GOST 577-68

ГОСТ 577-68

Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

Индикаторы часового типа с ценой деления 0,01 мм. Технические условия

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard applies to dial gauges with a scale value of 0.01 mm and measurement ranges up to 25 mm.

Стандарт распространяется на индикаторы часового типа с ценой деления 0,01 мм и диапазонами измерений до 25 мм.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 12

Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR, 2/5/1968

SKU: RUSS59175

Price: $159.03

English keywords: measuring instruments;



The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P5 Instruments, tools and devices for linear, angular, profile and spatial measurements » P53 Instruments for measuring lengths (outer and inner dimensions) »


As a Replacement Of:

GOST 577-60: Clock-type dial indicators graduated in unit divisions of 0,01 mm

The Document References:

GOST 11007-66: Measuring tips of apparatus for linear measurements. Specifications

GOST 13762-80: Instruments for linear and angular measurements. Marking, packing, transportation and storage

GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage

GOST 15593-70: Indication. Gauge heads and transducers. Connected sizes

GOST 2.601-95: Operational documents

GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles

GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 577-60: Clock-type dial indicators graduated in unit divisions of 0,01 mm

GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means

GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements

MI 2192-92: State system for ensuring uniformity of measurements. Indicators of the watch type with a division value of 0.01 mm. Method of verification

PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation

RD 50-690-89: Methodological instructions. Industrial product dependability. Methods for estimating dependability based on experimental data.

The Document is Referenced By:

GOST 10060-2012: Concretes. Methods for the determination of frost-resistance

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10480-88: Powder metal compacting mechanical automatic machines. Parameters and dimensions. Norms of accuracy

GOST 10632-2007: Wood particle boards. Specifications

GOST 10632-2014: Wood particle boards. Specifications

GOST 10632-89: Wood particle boards

GOST 10635-88: Particle boards. Methods for determination of ultimate strength and modulus of elasticity in bending

GOST 10663-88: Automatic straightening and cutting machines for round steel, model steel and reinforcement. Parameters and dimensions. Accuracy norms

GOST 10667-90: Sheet organic glass. Specifications

GOST 10739-84: Automatic sheet stamping presses with underheath drive. Parameters and dimensions. Norms of accuracy

GOST 10767-87: Automatic machines for thermoplastic and thermosofting materials. Parameters and dimensions. Norms of accuracy

GOST 10767-98: One position thermoplast and thermosetting plastic working automatic machines. Basic parameters and dimensions. Norms of accuracy

GOST 10782-85: Glass bottles for blood, transfusion and infusion preparations/compounds

GOST 10-88: Inside micrometers. Specifications

GOST 10918-82: Micaceons plates and micaceons details. Test methods

GOST 11004-84: Principal ventilation mine blowers

GOST 11098-75: Gauge callipers with reading arrangement. Specifications

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 11529-2016: Polyvinylchloride materials for floors. Control methods

GOST 11529-86: PVC materials for floors. Methods of control

GOST 11539-2014: Bakelized plywood. Specifications

GOST 11603-73: Wood. Method for determination of residual stress

GOST 11647-75: Combined press-shears and combined shears. Norms of accuracy

GOST 11679.1-2018: Rubber-metal instrument shock-absorbers. Specifications

GOST 11679.1-76: Rubber-metal shock-absorbers for instruments. Specifications

GOST 11843-76: Wood particle boards. Method for determination of hardness

GOST 12.4.166-2018: Occupational safety standards system. Respiratory protective devices. Facepiece. General specifications

GOST 12.4.166-85: Helmet face piece for commercial gas masks

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 12893-83: Single-seated, double-seated and cage control valves.

GOST 13648.1-78: Board. Method for the determination of deformation after compression

GOST 13715-78: Glued boards. Specifications

GOST 13750-88: Micaceous plates for instrument-making. Specifications

GOST 13913-78: Laminated wood plastics. Specifications

GOST 14162-79: Steel tubes of small dimensions (capillary)

GOST 14183-78: Organic watch glass. Specifications

GOST 14614-79: Plywood plus

GOST 15066-78: Foundry moulding machines. Norm of accuracy

GOST 15130-86: Optical quartz glass

GOST 15136-2020: Refractory products. Methods for measuring the depth of bumping of corners and edges

GOST 15136-78: Refractory articles. Method of damage depth measuring of angles and ribs

GOST 15474-79: Single-shaft open single-acting presses. Standards of accuracy

GOST 15475-89: Simple action closed single-crank presses. Norms of accuracy

GOST 15595-84: Die-casting machines

GOST 15612-70: Products from wood and wood materials. Methods for determination of roughness parameters

GOST 15844-2014: Glass packaging for milk and dairy products. General specifications

