GOST 18895-97
ГОСТ 18895-97
|
|
Steel. Method of photoelectric spectral analysis
Сталь. Метод фотоэлектрического спектрального анализа
Status: Effective - Supersedes. IUS 12-1997
The standard establishes the forms and rules for the design of the following statements for special purposes used in the conditions of technological preparation and production management and developed using various design methods:
Стандарт устанавливает фотоэлектрический спектральный метод определения в стали массовой доли элементов, %: углерода от 0,010 до 2,0; серы от 0,002 до 0,20; фосфора от 0,002 до 0,20; кремния от 0,010 до 2,5; марганца от 0,050 до 5,0; хрома от 0,010 до 10,0; никеля от 0,010 до 10,0; кобальта от 0,010 до 5,0; меди от 0,010 до 2,0; алюминия от 0,005 до 2,0; мышьяка от 0,005 до 0,20; молибдена от 0,010 до 5,0; вольфрама от 0,020 до 5,0; ванадия от 0,005 до 5,0; титана от 0,005 до 2,0; ниобия от 0,010 до 2,0; бора от 0,001 до 0,10; циркония от 0,005 до 0,50.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Russian Federation for Standardization, Metrology and Certification,
9/23/1997
SKU: RUSS58375
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.1 Ferrous metals »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V39 Test methods. Packaging. Marking »
National Standards for OKSTU »
CAST IRON, FERRO ALLOYS, STEEL »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 18895-81: Steel. Method of photoelectric spectral analysis
The Document References:
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 18895-81: Steel. Method of photoelectric spectral analysis
GOST 21963-2002: Grinding wheels for cutting-off. Specifications
GOST 21963-82: Cutoff wheels
GOST 2424-83: Grinding wheels
GOST 6456-82: Abrasive paper
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8.315-97: Standard samples for composition and properties of substances and materials
GOST 859-2001: Copper. Grades
GOST 859-78: Copper. Grades
The Document is Referenced By:
GOST 34468-2018: Center plates for freight cars of 1520 mm track gauge railways. General specifications
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications
GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications
GOST 10791-2004: All-rolled wheels. Specifications
GOST 10791-2011: All-rolled wheels. Specifications
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel
GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel
GOST 11474-76: Bent-steel sections. Specifications
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications
GOST 14959-79: Spring carbon and alloy steel bars. Specifications
GOST 1577-2022: Heavy-gauge plates and wide strips of structural quality steel. Technical specifications
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications
GOST 19281-2014: High strength rolled steel. General specification
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
GOST 23270-89: Tube-billets for machining
GOST 24244-2018: Сold rolled low carbon steel sheet for enameling. Specifications
GOST 27772-2015: Structural steel structure rolled products. General specifications
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 2787-2019: Ferrous metals are secondary. General specifications
GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications
GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications
GOST 31443-2012: Steel pipes for crafts pipelines. Specifications
GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST 31825-2012: Sucker rods, mouth stocks and couplings for them. Specifications
GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications
GOST 32409-2013: Spring anchors to railway rails. Technical specification
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications
GOST 33228-2015: Steel welded pipes for general purposes. Specifications
GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C
GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements
GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications
GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications
GOST 34450-2018: Details and assembly units of coupling and automatic coupling devices of railway rolling stock. Test methods
GOST 34458-2018: Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
GOST 34636-2020: Pipe billet. General specifications
GOST 380-2005: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 398-2010: Rough tyres for railway rolling stock. Specifications
GOST 398-96: Carbon steel tires for broad gauge railroads and subway rolling-stock
GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions
GOST 4491-2016: Cast centers of wheels for railway rolling stock. General specifications
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 4543-71: Structural alloyed steel
GOST 4728-2010: Axle billets for railway rolling stock. Specifications
GOST 4728-96: Axle billets for the railway rolling stock of 1520 mm gauge
GOST 4781-85: Hot-rolled steel shapes for sheet piles. Specifications
GOST 5267.0-90: Hot-rolled sections for car building. General specifications
GOST 5286-2022: Screw-in steel pipe clamps for drill pipes. General technical requirements
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5468-88: Needle wire
GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5521-93: Shipbuilding rolled steel
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 7370-2015: Railway frogs. Specifications
GOST 7524-2015: Steel grinding balls for ball mills. Specifications.
GOST 801-2022: Rolled bearing steel. Technical conditions
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST R 50.04.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for the steels and alloys melting and casting procedures
GOST R 51045-2014: Rails of ways technological railways transport. General specifications
GOST R 51045-97: Steel rails of PП50, PП65 and PП75 types for industrial tracks. General specifications
GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications
GOST R 51685-2000: Railway rails. General specifications.
GOST R 51685-2013: Railway rails. General specifications.
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications
GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications
GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications
GOST R 53866-2010: Crane rails. Specifications
GOST R 53932-2010: Tube billet. General specifications
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54908-2012: Heat-resistant steel metal products. Specifications
GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications
GOST R 54929-2012: Steel welded pipes for general purposes. Specifications
GOST R 55185-2012: Parts and assembly units of coupler and automatic coupler devices of railway rolling stock. Test methods
GOST R 55374-2012: Alloyed structural rolled steel for bridge building. General specifications
GOST R 55497-2013: Check railway rails. Specifications
GOST R 55498-2013: Rolled wheel centres for railway rolling stock. Technical specifications
GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements
GOST R 55820-2013: Switch and crossing rails. Specifications
GOST R 55941-2014: Grooved rails. Specifications
GOST R 56299-2014: Rolled products from bearing steel. Specifications
GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
GOST R 58389-2019: Bent steel sheet profiles with trapezoidal corrugations for steel-reinforced concrete structures. Technical specifications
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
GOST R 70731.4-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of 08Х18Н10Т austenitic class steel.
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
ODM 218.4.002-2008: Guidelines for monitoring the status of existing bridge structures
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.020.03-82: Stamped billets of turbine and compressor blades made of corrosion-resistant and heat-resistant steel. General Specifications. (2010 edition, including 3 amendments)
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 108.961.04-80: Castings of carbon and alloy steel, nickel-base alloys for components of stationary steam turbines and compressors. Specifications.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
OST 3-98-80: Constructional and spring refining steel. Technical requirements.
PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels
PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
ST CKBA 125-2020: Pipe fittings. Types of control and testing
ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions
TU 1310-043-38948552-2017: Hot-deformed seamless tubes mechanically machined from corrosion-resistant steel 08X18H10T
TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC
TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines
TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions
TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions
TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions
TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines
TU 1468-010-593377520-2003: Seamless steel welded joints for pipelines, of increased operational reliability, intended for the field construction of OAO TNK
TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.