metrological characteristics of measuring channels of information and measurement systems based on metrological characteristics of their components
MI 2304-94: Metrological Monitoring and Supervision by Metrological Services of Juridical Persons
MI 2412-97: Recommended Practice. National Measurement Standards. Piped Hot Water Heat Supply Systems. Equations for Measurement of Thermal Energy and Quantity of Heat Transfer Agent
MI 2439-97: National system for measurements unification. The measuring system metrological characteristics. Notation. The principles of regulation, definition and control.
MI 2440-97: The State Measurements System. Methods of experimental determination and control characteristics of the error of measurement channels for measuring systems and measurement systems.
MI 2441-97: Tests for the approval of the measuring systems types. General requirements. Guidelines
MI 2451-98: National Measurement Standards. Steam Pipe Heat Supply Systems. Equations for Measuring Thermal Energy and Quantity of Heat Transfer Agent
MI 2479-98: Heat meters. Typical test program for type approval purpose
MI 2539-99: GSE. Measuring channels of controllers, measuring and computing, control, software and hardware systems. General requirements for methods of verification
MI 2553-99: National Measurement Standards. Thermal Energy and Heat Transfer Agent in Piped Heat Supply Systems. Method for Assessment of Measurement Error. Basic Principles
MI 2554-99: National Measurement Standards. Heat Meters. Method for Tests in Order to Confirm Testing Intervals. General Requirements
MI 2594-2000: State system for ensuring uniformity of measurements. Heat meters and coolant quantity counters. The method of establishing and confirming the verification intervals
MI 2714-2002: National Measurement Standards. Thermal Energy and Mass of Heat Transfer Agent in Piped Heat Supply Systems. Method for Measurements. Basic Principles
MI 2891-2004: Recommendation. GSOEI. General requirements for measurement software
MI 2955-2005: GSE. Typical methods of certification of software measuring devices and the order of its implementation
Order VK-4936: Rules for metering heat energy and heat carrier
PR 50.2.002-94: Procedure for Government Metrological Inspection of the Manufacturing, Condition, and Application of Measuring Devices Certified Using Measurement Procedures, Standards, and Compliance with Metrological Standards and Codes
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
PR 50.2.010-94: National Measurement Standards. Requirements for Government Centers for Testing Means of Measurement and Procedure for Their Accreditation
PR 50.2.013-97: GSOEI. The procedure for accreditation of the metrological services of legal entities to the right of certification of measurement procedures and metrological examination of documents
PR 50.2.016-94: National Measurement Standards. Requirements for Calibration Procedures
PR 50.2.022-99: National system for uniformity of measurements of the Kyrgyz Republic. The procedure of state control and supervision over the use and condition of measurement kits with restrictive flow orifice devices.
R 50.2.026-2002: National Measurement Standards. Resistive Temperature Transducers and Electromagnetic Flowmeters in Commercial Heat Metering Installations. Method for Selection of Pairs of Temperature Transducers and Matching Flowmeters According to Metrological Charac
RMG 51-2002: State system for ensuring the uniformity of measurements. Documentats for verification methods of measuring instruments. Basic statements
RMG 63-2003: State system for ensuring the uniformity of measurements. Providing measurement efficiency in control of technological processes. Metrological expertise of the technical documentation
RMG 74-2004: State system for ensuring the uniformity of measurements. Methods for determining the intervals of verification and calibration of measuring instruments
SNiP 41-02-2003: Heat networks
The Document is Referenced By:
GOST R 8.728-2010: State system for ensuring the uniformity of measurements. Estimation of errors of measurements of thermal energy and weight of the heat-carrier of water systems of the heat supply
GOST R 8.778-2011: State system for ensuring the uniformity of measurements. Measuring instruments of heat energy hot-water heating systems. Metrological assurance. Main principles
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
