GOST 21778-81
ГОСТ 21778-81
|
|
System of ensuring of geometrical parameters accuracy in construction. Main principles
Система обеспечения точности геометрических параметров в строительстве. Основные положения
Status: Valid - Supersedes
The standard applies to the design and construction of buildings and structures, as well as to the design and manufacture of building structures, parts and products for them, and establishes the basic accuracy characteristics and basic provisions for the purpose, process support, monitoring and evaluation of the accuracy of geometric parameters, ensuring compliance with the functional requirements for buildings, structures and their individual elements at all stages of construction design and production. The main provisions established by this standard are developed by a set of standards of the System for Ensuring the Accuracy of Geometric Parameters in Construction. In accordance with the requirements of the System standards, the newly developed and revised standards and other regulatory and technical documents on specific elements and structures of buildings and structures, on working drawings and process documentation establish requirements for the accuracy of structures, their elements and performance of work, as well as methods and means technological support and accuracy control.
Стандарт распространяется на проектирование и строительство зданий и сооружений, а также на проектирование и изготовление строительныхконструкций, деталей и изделий для них и устанавливает основные характеристики точности иосновные положения по назначению, технологическому обеспечению, контролю и оценке точности геометрических параметров, обеспечивающие соблюдение функциональных требований к зданиям, сооружениям и их отдельным элементам на всех этапах строительного проектирования и производства. Установленные настоящим стандартом основные положения развиваются комплексом стандартов Системы обеспечения точности геометрических параметров в строительстве. В соответствии с требованиями стандартов Системы во вновь разрабатываемых и пересматриваемых стандартах и других нормативно-технических документахна конкретные элементы и конструкции зданий и сооружений, на рабочих чертежах и в технологической документации устанавливают требования к точности конструкций, их элементов и выполнения работ, а также методы и средства технологического обеспечения и контроля точности.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstroy of the USSR (State Committee of the Council of Ministers of the USSR for Construction),
12/2/1980
SKU: RUSS58812
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.24 Dimensional interchangeability and compatibility »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.100 Technical drawings »
01.100.30 Construction drawings »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.100 Technical drawings »
01.100.30 Construction drawings »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.010 Construction industry »
91.010.30 Technical aspects »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.010 Construction industry »
91.010.30 Technical Aspects »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh0 General rules and regulations for construction and building materials »
Zh02 Design and calculation norms »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Design Documentation System for Construction (SPDS) »
As a Replacement Of:
GOST 21778-76: System for ensuring geometric accuracy in construction. General principles
The Document References:
GOST 21779-76: System for ensuring geometric accuracy in construction. Technological tolerances of geometric parameters
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 21780-76: System for ensuring geometric accuracy in construction. General rules for calculating accuracy
GOST 21780-83: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 23615-79: System of ensuring accuracy of geometrical parameters in construction. Statistical analysis of accuracy
GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
The Document is Referenced By:
GOST 21.113-88: System of design documentation for construction. Presentation of dimensional accuracy data
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 21780-83: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)
GOST 23118-2012: Building steel structures. General specifications
GOST 23118-78: Structural metalwork. General specifications
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 26607-85: System of ensuring of geometrical parameters accuracy in construction. Functional tolerances
GOST 28984-2011: Modular coordination of construction dimensions. General.
GOST 28984-91: Modular size coordination in building engineering. Basic rules
GOST 31173-2003: Steel doors. Specifications
GOST 31174-2003: Gates of metall. General specifications
GOST 31174-2017: Gates of metall. General specifications
GOST 33146-2014: Automobile roads of general use. Pipes for road culvert. Control methods
GOST 34329-2017: Formworks. General specifications
GOST 475-2016: Door Blocks wooden and combined. General specifications
GOST R 51872-2002: Executive geodetic documentation in construction. Performance rules
GOST R 52085-2003: Formworks. General specifications
GOST R 58331.1-2018: Systems and facilities reclamation. Irrigation canals. Cross sections
GOST R 58801-2020: Systems and facilities reclamation. Drainage channels. Cross sections
Manual for SNiP 3.07.02-87: Allowance for the production and acceptance of work during the construction of new, reconstruction and expansion of existing hydrotechnical sea and river transport facilities
MDS 11-19.2009: Interim recommendations for organization of technology geodetic quality construction of multifunctional high-rise buildings
MDS 11-20.2009: Methodics of precision noncontact executive survey of hinged facade systems with air gaps in the construction of tall buildings
MDS 13-24.2010: Recommendations on the rules of geotechnical support of high-rise construction and adjacent space
MR 21.02-95: Recommended Practice for Procedure for Designating Accuracy Characteristics in Construction Drawings
ODM 218.2.012-2011: Classification of structural elements of artificial road structures
ODM 218.3.042-2014: Recommendations for determining the parameters and assignment of categories of defects in assessing the technical condition of bridges on highways
ODM 218.4.001-2008: Guidelines for the organization of inspection and testing of bridge structures on highways
Order 413-st: On approval of the national standard of the Russian Federation
PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters
SNiP III-16-80: Prefabricated concrete and reinforced concrete structures
SP 126.13330.2012: Survey operations in construction
SP 126.13330.2017: Geodetic works in building
SP 359.1325800.2017: Vertical cylindrical steel silos for bulk products storaging. Design rules
SP 414.1325800.2018: Fixed formwork. Design rules
SP 443.1325800.2019: Bridges with aluminum alloy structures. Design rules
ST SEV 3976-83: Residential and public buildings. The main provisions for design
VSN 34-91/MT-st: Execution and Acceptance Requirements for New Construction, Rehabilitation, and Expansion of Existing Marine and River Hydraulic Transport Structures. Part I: Part II: Part III
VSN 361-85: Installation of Process Equipment on Foundations
VSN 56-97: Design and Basic Principles for Technology for Production of Fiber Reinforced Concrete Structures
VSP 103-97: Steel Fiber Reinforced Concrete Enclosures for Secure Spaces in Russian Federation Central Bank Facilities. Execution, Quality Control, and Acceptance Requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
