imgalt

GOST R 55474-2013

ГОСТ Р 55474-2013

Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines

Системы газораспределительные. Требования к сетям газораспределения. Часть 2. Стальные газопроводы

Status: Effective - Introduced for the first time

This standard establishes requirements for the design, construction, reconstruction and operation of steel gas pipelines of gas distribution networks with a maximum operating pressure of up to 1.2 MPa inclusive in addition to the requirements established by GOST R 55472-2013. The requirements of this standard apply to external gas pipelines for gas distribution from steel pipes, including technical devices located on gas pipelines (with the exception of pressure regulators and filters), including pipe fittings, compensators, condensate traps, hydraulic locks, and electrochemical corrosion protection

Настоящий стандарт устанавливает требования к проектированию, строительству, реконструкции и эксплуатации стальных газопроводов сетей газораспределения с максимальным рабочим давлением до 1,2 МПа включительно в дополнение к требованиям, установленным ГОСТ Р 55472-2013. Требования настоящего стандарта распространяются на наружные газопроводы сети газораспределения из стальных труб, включая технические устройства, расположенные на газопроводах (за исключением регуляторов давления и фильтров), в том числе трубопроводную арматуру, компенсаторы, конденсатосборники, гидрозатворы, средства электрохимической защиты от коррозии

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 6/5/2013

SKU: RUSS58052

Price: $219.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Metal structures »

Welding regulations » Welding materials »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Electrodes »

Welding regulations » Welding materials » Gases »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.7 For construction and housing and communal services »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.2 For gas industry »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.01 Pipelines and their components in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.01 Pipelines and their components in general »


The Document is Replaced With:

GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines

The Document References:

Code 190-FZ: Town Planning Code of the Russian Federation

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10692-80: Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage

GOST 10704-91: Electrically welded steel line-weld lubes. Range

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces

GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions

GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

GOST 17375-2001: Carbon and low-alloy steel butt-welding fittings. Sharply curved bends type 3D (R=1,5 DN). Design

GOST 17376-2001: Carbon and low-alloy steel butt-welding fittings. Tees. Design

GOST 17378-2001: Carbon and low-alloy steel butt-welding fittings. Reducers. Design

GOST 17379-2001: Carbon and low-alloy steel butt-welding fittings. Elliptical caps. Design

GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 30753-2001: Carbon and low-alloy steel butt-weldings fittings. Sharply curved bends type 2D (R=DN). Design

GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST 31458-2012: Steel pipes, tubes and pipe products. Inspection documents

GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions

GOST 380-2005: Common quality carbon steel. Grades

GOST 4543-71: Structural alloyed steel

GOST 6527-68: Female ends with pipe cylindrical thread. Dimensions

GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8732-78: Seamless hot-deformed steel pipes. Range of sizes

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 8969-75: Pipe steel connections with cylindrical thread for pipelines P=1,6 МPа. Adapter couplings. Basic dimensions

GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection

GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications

GOST R 1.0-2012: Standardization in the Russian Federation. Basic provisions

GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 55436-2013: Gas distribution systems. Coatings with extruded polyethylene on steel pipes. General technical requirements

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R ISO 15609-2-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Part 1. Gas welding

GOST R ISO 15614-1-2009: Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 1. Arc and gas welding of steels and arc welding of nickel and nickel alloys

GOST R ISO 2560-2009: Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification

GOST R ISO 3834-1-2007: Quality requirements for fusion welding of metallic materials. Part 1. Criteria for the selection of the appropriate level of requirements

GOST R ISO 3834-2-2007: Quality requirements for fusion welding of metallic materials. Part 2. Comprehensive quality requirements

GOST R ISO 3834-3-2007: Quality requirements for fusion welding of metallic materials. Part 3. Standard quality requirements

GOST R ISO 3834-4-2007: Quality requirements for fusion welding of metallic materials. Part 4. Elementary quality requirements

RD 03-606-03: Instructions for visual and measuring control

RD 153-39.4-091-01: Instructions for protection of urban underground pipelines from corrosion.

SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85

The Document is Referenced By:

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General

GOST R 55473-2013: Gas distribution systems. Requirements for gas distribution networks. Part 1. Polyethylene gas pipelines

GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines

GOST R 56290-2014: Gas distribution systems. Requirements to gas distribution networks. Part 3. Renovation

GOST R 58094-2018: Gas distribution systems. Gas distribution networks. Service life assessment in design of outdoor steel gas pipelines

GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!