GOST 11701-84
ГОСТ 11701-84
|
|
Metals. Methods of tensile testing of thin sheets and strips
Металлы. Методы испытаний на растяжение тонких листов и лент
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard establishes methods for static tensile testing of thin sheets and tapes of ferrous and non-ferrous metals with a thickness of up to 3.0 mm for determination at a temperature (20 15
Стандарт устанавливает методы статических испытаний на растяжение тонких листов и лент из черных и цветных металлов толщиной до 3,0 мм для определения при температуре (20 +15/-10) град. С характеристик механических свойств: предела упругости; предела текучести физического; предела текучести условного; временного сопротивления; относительного равномерного удлинения; относительного удлинения после разрыва.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
7/17/1984
SKU: RUSS58543
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.2 Testing of manufacturing products »
ISO classifier »
77 METALLURGY »
77.040 Metal Testing »
77.040.10 Mechanical testing of metals »
National standards »
77 METALLURGY »
77.040 Metal Testing »
77.040.10 Mechanical testing of metals »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V0 General rules and regulations on metallurgy »
V09 Test methods. Packaging. Marking »
National Standards for OKSTU »
CAST IRON, FERRO ALLOYS, STEEL »
Control methods (testing, analysis, measurements) »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
Control methods (testing, analysis, measurements) »
National Standards for OKSTU »
RAW MATERIALS OF NON-FERROUS METALS, NON-FERROUS METALS AND THEIR ALLOYS »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 11701-66: Metals. The method of tensile testing of thin sheets and tapes
The Document References:
GOST 1497-84: Metals. Methods of tension test
The Document is Referenced By:
GOST 1018-2015: Aluminium, copper, brass and cupronickel strips for capsules. Specifications
GOST 1018-77: Bands aluminium, copper, brass and cupronikel for capsules. Specifications
GOST 10234-77: Moderate strength flattened
GOST 1048-2016: Strips of aluminium bronze for springs. Specifications
GOST 1048-79: Strips of aluminium bronze for springs. Specifications
GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel
GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications
GOST 1173-93: Copper strips. Specifications
GOST 12766.2-90: Strip from precision high electric resistance alloys
GOST 12766.5-90: Flattened strip of high electric resistance precision alloys
GOST 13726-78: Aluminium and aluminium alloys strips. Specifications
GOST 13726-97: Aluminium and aluminium alloys strips. Specifications
GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications
GOST 14117-85: Strip made from precision alloys for elastic elements
GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.
GOST 15146-69: Thermal-treated steel tape for musical instrument reeds. Specifications
GOST 15860-84: Steel welded cylinders for liquefied hydrocarbon gases at pressure up to 1.6 MPa.
GOST 15885-2018: Tin-zinc-lead bronze ribbons and strips. Specifications
GOST 15885-77: Tin-zinc-lead bronze ribbons and strips. Specifications
GOST 1595-90: Aluminium-manganese bronze strips and ribbons. Specifications
GOST 16358-2019: Copper tapes for coaxial trunk cables. Technical conditions
GOST 16358-79: Copper strips for coaxial main cables. Specifications
GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17066-80: Low-alloyed structural steel sheets and strips in coils. Marks and technical requirements
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 17380-2001: Carbon and low-alloy steel butt-welding fittings. General specifications
GOST 17380-83: Seamless welded steel pipeline components for Pn £ 10 MPa (£ 100 kgf/cm2). Specifications
GOST 17431-72: Powder material. M-MP alloy Sheets. Specifications
GOST 1761-2016: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 1761-92: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications
GOST 1789-2013: Beryllium bronze strips and tapes. Specifications
GOST 1789-70: Beryllium bronze strips and ribbons. Specifications
GOST 18846-2018: Zinc foil. Specifications
GOST 18846-73: Zinc foil. Specifications
GOST 21214-75: Means of packaging. Straps for lumber packages from steel band
GOST 21427.2-83: Cold-rolled isotropic electrical-sheet steel
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 2170-2016: Strips of nickel and nickel low alloys. Specifications
GOST 2170-73: Strips of nickel and nickel low alloys. Specifications
GOST 21996-76: Cold-rolled heat treated steel-cord belt
GOST 21997-76: Steel flattened strip of high strength
GOST 2205-2016: L-90 tapes and strips for plating. Specifications
GOST 2205-71: L-90 tapes and strips for plating. Specifications
GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications
GOST 2208-91: Brass strips for general use. Specifications
GOST 22178-76: Titanium and titanium alloys sheets. Specifications
GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications
GOST 22366-93: Iron-based sintered filler ribbon electrode
