Steels alloyed and highalloyed. Methods for the determination of selenium
Стали легированные и высоколегированные. Методы определения селена
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard establishes titrimetric and using automatic analyzers methods for the determination of nitrogen in metallic chrome.
Стандарт устанавливает титриметрический и фотометрический методы определения селена в легированных и высоколегированных сталях при массовых долях от 0,03 до 0,50 %.
Format: Electronic (pdf/doc)
Page Count: 12
Approved: Gosstandart of the USSR,
The Product is Contained in the Following Classifiers:
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.1 Ferrous metals »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V39 Test methods. Packaging. Marking »
National Standards for OKSTU »
CAST IRON, FERRO ALLOYS, STEEL »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 12363-66: Steels (alloyed and highly alloyed). Method for the determination of the content of selenium
The Document References:
GOST 10163-76: Reagents. Soluble starch. Specifications
GOST 10652-73: Reagents. Dihydrate ethylenediaminetetraacetic acid disodium salt. Specifications
GOST 14262-78: Super pure sulphuric acid. Specifications
GOST 20560-81: Alloy and high-alloy steels. General requirements for methods of analysis
GOST 23058-78: Gelatin. Raw materials for the medical industry. Specification
GOST 23058-89: Gelatine. Raw material for medical industry. Specifications
GOST 244-76: Photographic grade sodium thiosulphate, crystalline - specification
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 36-78: Tin dichloride 2-water. Specification
GOST 3760-79: Reagents. Ammonia water. Specifications.
GOST 4165-78: Reageuts. Copper II sulphate pentahydrate. Specifications
GOST 4201-79: Reagents. Sodium bicarbonate. Specifications
GOST 4202-75: Reagents. Potassium iodate. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4232-74: Reagents. Potassium iodide. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 5455-74: Selenium. Specification
GOST 5789-78: Reagents. Toluene. Specifications
GOST 5841-74: Reagents. Hydrazine sulfate
GOST 5848-73: Reagents. Formic acid. Specifications
GOST 6552-80: Reagents. Orthophosphoric acid. Specifications
GOST 6691-77: Reagents. Urea. Specifications
GOST 6738-71: Selenium of high purity
The Document is Referenced By:
GOST 10160-75: Magnetically soft precision alloys
GOST 10498-63: Pipes seamless extra-thin-walled from corrosion-resistant (stainless) steel. Specification
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 11068-64: Tubes of stainless steel, electro welded
GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications
GOST 1215-79: Malleable iron castings
GOST 13663-68: Shaped steel pipes technical requirements
GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications
GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications
GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications
GOST 14162-79: Steel tubes of small dimensions (capillary)
GOST 18143-72: Corrosion resistant
GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel
GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 19442-74: Shaped bars for blades and bars for blade coupling of steam turbines made of corrosion-resistant and high-temperature steel
GOST 20295-74: Steel welded pipes for main gas and oil pipelines
GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications
GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.
GOST 2246-70: Welding steel wire. Specifications
GOST 23270-78: Pipe-billets for machining. General specifications
GOST 23270-89: Tube-billets for machining
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 23705-79: Hot-rolled and forged high-temperature alloy bars
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 26131-84: Heat-resisting steel forgings. General specifications
GOST 2787-2019: Ferrous metals are secondary. General specifications
GOST 2787-75: Recycled ferrous metals
GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.
GOST 34468-2018: Pyatniki freight cars of 1520 mm gauge railways. General technical conditions
GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 8467-57: Drill pipes for exploration with nipple joint
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9940-72: Seamless hot deformed tubes made of corrosion resistant steel
GOST R 50.04.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for the steels and alloys melting and casting procedures
GOST R 50.05.17-2019: Conformity assessment system in the field of atomic energy use. Steel castings for equipment and pipelines of nuclear power plants. Control procedure
GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications
GOST R 53444-2009: Motor vehicles. Crankshafts of engines. General technical requirements and methods of tests
GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54908-2012: Heat-resistant steel metal products. Specifications
GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.020.03-82: Stamped billets of turbine and compressor blades made of corrosion-resistant and heat-resistant steel. General Specifications. (2010 edition, including 3 amendments)
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control
RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
SP 101-34-96: Set of rules for construction of trunk pipelines (SPSMG). Code of practice for selection of pipes for the construction of trunk gas pipelines. RAO "Gazprom", 11/15/90
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
Customers Who Viewed This Item Also Viewed:
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Foundation bolts. Structure and dimensions
Pipeline valves. Leakage rates of valves
Hot-rolled sheet. Range
Steel welded vessels and apparatus. General technical conditions
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Billet of rotor shafts and rings of turbine generators
Steel building structures. General specifications
Fencing constructions for translucent buildings and structures. Design rules
Metal products from structural alloy steel. Specification
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Reinforcing rolled products for reinforced concrete constructions. Specifications
Electromagnetic compatibility of multimedia equipment. Emission requirements
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.