GOST R 53673-2009

ГОСТ Р 53673-2009

Pipeline valves. Butterfly wicket valves. General specifications

Арматура трубопроводная. Затворы дисковые. Общие технические условия

Status: Not effective - Canceled. Information on the registration of 449-st dated 05/30/2016 (the official website of Rosstandart), see IUS 11-2016

This standard applies to locking, locking and regulating and regulating butterfly valves for a nominal pressure of not more than PN 250 with a manual drive, electric, pneumatic and hydraulic actuators, designed to work on liquid and gaseous media. The standard does not apply to butterfly valves made from non-metallic materials. The standard can be used for certification

Настоящий стандарт распространяется на запорные, запорно-регулирующие и регулирующие дисковые затворы на номинальное давление не более PN 250 с ручным приводом, электро-, пневмо- и гидроприводом, предназначенные для работы на жидких и газообразных средах. Стандарт не распространяется на дисковые затворы из неметаллических материалов. Стандарт может быть использован для сертификации

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 28

Approved: Federal Agency for Technical Regulation and Metrology, 12/15/2009

SKU: RUSS58321

Price: $229.89




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 2. Standards for general specifications » 2.2 Control valves »

Standards for pipe fittings (TPA) » 2. Standards for general specifications » 2.1 Stop valves » 2.1.4 Disk locks »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipe fittings » 23.060.30 Latches »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipeline valves » 23.060.30 Latches »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G18 Fittings and pipeline connections »


The Document References:

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers

GOST 112-78: Meteorological glass thermometers

GOST 11427-75: Blacksmith's hand and hammer tools. Round split swages. Design and dimensions

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.1.010-76: Explosion safety. General requirements

GOST 12521-89: Butterfly valves. Basic parameters

GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions

GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions

GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions

GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions

GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions

GOST 13837-79: General purpose dynamometers

GOST 14192-96: Cargo marking

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 166-89: Vernier callipers. Specifications

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 18322-78: Equipment maintenance and repair system. Terms and definitions

GOST 2.427-75: Unified system for design documentation. Rules for making working drawings of sprockets for round-link chain wheels

GOST 2.602-95: Unified system for design documentation. Repair documents

GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements

GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements

GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

GOST 24297-87: Input inspection of products. General provisions.

GOST 24642-81: Basic norms of interchangeability. Tolerances of form and position. Basic terms and definitions

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 25923-89: Butterfly control valves. Basic parameters

GOST 26304-84: Industrial pipeline valves supplied

GOST 26349-84: Tube connections and fittings. Nominal pressures. Series

GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 29329-92: Balance for static weightings

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications

GOST 30893.2-2002: Basic norms of interchangeability. General tolerances. Tolerances of form and position for features without individual tolerance indications

GOST 3242-79: Welded joints

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 6359-75: Meteorological barographs of aneroid type. Specifications

GOST 6507-90: Micrometers. Specifications

GOST 6527-68: Female ends with pipe cylindrical thread. Dimensions

GOST 7062-90: Carbon and alloyed steel forgings fabricated by press forging. Allowances and tolerances

GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps

GOST 7829-70: Carbon and alloyed steel forgings fabricated by hammer forging. Allowances and tolerances

GOST 8427-75: Longitudinally turning automatic machines. Basic dimensions

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 52720-2007: Pipeline valves. Terms and definitions

GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting

GOST R 53402-2009: Pipeline valves. Methods of control and testing

GOST R 53464-2009: Metal and alloy castings. Dimensions and mass tolerances and machining allowances

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

GOST R ISO 8573-1-2005: Compressed air. Part 1. Contaminants and purity classes

MU 2.1.5.1183-03: Sanitary and Epidemiological Surveillance over the Water Use in Industrial Water Supply Systems

PB 03-585-03: Process Pipelines Design and Safe Operation Rules

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PR 50.2.006-94: Procedure for calibration of measurement equipment

SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control

ST TsKBA 028-2007: Pipe fittings. Periodic testing. General requirements

ST TsKBA 041-2008: Pipe fittings. Input control of materials, semi-finished products and components

Federal Law 184-FZ: About technical regulation

The Document is Referenced By:

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 33257-2015: Pipeline valves. Methods of control and testing

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

ST TsKBA 007-2004: Pipe fittings. Organizing and conducting an industrial safety review of pipeline valves operated at hazardous production facilities

ST TsKBA 024-2006: Pipe fittings. Determination of residual life and reliability indicators

Customers Who Viewed This Item Also Viewed:

Locomotive and motor rolling stock. Requirements of fire safety
Language: English
Price: $321.75
Unified system of design documentation. Operational documents
Language: English
Price: $610.13
Unified system of design documentation. Rules for the implementation of operational documents
Language: English
Price: $752.72
Noise. Admissible levels of noise in houses and public buildings
Language: English
Price: $35.64
System of building design document. Pipelines. Symbols for presentation
Language: English
Price: $134.64
Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation
Language: English
Price: $543.51
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $75.24
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
Machines for the pulp and paper industry
Language: English
Price: $211.86
Unified system for design documentation. Rules for making exploitative documents
Language: English
Price: $187.11
Electrical insulation system. Thermal evalution and classification
Language: English
Price: $236.61
Loads and impacts
Language: English
Price: $338.40
Direct-acting safety valves. General specifications
Language: English
Price: $549.45
Cable lines. Circuit integrity under fire. Test method
Language: English
Price: $75.24
Technical regulations of Customs Union. On the safety of agricultural and forestry tractors and trailers
Language: English
Price: $98.40
Seamless cold-deformed pipes from alloys based on titanium. Specifications
Language: English
Price: $147.44
Soils. Field test method by dynamic sounding
Language: English
Price: $254.14
Flame arrestors and spark arrestors. General technical requirements. Test methods
Language: English
Price: $129.69
Manufacturing of medicinal products. Processing equipment for manufacturing of solid dosage forms. General requirements
Language: English
Price: $158.40
Production conditions analysis for product attestation
Language: English
Price: $285.18

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!