imgalt

GOST 14034-74

ГОСТ 14034-74

Centre holes. Dimensions

Отверстия центровые. Размеры

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Resolution of the State Standard No. 1638 dated 04/01/81

The standard establishes the shape and size of center holes.

Стандарт устанавливает формы и размеры центровых отверстий.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 9/27/1974

SKU: RUSS58305

Price: $64.00

English keywords: fasteners;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 21 Mechanical systems and general purpose devices »

Standards for pipe fittings (TPA) » 8. Piping valves (TPA) design » 8.1 General design issues piping valves (TPA) » 8.1.2 Interchangeability and other design requirements »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.01 Fasteners in general »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.01 Fasteners in general »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G0 General rules and regulations for engineering » G02 Norms of calculation and design »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » General rules and regulations for mechanical engineering »


As a Replacement Of:

GOST 14034-68: Centre holes. Dimensions

The Document References:

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits

GOST 24644-81: Spindle noses and tool shanks of drilling, boring and milling machines. Dimensions. Technical requirements

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 25557-82: Machine tool tapers. Basic dimensions

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 7343-72: Tools with tapers 1:10 and 1:7. Dimensions

GOST 9953-82: Shortened tapers of tools. Basic dimensions

The Document is Referenced By:

GOST 10079-71: Tapered reamers with taper shank for Morse tapers. Design and dimensions

GOST 10080-71: Tertic taper reamers with 1:20 with tapered shank. Design and dimensions

GOST 10082-71: Taper reamers with taper 1:30 with tapered shank. Design and dimensions

GOST 10494-80: Studs for flanged connections with lens-shaped seals for pn - 10-100 MPa (100-1000 kgf/sq sm). Technical requirements

GOST 10673-75: T-slot cutters with hard metal tips. Specifications

GOST 10902-77: Twist drills with straight shanks. Middle series. Basic dimensions

GOST 11172-70: Extra long machine reamers. Design and dimensions

GOST 11175-80: Machine reamers, equipped with plates of hard alloy. Design and dimensions

GOST 11177-84: Hand tapered reamers with cylindrical shank, taper 1:50. Basic dimensions

GOST 11180-71: 1;7 Taper reamers. Design and dimensions

GOST 11181-71: Morse short taper reamers. Design and dimensions

GOST 11182-71: Morse taper reamers with cylindrical shank. Design and dimensions

GOST 11183-71: Metric taper reamers with 1:20 with cylindrical shank. Design and dimensions

GOST 11379-80: Dynamic Pumps for waste liquids. General specifications

GOST 11447-80: Locking studs for Py 10-100 MPa (100-1000 kgf/cm2). Technical requirements

GOST 12122-77: Twist drills with short straight shanks. Long series. Basic dimensions

GOST 12206-66: Holding devices. Fit shanks. Design

GOST 12213-66: Holding devices. Locating pins. Design

GOST 13044-83: Arbouns for shell multiflute drills and reamers. Construction and dimensions

GOST 13044-85: Arbouns for shell multiflute drills and reamers. Construction and dimensions

GOST 13215-79: Thrust centers and semi-centers

GOST 1336-77: Thread milling cutters. Specifications

GOST 14740-69: Dowels. Design

GOST 14901-93: Moulds for the manufacture of industrial rubber articles

GOST 14952-75: Combined centre drills. Specifications

GOST 14953-80: Taper countersinks

GOST 15069-75: Tool holders with straight guide and Morse taper shank for horizontal milling machines. Design and dimensions

GOST 15070-75: Tool holders with supporting bush and Morse taper shank for horizontal milling machines. Design and dimensions

GOST 1523-81: Straight reamers

GOST 1604-71: Nut taps. Design

GOST 16088-70: Solid carbide machine reamers. Specifications

GOST 16158-70: Quick-change jaw chucks for broaches of horizontal broaching machine tools. Design and dimensions

GOST 16159-70: Quick-change chucks with locating pin for broaches of horizontal broaching machine tools. Design and dimensions

GOST 16160-70: Chucks for splined broaches of horizontal broaching machine tools. Design and dimensions

