GOST 9.030-74
ГОСТ 9.030-74
|
|
Unified system of corrosion and ageing protection. Vulcanized rubbers. Method of testing resistance to attack by corrosive media in limp state
Единая система защиты от коррозии и старения. Резины. Методы испытаний на стойкость в ненапряженном состоянии к воздействию жидких агрессивных сред
Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 507 of 05.26.92
The standard applies to rubber and rubber products and establishes test methods for resistance in a relaxed state to the effects of aggressive liquid media in one or several indicators: changes in mass, volume and sample size (method A); the mass of substances extracted by the medium from the sample (method B); changes in the physical and mechanical properties of the sample (method B). Method A (change in mass and volume) and method B (change in physicomechanical properties without drying the sample after exposure to the medium) are used for control tests; Method A (size change), Method B and Method B (change, physicomechanical properties after exposure to the medium and drying the sample) are used for research tests. The indicator is set in standards or technical specifications for rubber or rubber products. The standard does not apply to porous rubber and products made from them.
Стандарт распространяется на резины и резиновые изделия и устанавливает методы испытаний на стойкость в ненапряженном состоянии к воздействию жидких агрессивных сред по одному или нескольким показателям: изменению массы, объема и размеров образца (метод А); массе веществ, экстрагированных средой из образца (метод Б); изменению физико-механических свойств образца (метод В). Метод А (изменение массы и объема) и метод В (изменение физико-механических свойств без высушивания образца после воздействия среды) применяют для контрольных испытаний; метод А (изменение размеров), метод Б и метод В (изменение, физико-механических свойств после воздействия среды и высушивания образца) применяют для проведения исследовательских испытаний. Показатель устанавливают в стандартах или технических условиях на резины или резиновые изделия. Стандарт не распространяется на пористые резины и изделия из них.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
7/1/1974
SKU: RUSS58572
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
19 Tests »
Construction (Max) »
Standards »
Other state standards used in construction »
83 Rubber, technical rubber, asbestos and plastic industries »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
019/2011 TR CU. On safety of personal protective equipment »
Regulations and standards (to ТР ТС 019/2011) »
Standards for pipe fittings (TPA) »
9. Materials for piping valves (TPA) »
9.3 Rubber »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.2 Testing of manufacturing products »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.10 Testing and monitoring products of rubber and plastics industry »
4.10.1 Rubber products »
ISO classifier »
19 TESTS »
19.040 Climatic tests »
National standards »
19 TESTS »
19.040 Climatic tests »
ISO classifier »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.060 Rubber »
National standards »
83 RUBBER, RUBBER-TECHNICAL, ASBESTOTECHNICAL AND PLASTIC INDUSTRY »
83.060 Rubber »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T9 Unified system of protection against corrosion and aging of materials and products »
T99 Test methods »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Unified system of protection against corrosion and aging of materials and products (ESZKS) »
National Standards for OKSTU »
RUBBER AND ASBESTOS PRODUCTS »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 421-59: Rubber. Test methods for swelling in liquids (oils, alkalis, acids, fuel, etc.)
GOST 424-63: Rubber. The method for determining the ultimate strength and elongation when exposed to liquids
The Document References:
GOST 11078-78: Sodium hydrate purified. Specifications
GOST 11109-90: Domestic cotton gauze. General specifications
GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12026-76: Filter paper for laboratory application
GOST 12329-77: Petroleum products and hydrocarbon solvents. Method for determination of aniline point and aromatic hydrocarbons
GOST 12433-83: Standard isooctanes. Specifications
GOST 127.1-93: Commercial sulfur
GOST 127-76: Specifications For Industrial Sulfur
GOST 14333-79: Rubber working mills. General specifications
GOST 14710-78: Petroleum toluene
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 202-84: Zinc white
GOST 2184-77: Sulphuric acid for industrial use. Specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24104-88: General purpose and reference laboratory balances
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 2603-79: Reagents. Acetone. Specifications
GOST 269-66: Rubber. General requirements for the physical mechanical tests
GOST 270-75: Rubber. Method of the determination elastic and tensile stress-strain properties
GOST 27752-88: Electronic mechanical quartz desktop and wall clocks and alarm clocks
