GOST 310.4-81
ГОСТ 310.4-81
|
|
Cements. Methods of tests of bending and compression strengths
Цементы. Методы определения предела прочности при изгибе и сжатии
Status: Effective
The standard applies to all types of cements and establishes test methods for determining the strength of bending and compression.
Стандарт распространяется на все виды цементов и устанавливает методы испытаний их для определения предела прочности при изгибе и сжатии.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
8/21/1981
SKU: RUSS58557
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.61 Mineral binders »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
014/2011 TR CU. Road safety »
Regulations and standards (to TR TS 014/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.3 Testing of products in construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.10 Cement. Gypsum. Lime. Building mixture »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.10 Cement. Gypsum. Lime. Building mixture »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh19 Test methods. Packaging. Marking »
National Standards for OKSTU »
CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS »
Control methods (testing, analysis, measurements) »
National Standards for OKSTU »
CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS »
Cement »
As a Replacement Of:
GOST 310.4-76: Cements. Methods of tests of bending and compression strengths
The Document References:
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 310.3-76: Cements. Methods of tests consistency, times of settining and of soundness
GOST 6139-2003: Sand for cement testing. Specifications
GOST 6139-91: Standart sand for cement testing. Specifications
The Document is Referenced By:
GOST 10178-76: Portland cement and slag Portland cement. Specification
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 15825-80: Coloured Portland cement. Specifications
GOST 19222-84: Arbolit and its products. General specifications
GOST 22236-76: Cements. Rules of acceptance
GOST 22236-85: Cements. Rules of acceptance
GOST 22266-76: Sulphate resisting cements. Specifications
GOST 22266-94: Sulphate-resistant cements. Specifications
GOST 22688-2018: Lime for building purposes. Test methods
GOST 22688-77: Lime for building purposes. Test methods
GOST 23558-94: Crushed stone-gravel-sandy mixtures, and soils treated by inorganic binders for road and airfield construction. Specifications
GOST 23789-2018: Gypsum binders. Test methods
GOST 23789-79: Gypsum binders. Test methods
GOST 24544-81: Concretes. Methods for determining shrinkage and creep deformations
GOST 24640-91: Additions for cements. Classification
GOST 25094-82: Active mineral additions. Methods of testing
GOST 25094-94: Active mineral additions for cements. Methods of testing
GOST 25098-82: Panels of partitions ferro-concrete for buildings of industrial enterprises. Specification
GOST 25328-82: Masonry cement. Specifications.
GOST 25881-83: Chemically resistant concretes. Methods of test
GOST 26798.1-96: Oil-well cement. Test methods
GOST 26798.2-85: Oil-well cements. Test methods of strength limits in bending and compression
GOST 30459-2003: Additives for concretes and mortars. Methods of determining the efficiency
GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency
GOST 30459-96: Concrete additives
GOST 30515-97: Cements General specifications
GOST 30744-2001: Cements. Methods of testing with using polyfraction standard sand
GOST 30873.3-2006: Hand-held portable power tools. Measurement of vibrations at the handle. Part 3. Rock drills and rotary hammers
GOST 30873.6-2006: Hand-held portable power tools. Measurement of vibrations at the handle. Part 6. Impact drills
GOST 31356-2007: Dry building cement binder mixes. Test methods
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 31358-2007: Dry building flooring cement binder mixes. Specifications
GOST 31376-2008: Dry building mixtures based on gypsum binder. Test methods
GOST 32017-2012: Products and systems for the protection and repair of concrete structures. Requirements for systems for concrete protection in the course of repair works
GOST 33174-2014: Automobile roads of general use. Cement. Technical requirements
GOST 33699-2015: Dry building putty cement binder mixes. Specifications
GOST 33762-2016: Products and systems for the protection and repair of concrete structures. Requirements for injection-sealing compounds and seals of cracks, cavities and clefts
GOST 34277-2017: Materials and systems for the protection and repair of concrete structures. Requirements for anchoring compositions and adhesion-strength fastenings of reinforcement elements
GOST 34885-2022: System of dry construction waterproofing mixtures based on cement binder for sealing static joints (cracks) in building structures. Technical conditions
GOST 5802-78: Mortars. Methods of tests
GOST 5802-86: Mortars. Test methods.