GOST 22635-77: Magnesium sheets. Technical requirements
GOST 2283-79: Cold-rolled tape made of tool steel and spring steel
GOST 2284-79: Cold-rolled carbon structural steel strip
GOST 23522-79: Cold-rolled strip for hack saws. Specifications
GOST 23886-91: Cadmium sheets and plates. Specifications
GOST 24244-2018: Сold rolled low carbon steel sheet for enameling. Specifications
GOST 24244-80: Cold-rolled soft thin sheet steel for enameled utensils
GOST 24982-81: Sheets of corrosion-resistant, heat-resistant and high-temperature alloys
GOST 27772-2015: Structural steel structure rolled products. General specifications
GOST 30415-96: Steel. Non-destructive testing of mechanical properties and microstructure of steel products by magnetic method
GOST 30599-2017: Light alloy wheels for pneumatic tyres. Technical requirements and test methods
GOST 30599-97: Light alloy wheels for pneumatic tyres. Specifications
GOST 31622-2012: Wrought stainless steel for surgical implants. Specifications
GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications
GOST 32603-2012: Three-layered metal panels with mineral wool insulation. Specifications
GOST 33212-2014: Non-grain oriented electrical steel strip. Specifications
GOST 3559-75: Steel band for armoring cables
GOST 3560-73: Sealing tepe
GOST 3836-83: Unalloyed thin sheet and band steel for electric engineering purposes
GOST 4442-2014: Bands and strips of lead brass. Specifications
GOST 4442-72: Strips and bands of lead brass. Specifications
GOST 4748-92: Silicon-manganese bronze strips and ribbons. Specifications
GOST 495-77: Copper sheets and ribbons. Specifications
GOST 495-92: Copper sheets and ribbons. Specifications
GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel
GOST 503-81: Cold-rolled low-carbon steel strip. Specifications
GOST 5063-2016: Ribbons of cupro-nikel alloys. Specifications
GOST 5063-73: Ribbons of cupro-nickel alloys. Specifications
GOST 5187-2003: Nickel silver, german silver and monel tapes. Specifications
GOST 5187-70: Nickel silver, german silver and monel tapes. Specifications
GOST 5189-2018: Constantan strips. Specifications
GOST 5189-75: Constantan strips. Specifications
GOST 5362-2018: Brass ribbons. Specifications
GOST 5362-78: Brass ribbons. Specifications
GOST 5497-80: Cold-rolled steel strip for saws of cotton-scrubbing machines
GOST 5521-86: Weldable steel for shipbuilding
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5638-2018: Copper roil foil for technical purposes. Specifications
GOST 5638-75: Copper roll foil for technical purposes. Specifications
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 8036-2013: Strips of brass Л90. Specifications
GOST 8036-79: Tombac strips. Specifications
GOST 808-70: Flattened steel strip for spiral rollers of bearings
GOST 8851-75: Steel strip of grades 11kp and 11yua
GOST 9.908-85: Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices
GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications
GOST 931-90: Brass sheets and strips. Specifications
GOST R 50.04.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for new material (base or welding)
GOST R 50511-93: Light alloy wheels for pneumatic tyres. Specifications
GOST R 51393-99: Corrosion-resistant steel cold rolled sheets and decks cold-shaped sections for carriage building. Specifications
GOST R 51394-99: Wrought stainless steel for surgical implants. Specifications
GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications
GOST R 52204-2004: Cold-rolled blackplate and tinplate. Specifications
GOST R 52246-2004: Hot-dip zinc-coated steel sheet. Specifications
GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications
GOST R 53845-2010: Steel rolled products. General rules of sampling, rough specimens and test pieces selection for mechanical and technological testing
GOST R 54152-2010: Tapes and strips from Л90 brass for plating. Specifications
GOST R 54160-2010: Ribbons from cuprum-nickel, nickel silver and monel. Specifications
GOST R 54480-2011: Non-grain oriented electrical steel strip. Specifications
GOST R 57910-2017: Materials for additive process. Control and tests methods
GOST R 58953-2020: Rolled sheet metal for folded roofs and facades. General specifications
GOST R 70352-2022: Fittings for overhead power lines up to 1 kV with self-supporting insulated wires. General specifications
GOST R 9.317-2010: Unified system of corrosion and ageing protection. Metallic coatings. Methods of measurement of ductility
OST 34-10-701-97: Parts of seamless steel welded pipelines on Rrab <2.2 MPa (22 kgf
OST 35-22-83: Pipe culverts made of corrugated metal intended for railroad and auto road. Specifications.
PNST 391-2020: High-strength steel packaging tape. Technical specifications
RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
TU 1468-001-17192736-01: Seamless welded bends made of alloy and high alloy steel
TU 1468-010-593377520-2003: Seamless steel welded joints for pipelines, of increased operational reliability, intended for the field construction of OAO TNK
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.