GOST 28498-90: Liquid-in-glass thermometers
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
GOST 33-82: Petroleum products. Method for determination of kinematic viscosity and calculation of dynamic viscosity
GOST 39-79: Naphthame-2. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 4333-87: Petroleum products. Methods for determination of flash and ignition points in open crucible
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 5789-78: Reagents. Toluene. Specifications
GOST 61-75: Reagents. Acetic acid. Specifications
GOST 6484-64: Stearine. Specifications
GOST 6484-96: Stearine. Specifications
GOST 6709-72: Distilled water. Specifications
GOST 701-89: Concentrated nitric acid
GOST 740-76: Thiuram D. Specifications
GOST 7885-86: Industrial carbon for production of rubber
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 857-95: Industrial synthetic hydrochloric acid
GOST 8981-78: Acetic ether and n-butyl acetate technical. Specifications
GOST 9.024-74: Unified system of corrosion and ageing protection. Rubbers. Methods of heat ageing stability determination
GOST 9410-78: Petroleum xylol. Specifications
GOST 9572-93: Petroleum benzene
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
The Document is Referenced By:
Decision 30: On approval of the list of products in respect of which the customs declaration is accompanied by a document about the conformity assessment requirements of the technical regulations of the Customs Union "On safety of agricultural and forestry tractors and trailers to them" (TR TS 031/2012) (as amended on March 21, 2017)
Decision 30: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, resulting in voluntary compliance with the requirements of technical regulations of the Customs Union "On Personal Protective Equipment Safety" (TR CU 019/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and measurements, including
GOST 10362-2017: Pressure rubber hoses with thread reinforcement without end fittings. Technical conditions
GOST 10362-76: Pressure hoses of vulcanized rubber with thread reinforcement and without end fitting. Specifications
GOST 11032-97: Domestic gas storage water heaters. General specifications
GOST 12.4.024-76: Specific footwear for protection from vibration
GOST 12.4.076-90: Occupational safety standards system. Materials for special leather shoes. Quality characteristics nomenclature
GOST 12.4.133-83: Chamber gloves
GOST 12.4.162-85: Occupational safety standards system. Industrial polymeric boots for protection from mechanical effect. General technical requirements. Test methods
GOST 12.4.183-91: Materials for means of hand protection
GOST 12.4.242-2013: Occupational safety standards system. Additional protective footwear for works with radioactive and chemically toxic substances. General technical requirements and test methods
GOST 12.4.261.2-2014: Occupational safety standards system. Personal equipment of hand protection. Box-gloves. General technical requirements
GOST 12.4.270-2014: Occupational safety standards system. Decontaminable protective footwear with textile top for works with radioactive and chemically toxic substances. General technical requirements and test methods
GOST 12265-78: Rubber mold boots protecting from petroleum, petroleum products, and fats
GOST 12855-77: Rubber sheet for transformers. Specifications
GOST 14896-84: Rubber u-packing seals for hydraulic devices
GOST 17053.1-80: Ship shock absorbers AKCC-M. Specifications
GOST 17311-71: Moulded rubber durable soles, heels and heel pieces. Specifications
GOST 18698-79: Rubber delivery hoses with textile framework
GOST 18829-2017: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications
GOST 18829-73: Rubber o-ring seals for hydraulic and pneumatic equipment. Specifications
GOST 20010-93: Industrial rubber gloves
GOST 20219-93: Household water-circuit gas heating facilities. General specifications.
GOST 20568-75: Rubber masks for submarine swimming
GOST 21150-2017: Litol-24 grease. Technical conditions
GOST 21150-87: Litol-24 grease
GOST 21218-75: Rubber spheres dividing for pipelines. Specifications
GOST 21804-83: Shut-off devices for cylinders with liquefied gas of Py1, 6 MPa (16 kgf/cm2). Specifications
GOST 21804-94: Shut-Off Devices for Cylinders With Liquefied Hydrocarbon Gases With Pressure Up To 1.6 Mpa
GOST 21805-83: Pressure regulators for liquated gas of Py 1,6 MPa. Specifications
GOST 21805-94: Pressure regulators for liquefied hydrocarbon gases at pressures up to 1.6 mPa. General specifications.
GOST 22469-77: Swimming rubber flippers
GOST 22704-77: Rubber-fabric chevron seals for hydraulic units. Specifications
GOST 23008-78: Shock absorber liquid AЖ-12т. Specifications
GOST 23652-2023: Transmission oils. Technical conditions
GOST 23652-79: Transmission oils
GOST 25452-2017: High-pressure rubber hoses with metal windings without end fittings. Technical conditions
GOST 25452-90: Unarmored high-pressure rubber hoses with metal winding
GOST 2593-2014: Hose connections for railway rolling stock. Specifications.