GOST 16181-82: Diamond grinding wheels

GOST 16211-70: Centre cone arbors. Design and dimensions

GOST 16225-81: Shank cutters for machining light alloys. Types and dimensions

GOST 16463-2016: Solid carbide keyway cutters. Specifications

GOST 1672-2016: Solid machine reamers. Types and dimensions

GOST 1672-80: Solid machine reamers. Types, parameters and dimensions

GOST 17025-71: End mills with cylindrical shank. Design and dimensions

GOST 17026-71: End mills with tapered shank. Design and dimensions

GOST 17385-72: Guide pins of plastic moulds and die casting dies. Construction and dimensions

GOST 17386-72: Step-shaped guide pins of plastics moulds and die casting dies. Construction and dimensions

GOST 17528-72: Spindle cam arbors. Design and dimensions

GOST 17574-72: Multiball hard differential rollers by diameters from 40 to 300 mm for dimension-finishing of openings of machine components by pressure. Technical requirements

GOST 17756-72: Threaded plug-gauges with inserts with full-form of thread of diameters from 1 to 100 mm. Design and basic dimensions

GOST 17757-72: Threaded plug-gauges with inserts with incomplete form of thread of diameters from 1 to 100 mm. Design and basic dimensions

GOST 17927-72: Machine taps with staggered teeth for machining of stainless and heat-resisting steels. Design and dimensions

GOST 17928-72: Machine taps with staggered tooth's for machining of light alloys. Design and dimensions

GOST 17929-72: Nut taps with staggered teeth for machining of stainless and heat-resisting steels. Design and dimensions

GOST 17930-72: Machine taps with shortened flutes for machining of light alloys. Design and dimensions

GOST 17931-72: Machine taps with shortened flutes. Design and dimensions

GOST 17932-72: Machine taps with screw flutes for light alloys. Design and dimensions

GOST 17933-72: Machine taps with screw flutes. Design and dimensions

GOST 18121-2017: Sweep boilers. Dimensions

GOST 18121-72: Machine bridge reamers. Dimensions

GOST 18259-72: Thrust centres with cone 1:10 and 1:7. Design and dimensions

GOST 18260-72: Thrust centres with screwed-off nut and cone 1:10 and 1:7. Design and dimensions

GOST 18372-73: Carbide end mills. Specifications

GOST 18437-73: Notched straight-side cone centre arbors. Design and dimensions

GOST 18438-73: Notched straight-side centre arbors. Design and dimensions

GOST 18439-73: Notched straight-side centre arbors with press fit of jobs. Design and dimensions

GOST 18440-73: Notched straight side sprindle arbors. Design and dimensions

GOST 18718-73: Guide posts for changeable sheet stamping dies. Construction and dimensions

GOST 18719-73: Guide posts with shoulders for changeable sheet stamping dies. Construction and dimensions

GOST 18839-73: Machine-hand non-shaving taps. Design and dimensions

GOST 18840-73: Nut non-shaving taps. Design and dimensions

GOST 18841-73: Nut non-shaving taps with curved shanks. Design and dimensions

GOST 18922-73: Screw plug-gauges with full-form inserts for pipe cylindrical threads from 1/16'up to 4' nominal diameter. Construction and basic sizes

GOST 18923-73: Screw plug-gauges with truncated form inserts for pipe cylindrical threads from 1/16 'up to 4' nominal diameter. Construction and basic sizes

GOST 18934-73: Solid carbide-tipped spherical bulb-type end milling cutters for cutting hardworking steels and alloys. Design and dimensions

GOST 18935-73: Solid carbide-tipped ellipsoidal spherical end milling cutters for cutting hardworking steels and alloys. Design and dimensions

GOST 18936-73: Solid carbide-tipped spherical cylindrical end milling cutters for cutting hardworking steels and alloys. Design and dimensions

GOST 18937-73: Solid carbide-tipped cylindrical end milling cutters for cutting hardworking steels and alloys. Design and dimensions

GOST 18938-73: Solid carbide-tipped conical end milling cutters for cutting hardworking steels and alloys. Design and dimensions

GOST 18939-73: Elongated carbide-tipped spherical bulb-type and milling cutters for cutting hardworking steels and alloys. Design and dimensions

GOST 18940-73: Elongated carbide-tipped spherical ellipsoidal end milling cutters for cutting hardworking steels and alloys. Design and dimensions

GOST 18941-73: Elongated carbide-tipped spherical cylindrical end milling cutters for cutting hardworking steels and alloys. Design and dimensions

