imgalt

GOST R 52615-2006

ГОСТ Р 52615-2006

Compressors and vacuum pumps. Safety requirements. Part 2. Vacuum pumps

Компрессоры и вакуумные насосы. Требования безопасности. Часть 2. Вакуумные насосы

Status: Effective - Introduced for the first time

This standard applies to all types of vacuum pumps, combinations of vacuum pumps and vacuum systems and establishes the main types of hazards emanating from vacuum pumps. The standard establishes the safety requirements for pumps, their transportation and storage, installation, operation, maintenance and disassembly during the intended service life and subsequent disposal. This standard does not apply to pumps for continuous pumping in open systems in which the pressure at the pump inlet does not fall below 75 kPa (for example, in vacuum cleaners, fans). Requirements for individual types of pumps can be supplemented in accordance with the requirements of regulatory documents for a particular type of pump

Настоящий стандарт распространяется на все типы вакуумных насосов, комбинаций вакуумных насосов и вакуумные системы и устанавливает основные виды опасностей, исходящие от вакуумных насосов. Стандарт устанавливает требования безопасности, предъявляемые к насосам, их транспортированию и хранению, установке, эксплуатации, техническому обслуживанию и демонтажу во время предполагаемого срока эксплуатации и последующей утилизации. Настоящий стандарт не распространяется на насосы для непрерывного откачивания в открытых системах, в которых давление на входе насоса не падает ниже 75 кПа (например в пылесосах, вентиляторах). Требования, для отдельных типов насосов могут быть дополнены в соответствии с требованиями нормативных документов на насос конкретного типа

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/20/2006

SKU: RUSS58051

Price: $190.08



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.12 Safety requirements when working with compressors and pressure vessels »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.160 Vacuum technology »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.160 Vacuum technology »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G8 Machinery and equipment of universal application » G82 Machines for moving gases and liquids (pumps, compressors, fans, blowers) »


The Document References:

Federal Law 184-FZ: About technical regulation

GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 30691-2001: Noise of machines. Declaration and verification of noise emission values

GOST 5197-85: Vacuum technology. Terms and definitions

GOST ISO/TO 12100-1-2001: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terms, procedure

GOST ISO/TO 12100-2-2002: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles and technical requirements

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods

GOST R 51334-99: Safety of machinery. Safety distances to prevent danger zones being reached by the upper limbs

GOST R 51336-99: Safety of machinery. Emergency stop equipment. Functional aspects. Principles for design

GOST R 51337-99: Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces

GOST R 51342-99: Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards

GOST R IEC 60204-1-99: Safety of machinery. Electrical equipment of machines. Part 1. General requirements

NRB 99: Radiation Safety Standards

PB 03-576-03: Regulations of design and safe operation of pressure vessels

SP 2.6.1.799-99: Main sanitary regulations to ensure radiation safety

The Document is Referenced By:

GOST 33518-2015: Vacuum technology. Turbo-molecular pumps. Measurement of performance characteristics

GOST 33866-2016: Vacuum technology. Turbomolecular pumps. Measurement of rapid shutdown torque

GOST 34058-2017: Internal buildings and structures utilities. Mounting and start-up adaptive control of air-conditioning evaporative and condensing units. General technical requirements

GOST R 53334-2009: Vacuum equipment. Vapour vacuum pumps. Measurement of performance characteristics. Part 1. Measurement of volume rate of flow (pumping speed)

GOST R 53335-2009: Vacuum equipment. Positive-displacement vacuum pumps. Measurement of performance characteristics. Part 1. Measurement of volume rate of flow (pumping speed)

GOST R 54107-2010: Vacuum equipment. Positive-displacement vacuum pumps. Measurement of performance characteristics. Part 2. Measurement of ultimate pressure

GOST R 54108-2010: Vacuum equipment. Vapour vacuum pumps. Measurement of performance characteristics. Part 2. Measurement of ultimate pressure and critical backing pressure

GOST R 54807-2011: Vacuum technology. Standard methods for measuring vacuum-pump performance

GOST R 57894-2017: Equipment for electron beam processing. General requirements

GOST R 70379-2022: Trunk pipeline transport of oil and petroleum products. Oil and petroleum products vapor recovery unit of combined (adsorption-absorption) type. Technical specifications

MUK 4.1.3482-17: Measurement of the mass concentration of vitamin K1 in serum by high performance liquid chromatography (HPLC)

RD 52.10.778-2013: Mass concentration of dissolved forms of iron, manganese and chromium in samples of sea water. Measurement Technique by Atomic Absorption Spectrometry

No related products viewed by other customers

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!