GOST 26089-84: Rubber hoses for hydraulic brakes of automobiles
GOST 28084-89: Low-freezing cooling liquids. General specifications.
GOST 29090-91: Materials for equipment used in gas, welding, cutting and allied processes. General requirements
GOST 29182-91: Rubber footwear. Lined or unlined rubber industrial boots with chemical resistance
GOST 30154-94: Domestic gas ranges for tourists. General specifications
GOST 30778-2001: Rubber compression-types for windows and doors. Specifications
GOST 30852.0-2002: Explosionproof electrical apparatus. Part 0. General requirements
GOST 31402-2013: Brake cylinders for railway rolling stock. General specifications
GOST 31610.0-2012: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST 31619-2012: Implantable mammary prostheses. General technical requirements. Test methods
GOST 31945-2012: Flexible cables and cords for underground and open mining operations. General specifications
GOST 32028-2012: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods
GOST 32029-2012: Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods
GOST 32032-2013: Taps for gas burning appliances. General technical requirements and test methods
GOST 32586-2013: Vibroinsulators rubber and rubber-reinforced for automotive technic. Specifications
GOST 3303-82: Rubber hot-water bottles
GOST 33341-2015: All-season antifreeze compositions and liquid coolants for heat-exchange systems. Specifications
GOST 33724.1-2016: Pneumatic brake equipment of the railway rolling stock. Safety Requirements and Inspection Procedures. Part 1. Air distributors, brake valves, brake units, sealing rubber components
GOST 34078-2017: Rail fasteners pads of railway. Specifications
GOST 34734-2021: Personal protective equipment for firefighter's feet. General technical requirements. Test methods
GOST 38-72: Rubber packing rings for joining heads of brake hoses and end cocks of autobrakes. Specifications
GOST 4.493-89: Product-quality index system. Materials for means of hands protection. Nomenclature of indices
GOST 4671-76: Rubber and rubberized metal components for the bottom hole hydraulic engine bearings. Specifications
GOST 4997-75: Dielectric rubber carpets. Specifications
GOST 5228-76: Rubber o-rings for the couplings of asbestos-cement pipes. Specification
GOST 5228-89: Rubber o-rings for the couplings of asbestos-cement pipes
GOST 5375-79: Rubber moulded boots. Specifications
GOST 5398-76: Textile reinforced pressure-suction rubber hoses without fittings. Specifications
GOST 5496-78: Rubber technical tubes. Specifications
GOST 6286-2017: High pressure rubber hoses with metal braids without end fittings. Technical conditions
GOST 6286-73: High-pressure rubber hoses with metal braids without fittings
GOST 6365-74: Rubber protectors for drill pipes. Specifications
GOST 6467-79: Vulcanized rubber cords of round and square cross-sections. Specifications
GOST 6557-89: Rubber rings for connection fitting. Specifications
GOST 6678-72: Rubber sealing cups for pneumatic apparatus. Specifications
GOST 6980-76: Accumulator ebonite monoblocks for autocars, autobuses and tractors. Specifications
GOST 7199-77: Rubber-metallic ship bearings. Specifications
GOST 7338-65: Technical rubber sheets
GOST 7338-90: Rubber and rubber-fabric sheets. Specifications
GOST 7866.2-76: Rubber-insulated flexible PVC-sheathed shipboard cables. Specifications
GOST 8752-79: Metal insert rubber seals for rotating. Specifications
GOST 9.061-75: Unified system of corrosion and ageing protection Rubbers. Accelerated test method for resistance to attack by liquid corrosive media during rotation under frictional condition
GOST 9.068-76: Unified system of corrosion and ageing protection. Sealants. Test methods for resistance to attack by liquid corrosive media
GOST 9.070-76: Unified system of corrosion and ageing protection. Vulcanized rubbers. Test methods for resistance to attack by liquid corrosive media at static compressive strain
GOST 9.071-76: Unified system of corrosion and ageing protection. Vulcanized rubbers for articles working in liquid corrosive media. Technical requirements
GOST 9298-77: Accumulator ebonite monoblocks for aviation. Specifications
GOST 9356-75: Rubber hoses for gas welding and metal cutting. Specifications
GOST R 12.4.204-99: Occupational safety standards system. Personal equipment of hand protection. Box-gloves. General technical requirements
GOST R 12.4.239-2007: Occupational safety standards system. Additional protective footwear for works with radioactive and chemically toxic substances. General technical requirements and test methods
GOST R 12.4.242-2007: Occupational safety standards system. Decontaminable protective footwear with textile top for works with radioactive and chemically toxic substances. General technical requirements and test methods
GOST R 22.9.06-96: Safety in emergencies. Elastic and power rescuing constructions. General technical requirements
