GOST ISO 161-1-2004
ГОСТ ИСО 161-1-2004
|
|
Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Metric series
Трубы из термопластов для транспортирования жидких и газообразных сред. Номинальные наружные диаметры и номинальные давления. Метрическая серия
Status: Effective
The standard establishes the nominal outer diameters of pipes of thermoplastics of the metric series for transporting liquid and gaseous media under pressure and without pressure, as well as the levels of nominal pressure, minimum long-term strength and safety factors for pipes of thermoplastics under pressure. The standard applies to smooth pipes of thermoplastic round and constant along the entire length of the cross section, regardless of the method of their manufacture or the material used.
Стандарт устанавливает номинальные наружные диаметры труб из термопластов метрической серии для транспортирования жидких и газообразных сред под давлением и без давления, а также уровни номинальных давлений, минимальную длительную прочность и коэффициенты запаса прочности для труб из термопластов, работающих под давлением. Стандарт распространяется на гладкие трубы из термопластов круглого и постоянного по всей длине сечения независимо от метода их изготовления или использованного материала.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/5/2004
SKU: RUSS58024
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.20 Plastic pipes »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.30 Plastic pipes, fittings not for liquids »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.140 Rubber and plastic products »
83.140.30 Plastic pipes, fittings not for liquids »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L26 Plastic products »
The Document is Replaced With:
GOST ISO 161-1-2019: Thermoplastics pipes for transporting liquid and gaseous media. Nominal outside diameters and nominal pressures. Part 1. Metric Series
As a Replacement Of:
GOST 29324-92: Thermoplastics pipes for the transport of fluids. Nominal outside diameters and nominal pressures
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation
GOST 29324-92: Thermoplastics pipes for the transport of fluids. Nominal outside diameters and nominal pressures
GOST 8032-84: Preferred numbers and series of preferred numbers
The Document is Referenced By:
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST ISO 11922-1-2006: Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. Part 1. Metric series
GOST ISO 11922-1-2019: Thermoplastics pipes for transporting liquid and gaseous media. Dimensions and tolerances. Part 1. Metric Series
GOST ISO 4065-2005: Thermoplastics pipes. Universal wall thickness table
GOST ISO 4065-2019: Thermoplastics pipes. Universal wall thickness table
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 53630-2009: Pressure multilayer pipes for water-supply and heating systems. General specifications
GOST R 53630-2015: Multilayer pressure pipes for water supply and heating systems. General specifications
GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines
GOST R 56730-2015: Plastic flexible pipes with thermal insulation for district heating. General specifications
GOST R 56927-2016: Pipes made of oriented unplasticized polyvinylchloride for water supply. Specifications
GOST R 58097-2018: Flexible reinfonced plastic pipes with thermal insulation and fittings for them for district heating and water-supply networks. General specification
GOST R ISO 10467-2013: Glass-reinforced thermosetting plastics piping systems based on unsaturated polyester resins for pressure and non-pressure drainage and sewerage. General technical requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