GOST 18942-73: Elongated carbide-tipped cylindrical end milling cutters for cutting hardworking steels and alloys. Design and dimensions

GOST 18943-73: Elongated carbide-tipped conical end milling cutters for cutting hardworking steels and alloys. Design and dimensions

GOST 18944-73: Spherical end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions

GOST 18945-73: Spherical ellipsoidal end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions

GOST 18946-73: Spherical cylindrical end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions

GOST 18947-73: Spherical conical end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions

GOST 18948-73: Cylindrical end milling cutters with carbide bits for cutting hardworking steels and alloys. Design and dimensions

GOST 19354-74: Shaft line flange joints. Construction and dimensions

GOST 19543-74: Twist drills with cylindrical shank for working of light alloys. Middle series. Design

GOST 19544-74: Twist drills with cylindrical shank for working of light alloys. Long series. Design

GOST 19545-74: Left twist drills with cylindrical shank for working of light alloys. Design

GOST 19546-74: Twist drills with taper shank for working of light alloys. Design

GOST 19547-74: Lengthened twist drills with taper shank for working of light alloys. Design

GOST 19879-74: Carbide tipped machine taps for pipe cylindrical thread. Specifications

GOST 2.109-73: Unified system for design documentation. Basic requirements for drawings

GOST 2015-84: Fixed plain gauges. Technical requirements

GOST 20364-74: Round broaches of variable cutting of diameters from 10 to 13 mm. Design and dimensions

GOST 20365-74: Broaches round of variable cutting of diameters from 14 to 90 mm. Design and dimensions

GOST 20539-75: End mills with solid carbide tips and with spiral carbide blades. Specifications

GOST 20694-75: Twist drills with straight shanks for hard to machine materials. Short series. Construction and dimensions

GOST 20695-75: Twist drills with straight shanks for hard to machine materials. Middle series. Construction and dimensions

GOST 20696-75: Twist drills with taper shanks for hard to machine materials. Short series. Construction and dimensions

GOST 20697-75: Twist drills with taper shanks for hard to machine materials. Middle series. Construction and dimensions

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 20925-75: Units of changeable press-moulds with low positioned loading chamber for moulding thermoset articles. Construction and dimensions

GOST 2105-75: Forged and swaged hooks. Technical requirements

GOST 21459-82: Removable guides for sheet stamping dies. Construction and dimensions

GOST 21579-76: Cylinder-chucking countersinks for machining parts from light alloys. Design and dimensions

GOST 21580-76: End countersinks with cylinder chucking for machining parts from light alloys. Design and dimensions

GOST 21581-76: Tapered countersinks for machining parts for light alloys. Design and dimensions

GOST 21582-76: End countersinks with taper chucking for machining parts from light alloys. Design and dimensions

GOST 22053-76: Woodcutting twist drills with centre and undercutters. Specifications

GOST 22057-76: Woodcutting twist drills. Technical conditions

GOST 22472-87: Dies for a sheet-metal stamping

GOST 22559-77: Shanks of press-moulds for pressure moulding of thermoset articles. Construction and dimensions

GOST 2323-76: Noses of grinding spindles with outside taper. Coupling dimensions

GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage

GOST 24644-81: Spindle noses and tool shanks of drilling, boring and milling machines. Dimensions. Technical requirements

GOST 24818-81: Broaches combined for b-slitting holes with straight side profile and centring at outside diameter, alternatives. Design and dimensions

GOST 24819-81: Broaches combined for 6-slitting holes with straight side profile and centring at outside diameter, alternatives. Double driven. Design and dimensions

GOST 24820-81: Broaches combined for 8-slitting holes with straight side profile and centring at outside diameter, alternatives. Design and dimensions

GOST 24821-81: Broaches combined for 8-slitting holes with straight side profile and centring at outside diameter, alternatives. Double driven. Design and dimensions

GOST 24822-81: Broaches combined for 10-slitting holes with straight side profile and centring at outside diameter, alternatives. Design and dimension

GOST 24823-81: Broaches combined for 10-slitting holes with straight side profile and centring at outside diameter, alternatives. Double driven. Design and dimensions

GOST 24959-81: Gauges for splinted joints

GOST 25157-82: Broaches with diameter 12 and 14 mm for slitting holes with involute profile and centring at outside diameter with module 1 mm double driven. Construction and dimensions