GOST 6139-2003: Sand for cement testing. Specifications
GOST 7473-2010: Fresh concrete. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 965-78: Portland cement, white. Specification
GOST 965-89: Portland cements, white. Specification
GOST 969-77: Cement. Specification
GOST 969-91: Alumina and high alumina cements. Specifications
GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods
GOST 9758-77: Fillers porous inorganic for concrete. Methods of tests
GOST 9758-86: Non-organic porous aggregates for construction work
GOST R 51883-2002: Cemented radioactive waste. General technical requirements
GOST R 52541-2006: Refractory castables. Preparation of test pieces
GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications
GOST R 54358-2011: Dry cement base decorative coats for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
GOST R 54358-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 54359-2011: Dry cement base adhesives, base coats and patching putties for facade’s thermo insulation composite systems with external mortar’s lays. Specifications
GOST R 54359-2017: Dry cement base decorative coats for faзade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 55224-2012: Cements for the transport construction. Specifications
GOST R 55936-2014: Polymer-cement base adhesives, base coats and patching putties for facade’s thermal insulation composite systems with external mortar’s lays. Specifications
GOST R 55936-2018: Polymer-cement base adhesives, base coats and patching putties for faсade’s thermo insulation composite systems with external plaster lays. Specifications
GOST R 56178-2014: Modifiers of organic-mineral origin of MB type for concretes, mortars and dry mixes. Specifications
GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures
GOST R 56387-2015: Dry-mix cement based adhesives for tiles. Specifications
GOST R 56687-2015: Protection of concrete and reinforced-concrete construction from corrosion. Test method of sulphate resistance of concrete
GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications
GOST R 58276-2018: Dry mixes for building on a gypsum binder. Test methods
GOST R 58767-2019: Building solutions. Test Methods
GOST R 58894-2020: Condensed silica fume for concrete and mortars. Specifications
GOST R 58896-2020: Concrete is chemically resistant. Test methods
GOST R 70109-2022: Protection against corrosion in construction. Concretes. General requirements for test performance
GOST R 70297-2022: Mining equipment. Turbines. General technical requirements and test methods
GOST R 70307-2022: Fine-grained concretes and mortars for construction. Methods for determination of strength in thin-walled and thin-walled structures
GOST R ISO 28927-10-2013: Mechanical vibration. Evaluation of vibration emission of hand-held power tools. Part 10. Percussive drills, hammers and breakers
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 3.06.03-85: Manual for the preparation and use of bitumen road emulsions
Manual for SNiP 3.06.03-85: Manual for the construction of asphalt concrete pavements and foundations of roads and airfields
Manual for SNiP 3.06.03-85: Manual for surface treatment on roads
Manual for SNiP 3.06.03-85: Manual on the construction of coatings and foundations of roads and airfields from soils reinforced with cementing materials to SNiP 3.06.03-85 and SNiP 3.06.06-88
Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities
Manual for SNiP 3.09.01-85: Manual on the use of chemical additives in the production of precast concrete structures and products
Manual for SNiP 3.09.01-85: Manual for the heat treatment of precast concrete structures and products
Manual for SNiP 3.09.01-85: The technology of manufacturing reinforced concrete pressure pipes with a steel core
Manual for SNiP 3.09.01-85: Manual for the heat treatment of reinforced concrete products with natural gas combustion products
Manual for SNiP 3.09.01-85: Production of prefabricated self-reinforced concrete structures and products
Manual for SNiP 3.09.01-85: Reinforced concrete molding technology manual
Manual for SNiP 3.09.01-85: Manual for heliothermal processing of concrete and reinforced concrete products using SVITAP coatings
Manual for SNiP 3.09.01-85: Manual for heliothermal treatment of concrete and reinforced concrete products using film-forming compounds
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MI 1353-86: Guidelines. GSE. Methods for determining the characteristics of cement materials on differential contractometers
MI 2486-98: Recommended Practice. National Measurement Standards. Shrinkage of Cement Materials. Methods for Measurement and Prediction Using KD-07 Shrinkage Meter
MI 2487-98: Recommended Practice. National Measurement Standards. Method for Accelerated Determination of Activity of Cement From its Shrinkage
MI 2488-98: Recommended Practice. National Measurement Standards. Method for Accelerated Determination of Water-to-Cement Ratio and Prediction and Monitoring Strength of Cement From its Shrinkage
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ODM 218.2.023-2012: Recommendations for the use of fast-hardening materials for the repair of cement concrete pavements
