GOST 19912-2012
ГОСТ 19912-2012
|
|
Soils. Field test methods: cone penetration test and dynamic probing
Грунты. Методы полевых испытаний статическим и динамическим зондированием
Status: Effective - Supersedes. IUS 10-2013
The standard applies to dispersed natural, man-made and frozen soils, the composition and condition of which allow continuous probe introduction, and establishes methods of field testing by probing in their study for design and construction.
Cтандарт распространяется на дисперсные природные, техногенные и мерзлые грунты, состав и состояние которых позволяют проводить непрерывное внедрение зонда, и устанавливает методы полевых испытаний зондированием при их исследовании для проектирования и строительства.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/27/2012
SKU: RUSS58788
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.50 Foundations and foundations of buildings and structures »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
I Environmental-legal and economic-legal mechanisms for environmental protection »
1 Management infield of environmental protection and environmental management »
1.5 Environmental monitoring and control »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.080 The quality of soil. Soil science »
13.080.20 Physical properties of soils »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.080 The quality of soil. Soil science »
13.080.20 Physical properties of soils »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh39 Test methods. Packaging. Marking »
As a Replacement Of:
GOST 19912-2001: Soils. Field test methods by static and dynamic sounding
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation
GOST 19912-2001: Soils. Field test methods by static and dynamic sounding
GOST 30672-2012: Soils. Field testing. General
The Document is Referenced By:
Amendment 5: Amendment to SP 20.13330.2016 SNiP 2.01.07-85* Loads and impacts
Amendment 5: Amendment to SP 22.13330.2016 SNiP 2.02.01-83* Foundations of Buildings and Structures
Amendment 5: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
GOST 32868-2014: Public roads. Requirements for engineering and geological surveys
GOST 33063-2014: Automobile roads of general use. Classification of terrain and ground types
GOST 33179-2014: Automobile roads of general use. Survey of bridges and viaducts. General requirements
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements
GOST R 58270-2018: Soils. Test method of wedging dilatometer
GOST R 58888-2020: Soils. Field test method by temperature-logging static sounding
GOST R 59594-2021: Soils. Field test method with electric logging static sounding
GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters
ODM 218.2.037-2013: Guidelines for survey work in the overhaul of roads
ODM 218.2.038-2014: Guidelines for the overhaul and reconstruction of retaining walls and retaining structures
ODM 218.2.054-2015: Recommendations for the use of textile-sand piles in the construction of roads on weak grounds
ODM 218.2.066-2016: Guidelines for the use of anchor piles and micropiles as part of the engineering protection of roads
ODM 218.2.069-2016: Recommendations for the design of approaches of the roadbed on a weak base to artificial structures
ODM 218.2.092-2018: Recommendations for the use of sheet piles made of polymer materials in road construction
ODM 218.2.098-2018: Guidelines for the use of a prestressed homogeneous system for strengthening slopes based on a high-strength steel network (more than 1770 N
ODM 218.3.094-2017: Recommendations on engineering and geological surveys and design of engineering protection structures on road sections with the development of slope processes
ODM 218.3.103-2018: Recommendations for the use of screw piles on roads
ODM 218.3.120-2020: Methodical recommendations for the calculation of road embankments on soft base soils using geosynthetic materials
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
PNST 802-2022: Soils. Drilling sounding method
PNST 803-2022: Soils. Method for measuring lateral pressure with a flat dilatometer
SP 22.13330.2016: Soil bases of buildings and structures
SP 23.13330.2011: Foundation of hydraulic structures
SP 23.13330.2018: Foundations of hydraulic structures
SP 24.13330.2011: Pile foundations
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 25.13330.2020: Bases and foundations on permafrost soil SNiP 2.02.04-88
SP 314.1325800.2017: Tracks overland rail cranes. Design, arrangement and exploitation
SP 361.1325800.2017: Buildings and constructions. Protective measures in the zone of influence of construction of underground objects
SP 375.1325800.2017: Industrial chimneys. Design rules
SP 420.1325800.2018: Engineering surveys for construction in areas of landslide development. General requirements
SP 446.1325800.2019: Engineering and geological surveys for construction. General rules for the production of work
SP 448.1325800.2019: Engineering surveys for construction in areas of subsidence. General requirements
SP 45.13330.2017: Earthworks, grounds and footings
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
