GOST R 54773-2011
ГОСТ Р 54773-2011
|
|
Anchor supports. Test methods for anchor
Крепи анкерные. Методы испытаний анкеров
Status: Effective - Introduced for the first time. IUS 11-2012
The standard applies to anchors designed to secure and maintain mine workings in order to maintain their working condition and the required cross-sectional dimensions. The standard establishes methods for testing and monitoring the safety and quality indicators of anchors as industrial products.
Стандарт распространяется на анкеры, предназначенные для крепления и поддержания горных выработок в целях сохранения их рабочего состояния и необходимых размеров поперечного сечения. Стандарт устанавливает методы испытаний и контроля показателей безопасности и качества анкеров как промышленных изделий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/13/2011
SKU: RUSS58036
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
73 Mining and minerals »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.4 Machines and equipment for mining, oil industry and quarrying »
ISO classifier »
73 MINING AND MINERAL PRODUCTS »
73.100 Mining equipment »
73.100.10 Equipment for heading and installation of tubing lining »
National standards »
73 MINING AND MINERAL PRODUCTS »
73.100 Mining equipment »
73.100.10 Equipment for heading and installation of tubing lining »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G4 Machinery and equipment for heavy industry »
G41 Exploration, mining and mineral processing equipment »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 166-89: Vernier callipers. Specifications
GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement
GOST 2.102-68: Types and complete set of design documents
GOST 2.105-95: General requirements for writing documents
GOST 2.114-95: Unified system for design documentation. Specifications
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.602-95: Unified system for design documentation. Repair documents
GOST 24297-87: Input inspection of products. General provisions.
GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8.513-84: State system for ensuring the uniformity of measurements. Verification of measuring instruments. Organization and procedure
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 50910-96: Metal frame yield supports. Test methods
GOST R 52042-2003: Anchor supports. General specifications
GOST R ISO/IEC 17025-2006: General requirements for the competence of testing and calibration laboratories
PB 05-618-03: Coal Mine Safety Regulations
PR 50.2.006-94: Procedure for calibration of measurement equipment
The Document is Referenced By:
GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.