GOST 30379-95
ГОСТ 30379-95
|
|
Electromagnetic compatibility of technical means of protection fire-alarm and fire-protection systems. Requirements, standards and methods of tests on interference immunity and industrial interference
Совместимость технических средств охранной, пожарной и охранно-пожарной сигнализации электромагнитная. Требования, нормы и методы испытаний на помехоустойчивость и индустриальные радиопомехи
Status: Not effective - Canceled in the Russian Federation. IUS 3-2001
This standard applies to developed, manufactured, upgraded and imported technical means of security, fire and fire alarm systems.
Настоящий стандарт распространяется на разрабатываемые, изготовляемые, модернизируемые и импортируемые технические средства охранной, пожарной и охранно-пожарной сигнализации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
5/15/1996
SKU: RUSS58984
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.15 Testing and control of products of electronic, optical and electrical industry »
4.15.2 Equipment and apparatus for radio, television and communication »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.20 Fire fighting equipment »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.20 Fire fighting equipment »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
National standards »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
ISO classifier »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
33.100.01 Electromagnetic compatibility in general »
National standards »
33 TELECOMMUNICATIONS. AUDIO AND VIDEO EQUIPMENT »
33.100 Electromagnetic Compatibility (EMS) »
33.100.01 Electromagnetic compatibility in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Electronic engineering, electronics and communications »
E0 General rules and regulations for electronic engineering, electronics and communications »
E02 Design and calculation norms »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Complete devices for control and protection, specialized different »
National Standards for OKSTU »
SPECIAL PURPOSE INSTRUMENTS AND AUTOMATION »
Control methods (testing, analysis, measurements) »
The Document References:
GOST 11001-80: Man-made noise radio interference measuring apparatus. Technical requirements
GOST 12.1.002-84: Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
GOST 12.1.006-84: Occupational safety standards system. Electromagnetic fields of radio frequencies. Permissible levels at work-places and requirements for control
GOST 12.1.030-81: Electrical safety protective grounding, neutral grounding
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.3.019-80: Occupational safety standards system. Electrical tests and measurements. General safety requirements
GOST 12.4.026-76: Signal colors and safety signs
GOST 12.4.040-78: Industrial equipment controls
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16842-82: Industrial radio-interferences. Test methods for radio-interference sources
GOST 23611-79: Electromagnetic compatibility of radio-electronic equipment. Terms and definitions
GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle
GOST 28690-90: Mark of conformity of technical means electromagnetic compatibility requirements. Form, sizes and technical requirements
GOST 29037-91: Electromagnetic compatibiliтy of technical means. Certification tests. Ceneral rules
GOST 29073-91: Electromagnetic compatibility for industrial process measurement and control equipment. Immunity to electromagnetic disturbance. General introduction
GOST 29156-91: Electromagnetic compatibility of technical equipment. Electrical fast transient /burst immunity. Technical requirements and test methods
GOST 29191-91: Electromagnetic compatibility of technical means. Electrostatic discharge immunity. Technical requirements and test methods
GOST 29216-91: Man-made noise from information technology equipment
GOST 29280-92: Electromagnetic compatibility of technical equipment. Immunity tests. General introduction
GOST 30374-95: Electromagnetic compatibility of technical equipment. Microsecond impulse disturbance immunity. Technical requirements and test methods
GOST 30375-95: Electromagnetic compatibility of technical equipment. Immunity to radiated radio-frequency electromagnetic fields in the frequency range 26 to 1000 MHz. Technical requirements and test methods
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
RD 50-697-90: Regulation on certification of technical means for compliance with the requirements of electromagnetic compatibility and accreditation of testing laboratories (centers) for testing in the field of EMC
The Document is Referenced By:
GOST 22261-94: Measuring instruments for electrical
GOST 31817.1.1-2012: Alarm systems. Part 1. General requirements. Section 1. General
ST SSFZhT TsUO 082-2000: Rolling stock and special railway rolling stock fire detection and fire extinguishing sys-tems. Standard test methods
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.