GOST 10390-86
ГОСТ 10390-86
|
|
Electrical equipment for voltages 3 kV and higher. Test methods of electric strength of external insulation in conditions of contamination
Электрооборудование на напряжение свыше 3 кВ. Методы испытаний внешней изоляции в загрязненном состоянии
Status: Not effective - Superseded. Registration information 675-st dated 06/23/2016 (official website of Rosstandart); IUS 12-2016
The standard applies to electrical equipment designed to work in outdoor installations of alternating current of 50 Hz frequency and direct current voltage classes of 3 kV and above: transformers (power, current and voltage), reactors, devices, capacitors, cable terminations, and also insulators establishes general methods for testing external insulation in a contaminated state when exposed to AC or DC voltage or switching pulses for a long time. The standard does not apply to insulators whose surface is covered with semiconducting glaze or hydrophobic pastes, as well as valve-type arresters and surge arresters.
Стандарт распространяется на электрооборудование, предназначенное для работы в наружных установках переменного тока частоты 50 Гц и постоянного тока классов напряжения 3 кВ и выше: трансформаторы (силовые, тока и напряжения), реакторы, аппараты, конденсаторы, кабельные концевые муфты, а также изоляторы, и устанавливает общие методы испытаний внешней изоляции в загрязненном состоянии при длительном воздействии переменного или постоянного напряжения или коммутационных импульсах. Стандарт не распространяется на изоляторы, поверхность которых покрыта полупроводящей глазурью или гидрофобными пастами, а также на вентильные разрядники и ограничители перенапряжений.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
6/26/1986
SKU: RUSS58355
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.10 Operation of electrical installations, electrical equipment and power tools »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.1 Electric machines, electrical equipment and materials »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E0 General rules and regulations for electrical and heat engineering »
E09 Test methods. Packaging. Marking »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Control methods (testing, analysis, measurements) »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Transformers and transformer equipment, high-voltage equipment, power conversion equipment, power semiconductor devices, detectors of nuclear and neutron radiation, chemotronics (electrochemical information converters) »
The Document is Replaced With:
GOST 10390-2015: Electrical equipment for voltages 3 kV and higher. Test methods of electric strength of external insulation in conditions of contamination
As a Replacement Of:
GOST 10390-71: Electrical equipment of high voltage. Methods of tests for the electrical strength of external insulation under contamination conditions
The Document References:
GOST 1516.2-97: Electrical equipment and installations for a.c. voltage 3 kV and higher. General methods of dielectric tests
GOST 17512-82: Electric equipment and installations for 3 kV and higher. Measuring methods during high - voltage tests
The Document is Referenced By:
GOST 26093-84: Ceramic insulators. Test methods
GOST 28856-90: Line suspension polymeric rod insulators
GOST 689-90: Disconnectors and ground-wires for alternating current with voltage over 1 000 v
GOST 8608-79: Porcelain pin support insulators for voltage above 1000 V. General specifications
GOST 8608-96: Porcelain pin support insulators for voltage above 1000 V. General specifications
GOST R 51203-98: Rod porcelain insulators for contact net of railways. General specifications
GOST R 51204-98: Rod polymeric insulators for contact net of railways. General specifications
GOST R 51728-2001: Stick insulators of polymeric material of tram and trolleybus contact nets to be used in polluted environmental conditions. General specifications
GOST R 52034-2003: Ceramic support insulators for voltage over 1000 V. General specifications
GOST R 52034-2008: Ceramic support insulators for voltage over 1000 V. General specifications
GOST R 52082-2003: Support polymeric outdoor insulators for voltage 6-220 kV. General specifications
GOST R 53735.5-2009: Surge arresters without gaps and non-linear resistor type gapped surge arresters for a.c. electrical installations for voltages from 3 to 750 kV. Part 5. Selection and application recommendations
GOST R 55189-2012: Line suspension polymeric rod insulators. General specifications
GOST R 55195-2012: Electrical equipment and installations for a.c. voltages from 1 up to 750 kV. Requirements for dielectric strength of insulation
GOST R 55648-2013: Insulators for contact net of railways. General specifications
GOST R 55649-2013: Section insulation for catenary of railways. Specifications
GOST R 56735-2015: Selection and dimensioning of high-voltage insulators intended for use in polluted conditions. Part 1. Definitions, information and general principles
GOST R 56736-2015: Selection and dimensioning of high-voltage insulators intended for use in polluted conditions. Part 2. Ceramic and glass insulators for a.c. systems
RD 34.20.173-86: Guidelines for mapping isolation levels of overhead lines and switchgears in areas with a polluted atmosphere
RD 34.51.301: Guidelines for the Determination of Discharge Characteristics of Insulators Exposed to Pollution Occurring Under Natural Conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