ODM 218.2.035-2013: Recommendations for the use of fly ash in concrete foundations of roads
ODM 218.3.012-2011: Cements for concrete coatings and road foundations
ODM 218.3.039-2014: Recommendations for testing film-forming materials for the care of freshly laid concrete
OSN-APK 2.10.32.001-04: Instructions for the use of chemical additives in concrete and mortars for rural construction
OST 218.2.001-2002: Portland cement for concrete artificial constructions and road pavements of the St. Petersburg ring road. Specifications
PNST 19-2014: Portlandcement nanomodified. Specifications
PNST 69-2015: Silica nanostructured binder. Specifications
R 392-80: Recommendations on the composition and technology of the preparation of very heavy concrete for pipeline weights
R 504-83: Recommendations for the manufacture of polymer-cement and glass-cement coatings
RB-023-02: Recommendations to the Establishment of Acceptance Criteria for Storage and Disposal of the Conditioned Radioactive Waste
RD 03-25-2003: Typical program of inspection of the state of construction work at nuclear facilities
RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities
RD 12.13.038-85: Instructions for the use of burned rocks in grouting solutions for aquifers and the mine workspace
RD 12.13.055-87: Instructions for the preparation and use of concrete and mortar for mining coal mines
RD 12.18.077-88: Recommendations on the selection of concrete mixes on slag-alkali binders for the manufacture of concrete and reinforced concrete structures at enterprises of the USSR Ministry of coal industry
RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel
SN 277-80: Guidelines for the Fabrication of Cellular Concrete Products
SN 549-82: Guidelines for the Design, Fabrication, and Application of Structures and Products Made of Organic Fiber Reinforced Concrete (Arbolite)
SNiP 3.06.04-91: Bridges and pipes
SNiP 5.01.23-83: Standard cement consumption rates for the preparation of precast concrete and monolithic concrete, reinforced concrete products and structures
SP 357.1325800.2017: Concrete hydraulic structures. Rules of works and acceptance of works
SP 46.13330.2012: Bridges and pipes
SP 78.13330.2012: Automobile roads
STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions
STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization
STO DOKTOR BETON 68686983-002-2011: Dry building mixtures trade mark "ДОКТОР БЕТОН®" for waterproofing and repair concrete construction. Technical specifications and quality characteristics
TR 111-00: Technical recommendations on the use of waterproofing compound "Akvatron-8" with an adjustable setting time for underground construction
TR 120-01: Technical recommendations on the waterproofing of the underground part of buildings and structures using materials "Akvatron-6u", "Akvatron-8b", "Akvatron-12"
TR 144-04: Technical recommendations on the use of waterproofing materials "Akvatron"
TR 149-03: Technical recommendations on the technology of using the complex of specialized finishing materials for the renovation of external and internal surfaces during reconstruction and major repairs of buildings
TU 102-264-81: Weighted reinforced concrete modular ring. UTK type for main pipelines
TU 102-271-80: Constructions of fine-grained (sandy) concrete for series 123 residential buildings
TU 102-416-86: Garage reinforced concrete prefabricated for individual use
TU 102-421-86: Concrete wading weights type 1 UBKM
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-541-89: Garage assembly individual use of ash and slag concrete
TU 102-738-95: Weighted reinforced concrete marsh wedge with a diameter of 530, 426, 525 with low steel reinforcement consumption (1 UBKm, 2 UBKm)
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 21-26-14-90: Cements for hydraulic structures
TU 218 RSFSR 620-90: Hard concrete mixes for the construction of cement concrete pavements and foundations of roads and airfields
TU 5745-001-42806964-97: Dry Non-Shrink Mixture Monofleks-A
TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications
VSN 126-90: Anchored Cast-In-Place Concrete Tunnel Lining for Transportation Tunnels and Subways. Design and Execution Standards
VSN 198-88: Cold-Weather Construction of Reinforced Roadbeds for Precast Reinforced Concrete Road Pavements at Oil Fields in Western Siberia
VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction
VSN 31-83: Execution Requirements for Concrete Work for Construction of Hydraulic Structures
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 48-93: Installation Manual for Cast-In-Place Concrete and Reinforced Concrete Tunnel Lining for Transportation Tunnels
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
VSN-1-90: Technological rules for the manufacture of centrifuged racks of contact network supports, communication lines and self-locking
VSP 02.01.32/Russian Defense Ministry: Rules for the production and acceptance of work in the construction of aerodromes of the Armed Forces of the Russian Federation
VSP 32-02-03 MO RF: Rules for the production and acceptance of work in the repair of rigid airfield pavements
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.