GOST 25158-82: Broaches with diameter from 15 to 90 mm for slitting holes with involute profile and centring at outside diameter with module from 1 to 2,5 mm. Construction and dimensions

GOST 25159-82: Broaches with diameter from 15 to 90 mm for slitting holes with involute profile and centring at outside diameter with module from 1 to 2,5 mm, double driven. Construction and dimensions

GOST 25160-82: Broaches with diameter from 45 to 90 mm for slitting holes with involute profile and centring at outside diameter with module from 3 to 5 mm. Construction and dimensions

GOST 25161-82: Broaches with diameter from 70 to 90 mm for slitting holes with involute profile and centring at outside diameter with module from 3,5 to 5 mm. Double driven. Construction and dimensions

GOST 25557-2006: Machine tools tapers. Basic dimensions

GOST 25557-2016: Mashine tools tapers. Basic dimensions

GOST 25557-82: Machine tool tapers. Basic dimensions

GOST 25827-2014: The tool shanks tapered at 7:24 for the manual and automatic tool changers. Types A, AD, AF, U, UD, UF, J, JD and JF. Dimensions and notation

GOST 25969-83: Combined alternative broaches for 6 slitting holes with straight side profile and centring at inside diameter. Design and dimensions

GOST 25971-83: Combined alternative broaches for 8 slitting holes with straight side profile and centring at internal diameter. Design and dimensions

GOST 25972-83: Combined alternatives double driven broaches for 8 slitting holes with straight side profile and centring at internal diameter. Design and dimensions

GOST 25973-83: Combined alternatives broaches for 10 slitting holes with straight side profile and centring at internal diameter. Design and dimensions

GOST 25974-83: Combined alternatives double driven broaches for 10 slitting holes with straight side profile and centring at internal diameter. Design and dimensions

GOST 26258-87: Counterbores designed for working bearing surfaces under fastenings. Specifications

GOST 26479-85: Double-pass square broaches for holes with sides from 12,5 to 60 mm. Design and dimensions

GOST 26480-85: Square broaches for holes with sides from 25 to 41 mm. Design and dimensions

GOST 27358-87: Press moulds for manufacturing of plastic items

GOST 28044-89: Internal broaches for straight splines based at internal diameter one pass combined type. Construction

GOST 28045-89: Internal broaches for straight splines based at internal diameter double pass combined type. Construction

GOST 28046-89: Internal broaches for straight splines based at internal diameter three pass combined type. Construction

GOST 28047-89: Internal broaches for straight splines based at internal diameter four pass combined type. Construction

GOST 28048-89: Broaches with diameter from 50 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 1,5 to 2,5 mm. Construction

GOST 28049-89: Broaches with diameter from 90 to 120 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 2,5 mm. Construction

GOST 28050-89: Broaches with diameter from 55 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 3 to 5 mm. Construction

GOST 28051-89: Broaches with diameter from 70 to 130 mm for slitting holes with involute profile with round tail and centring at outside diameter with module from 3 to 5 mm. Construction

GOST 28319-89: Subland twist drills for holes to screw with fillister head. Basic dimensions

GOST 28320-89: Subland twist drills for holes prior to tapping screw thread. Basic dimensions

GOST 28321-89: Cemented carbide tipped machine reamers. Types, parameters and dimensions

GOST 28442-90: Broaches for cylindrical, slitting and polyhedral profile holes. Specifications

GOST 29118-91: Dovetail slot single angle milling cutters. Types and dimensions

GOST 29129-91: Tapered die sinking cutters with parallel shanks. Dimensions

GOST 30051-93: Spline grinding machines. Basic dimensions. Standards of accuracy

GOST 31.1066.01-85: Attachments for metall-cutting machine tools. Central readjustable mandrels with corrugated bushings for precision machining. Basic parameters and dimensions

GOST 31.1066.02-85: Attachments for metall-cutting machine tools. Mandrels with split collets for precision machining. Basic parameters and dimensions

GOST 31.1066.03-97: Central arbors for exact operations

GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines

GOST 31.121.42-84: Elements and assemblies of universal built-up and re-adjustable equipment for metal-cutting machines

