imgalt

GOST 17745-90

ГОСТ 17745-90

Steels and alloys. Methods for determination of gases

Стали и сплавы. Методы определения газов

Status: Effective - Supersedes. IUS 8-1990 The limitation of effectiveness period has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)

The standard establishes a method for visually determining the color of petroleum products, including lubricating oils, furnace fuels, fuel oil, and petroleum waxes. The standard does not address all of the safety concerns associated with its use, if they exist. The user of the standard is responsible for ensuring safety, protecting human health and determining the limits of applicability of the standard prior to its use.

Стандарт устанавливает метод восстановительного плавления в вакууме или в потоке инертного газа-носителя для определения кислорода (при массовой доле от 0,0005 до 0,2%), азота (при массовой доле от 0,0005 до 0,8%) и водорода (при массовой доле от 0,00005 до 0,01%) и метод нагрева или плавления в вакууме или в потоке инертного газа-носителя для определения водорода (при массовой доле от 0,00005 до 0,01%) в сталях и сплавах на основе железа, никеля, кобальта, железо-никеля.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Product Quality and Standards Management, 4/27/1990

SKU: RUSS58371

Price: $280.00

English keywords: become; gas detection; metallurgy;


imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.1 Ferrous metals »

ISO classifier » 77 METALLURGY » 77.080 Ferrous metals » 77.080.20 Steel »

National standards » 77 METALLURGY » 77.080 Ferrous metals » 77.080.20 Steel »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V09 Test methods. Packaging. Marking »

National Standards for OKSTU » CAST IRON, FERRO ALLOYS, STEEL » Control methods (testing, analysis, measurements) »


As a Replacement Of:

GOST 17745-72: Steel and alloys. Method for the determination of the content of gases

The Document References:

GOST 1012-72: Aviation petrol

GOST 10157-79: Gaseous and liquid argon. Specifications

GOST 11680-76: Cotton fabrics coarse Calico group. Specification

GOST 16539-79: Reagents. Cupric oxide. Specifications

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 20288-74: Reagents. Carbon tetrachloride. Specifications

GOST 28437-90: End mills with mechanically clamped multi-edged insert tips

GOST 3022-80: Technical hydrogen. Specification

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 849-70: Primary nickel. Specifications

GOST 849-97: Primary nickel. Specifications

GOST 860-75: Tin. Specifications

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

The Document is Referenced By:

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications

GOST 10791-2004: All-rolled wheels. Specifications

GOST 10791-2011: All-rolled wheels. Specifications

GOST 10994-74: Precision alloys. Grades.

GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications

GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications

GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications

GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications

GOST 19281-2014: High strength rolled steel. General specification

GOST 23705-79: Hot-rolled and forged high-temperature alloy bars

GOST 27772-2015: Structural steel structure rolled products. General specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 28393-89: PM bars and strips of high-speed steel. General specifications

GOST 31443-2012: Steel pipes for crafts pipelines. Specifications

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications

GOST 33228-2015: Steel welded pipes for general purposes. Specifications

GOST 34458-2018: Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications

GOST 34636-2020: Pipe billet. General specifications

GOST 380-2005: Common quality carbon steel. Grades

GOST 380-88: Common quality carbon steel. Grades

GOST 380-94: Normal quality carbon steel

GOST 398-2010: Rough tyres for railway rolling stock. Specifications

GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4728-2010: Axle billets for railway rolling stock. Specifications

GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 535-88: Common quality carbon bar and shaped sections. General specifications

GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5876-82: Types P18 and P24 narrow-gauge railway rails

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 801-2022: Rolled bearing steel. Technical conditions

GOST 801-78: Bearing steel. Specifications

GOST R 51045-2014: Rails of ways technological railways transport. General specifications

GOST R 51685-2000: Railway rails. General specifications.

GOST R 51685-2013: Railway rails. General specifications.

GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications

GOST R 53932-2010: Tube billet. General specifications

GOST R 54908-2012: Heat-resistant steel metal products. Specifications

GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 55497-2013: Check railway rails. Specifications

GOST R 55498-2013: Rolled wheel centres for railway rolling stock. Technical specifications

GOST R 55820-2013: Switch and crossing rails. Specifications

GOST R 56299-2014: Rolled products from bearing steel. Specifications

GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications

GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications

GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications

MI 2422-97: State system for ensuring uniformity of measurements. Gas analyzer in solid materials "Eltra ONH". Method of verification

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

OST 36-60-81: Welding at installation of steel building constructions. Main provisions.

OST 48-184-81: Solder alloys for soldering of hard-alloy metal-cutting tool. Specifications.

PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures

ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification

TU 14-2-767-88: Hot-rolled steel strip with improved quality. Technical conditions

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English
Price: $79.00
imgalt
Armour clothes. Classification and general technical requirements
Language: English
Price: $189.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Food products. Methods for detection and quantity determination of coliformes
Language: English
Price: $169.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Hotels design
Language: English
Price: $1,698.24
imgalt
Railroad rails. General specifications
Language: English
Price: $1,813.00
imgalt
Potassium chloride
Language: English
Price: $159.00
imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!