GOST R 50696-2006: Domestic cooking appliances burning gas. General technical requirements and test methods
GOST R 50714-94: Artificial leather for personal safety facilities. General specifications
GOST R 50982-2003: Fire equipment. Specialized fire department tools. General technical requirements. Test methods
GOST R 50982-2009: Fire equipment. Specialized fires department tools. General technical requirements. Test methods
GOST R 50982-2019: Fire fighting equipment. Tool for special work in fires. General technical requirements. Test methods
GOST R 50982-96: Fire equipment. Specialized fire department tools. General requirements. Test methods
GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements
GOST R 51842-2001: Automatic shut-off valves for gas burners and gas appliances. General technical requirements and test methods
GOST R 51843-2001: Flame supervision devices for gas burning appliances. Thermo-electric flame supervision devices. General technical requirements and test methods
GOST R 51843-2013: Flame supervision devices for gas burning appliances. Thermo-electric flame supervision devices
GOST R 51982-2002: Gas appliances pressure governors for inlet pressure up to 20 kPa. General technical requirements and test methods
GOST R 51983-2002: Multifunctional controls for gas burning appliances. General technical requirements and test methods
GOST R 52057-2003: Taps for gas burning appliances. General technical requirements and test methods
GOST R 52266-2004: Cable products. Optical fibre cables. General specifications
GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST R 52372-2005: Flexible cables and cords for underground and open mining operations. General specifications
GOST R 53000-2008: Implantable mammary prostheses. General technical requirements. Test methods
GOST R 53265-2009: Mean of individual defence of feet for fire-fighter. General technical requirements. Test methods
GOST R 53265-2019: Fire fighting equipment. Personal protective equipment for firefighter legs. General technical requirements. Test methods
GOST R 53627-2009: Fine-layered polymer coating for roadway of bridges. Specifications
GOST R 53820-2010: Motor vehicles. Details of sealing and protective. Technical requirements and test methods
GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications
GOST R 54823-2011: Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
GOST R 54824-2011: Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures up to and including 50 kPa
GOST R 55206-2012: Gas/air controls for gas burners and gas burning appliances. Part 1. Pneumatic types
GOST R 55209-2012: Safety and control devices for gas burners and gas burning appliances. General requirements
GOST R 55735-2013: Mining equipment. High pressure mine rubber hoses with metallic tapings and metallic braidings with fitting. Safety requirements and test methods
GOST R 56291-2014: Rail fasteners pads of railway. Specifications
GOST R 58714-2019: The main pipeline transport of oil and oil products. Pipelines from flexible flat sleeves. General specifications
GOST R EN 257-2004: Mechanical thermostats (thermoregulators) for gas appliances. General technical requirements and test methods
NB ZhT TsV-TsT 078-2003: Rubber sealing elements of rolling stocks brake pneumatic system. Safety norms
NPB 158-97*: Special protective shoes for firefighters. General technical requirements and test methods
ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei
RD 24.023.52-90: Products of chemical engineering. Gumming. Typical technological process.
RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries
STB 1387-2003: Occupational safety standards system. Special purpose and industrial clothing. General specifications
TR 186-07: Technological regulations for the installation of waterproofing keys Aquastop when constructing and restoring waterproofing of deformation and technological joints of concrete in reinforced concrete structures of underground and submerged structures
TU 2531-002-53597015-01: Face seal (rubber cuff) to protect the annular space at the junctions of main pipelines under roads and railways
TU 2531-005-01297858-2000: Sealing cuffs for pipelines over roads and railways laid in a protective case (casing)
TU 2531-007-01297858-02: Rubber-sealing cuffs for pipelines over roads and railways, laid in a protective case (casing)
TU 32 CP 828-97: Rubber parts for railway leveling
TU 38 0051166-98: Rubber compounds for the rubber products of aircraft
TU 38 105250-77: Rubber parts for cars AvtoVAZ, other plants and rubber, applicable for their manufacture. Technical conditions
TU 38 105823-78: Rubber parts for cars GAZ and KAMAZ and rubber used for their manufacture
TU 38-105116-81: Rubber plate for sealing gaskets of vacuum systems
TU 38-105376-82: Technical rubber products. Technical conditions
TU 5768-001-55258056-04: Thermal insulation products from elastomeric materials based on foamed synthetic rubbers
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.