GOST 3231-71: Carbide tipped counterbores. Design and dimensions

GOST 32405-2013: Solid hardmetal end mills. Specifications

GOST 32831-2014: End mills with cylindrical, Morse taper and 7:24 taper shanks. Dimensions

GOST 4010-77: Twist drils with parallel shanks. Short series. Basic dimensions

GOST 6226-71: 1:16 Taper thread reamers. Design and dimensions

GOST 6227-80: Taper-thread taps

GOST 6396-78: Carbide-tipped keyway milling cutters. Specifications

GOST 6951-71: Nut taps with curved shanks. Design and dimensions

GOST 7063-72: T-slot cutters. Specifications

GOST 7722-77: Cylindrical hands reamers. Design and dimensions

GOST 8838-81: Shaftline conical joints. Types, construction and dimensions

GOST 886-77: Twist drills with parallel shanks. Long series. Basic dimensions

GOST 9140-2015: Slot drills with cylindrical, Morse taper and 7:24 taper shanks. Specifications

GOST 9140-78: Keyway cutters. Specifications

GOST 9953-82: Shortened tapers of tools. Basic dimensions

GOST R 50035-92: Combined broaches with diameter from 50 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 1,5 to 2,5 mm. Construction

GOST R 50036-92: Combined broaches with diameter from 90 to 120 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 2,5 mm. Construction

GOST R 50037-92: Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 3 to 4 mm. Construction

GOST R 50038-92: Combined broaches with diameter from 55 to 130 mm for slitting holes with involute profile with wind round tail and centring at outside diameter with module from 3 to 5. Construction

GOST R 50572-93: End mills and keyway cutters with 7/24 taper shanks. Dimensions

GOST R 52966-2008: Subland twist drills for holes prior to tapping screw threads. Basic dimensions

GOST R 52967-2008: Dovetail slot single angle milling cutters. Dimensions

GOST R 53002-2008: End mills with cylindrical, Morse taper and 7:24 taper shanks. Dimensions

GOST R 53003-2008: Slot drills with cylindrical, Morse taper and 7:24 taper shanks. Specifications

GOST R 53004-2008: T-slot cutters. Specifications

GOST R 53412-2009: Woodruff keyseat cutters. Specifications

GOST R 53413-2009: End mills with brazed helical hard metal tips. Basic dimensions

GOST R 53413-2022: End mills with a cylindrical shank equipped with helical carbide inserts. Main dimensions

GOST R 53414-2009: End mills with brazed helical hard metal tips with 7:24 taper shank. Basic dimensions

GOST R 53414-2022: End mills with 7:24 taper shank, equipped with helical carbide inserts. Main dimensions

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 70533-2022: Key cutters equipped with tungsten carbide plates. Specifications

GOST R 71396-2024: Automotive vehicles. Fasteners. Hexagonal head set screws with long threaded stud. Technical requirements

MI 2130-91: Recommendation. State system for ensuring uniformity of measurements. Universal involutes of firms Zeiss Jena, Maag, Klingelnberg, Hofler, Osaka Seimitsu Kikai and Hamai. Verification Method

OST 26-07-262-77: Studs, bolts, screws, nuts for piping fittings. General technical requirements (restriction as per GOST 20700-75, GOST 1759-70, GOST 18126-72).

OST 26-2043-91: Bolts, studs, nuts and washers for flanged joints. Technical requirements

OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.

OTU 80: General specifications for the operation and repair of piston and plunger pumps

R 50-54-30-87: Recommendations. Calculations and tests of strength. Test methods for contact fatigue

RD 22-207-88: Lifting machines. General requirements and production standards

RD 34 02.028-2007: Technical rules. Mechanical equipment and special steel structures for hydraulic structures. Manufacturing, installation and acceptance.

RD 36-62-00: Hoisting equipment. General technical requirements.

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English
Price: $201.00
imgalt
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English
Price: $398.00
imgalt
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English
Price: $98.48
imgalt
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English
Price: $295.00
imgalt
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English
Price: $299.00
imgalt
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $282.00
imgalt
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English
Price: $96.00
imgalt
Dependability in technics. Terms and definitions
Language: English
Price: $233.00
imgalt
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English
Price: $542.00
imgalt
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English
Price: $205.00
imgalt
Rails of types P38 and P42. Technical conditions
Language: English
Price: $109.00
imgalt
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English
Price: $282.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!