GOST 15844-70: Glass containers for milk and milk products

GOST 160-84: Spindles for twisting and spinning machines

GOST 16115-88: Diamond segment cut-off wheels of 1a1rss/c1 and1a1rss/c2 forms

GOST 16153-80: Monocrystalline germanium. Specifications

GOST 16188-70: Sorbents. Method for determination of abrasive hardness

GOST 16483.11-72: Wood. Method for determination of conventional ultimate strength in compression perpendicular to grain

GOST 16483.2-70: Wood. Method for determination of conventional ultimate strength in local compression perpendicular to grain

GOST 16483.35-88: Wood. Method for determination of swelling

GOST 16483.37-88: Wood. Method for determination shrinkage

GOST 16509-89: Swing beam sheet-bending machines. Parameters and dimensions. Standards of accuracy

GOST 16817-71: Sand and metal moulds for determination of linear shrinkage of non-ferrous metals and alloys. Design and dimensions. Technical requirements

GOST 17177.9-81: Heat insulating construction materials and products. Method for determining the compressive strength at 10% deformation

GOST 17177-87: Heat insulating construction materials and products. Methods of control

GOST 17177-94: Thermal insulating materials and products for building application. Test methods.

GOST 17245-79: Soils. Method of laboratory determination of temporary resistance for single-axial compression

GOST 17327-88: Bread baking forms. Specifications

GOST 17622-72: Industrial organic plastic. Specifications

GOST 17918-72: Sound absorbing facing mineral wool plates on starch binding

GOST 18096-87: Mica details for electronic devices. Specifications

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 18128-2018: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications

GOST 18128-82: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications

GOST 18616-80: Plastics. Method of determination of shrinkage

GOST 19147-82: Skiing sticks. Specifications

GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications

GOST 19316-73: Centrifugal moulds. Specifications

GOST 19946-74: Dies for casting of non-ferrous alloys. Specifications

GOST 20131-80: Pattern plates

GOST 20386-74: Bottom boards. Specifications

GOST 20492-87: Tape recorder cassette. General specifications

GOST 20558-82: Steel zinc-coated houseware items. General specifications

GOST 20692-2003: Roller bits. Specifications

GOST 21028-75: Jigs for machining holes of moulding boxes and pattern plates. Specifications

GOST 21153.0-75: Rocks. Sampling and general requirements for the methods of physical testing

GOST 21305-75: Elements and assembly units for heated core boxes. Specifications

GOST 21523.10-88: Modified wood. Method for determination of wear-proofness

GOST 21523.11-79: Modified wood. Method of density determination

GOST 21546-88: Hammer dies for die forging

GOST 21554.1-81: Sawn timber and blanks. Methods for determination of modulus of elasticity in static bending

GOST 21554.7-78: Sawn timber and semi-manufactures. Method of determination of ultimate strength in bearing perpendicular

GOST 22082-76: Injection mould bases, detail-blanks and details of injection moulds. Specifications

GOST 22362-77: Reinforced concrete structures. Methods for determination of reinforcement tensioning force

GOST 22406-77: Timber elements and products for building. Method of determining conditional water permeability of water protecting finishes and impregnating compounds

GOST 22685-77: Forms for making control samples of concrete. Specification

GOST 22685-89: Moulds for making control specimens of concrete. Specifications

GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing

GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing

GOST 23166-78: Wooden windows

GOST 23173-78: Garden barrows. General technical conditions

GOST 23173-96: Garden wheel barrows

GOST 23265-78: Spectacle lenses. Specifications

GOST 23381-2016: School chairs and chairs for children. Test methods

GOST 23794-84: Single-acting four-crank closed presses. Norms of accuracy

GOST 24033-2018: Windows, doors and gates. Mechanical test methods

GOST 24053-80: Wood particle boards. Details for furniture. Method for determination of warpage

GOST 24434-80: Laminated wall and roof panels with plastic foam thermal insulation. Plastic foams. Method of determining shrinkage

GOST 24581-81: Asbestos-cement sandwich panels with plastic foam thermal insulation. General specifications

GOST 24638-85: Annular diamond drills for reinforced concrete constructions

GOST 24788-2001: Enameled steel kitchen utensils. General specifications

GOST 24788-81: Enameled steel kitchen utensils.

GOST 24866-2014: Insulating glass units. Specifications

GOST 24866-89: Sealed insulating glass units

GOST 24866-99: Sealed insulating glass units. Specifications

GOST 24941-81: Rocks. Methods for determination of mechanical properties by pressing with spherical indentors

GOST 25095-82: Sintered hard metals. Method of determination of elastic modulus (of Young's modulus)

GOST 25250-88: PVC film for production of food and medicine package. Specifications

GOST 25579-83: Modified wood. Method for determination of dimensions stability

GOST 25712-88: Machined steel tyres for tramway cars. Specifications

GOST 25749-2005: Metal winding lids. General specifications

GOST 25749-2020: Metal screw covers. General specifications

GOST 25945-98: Building polymer sealing non-hardening materials and products. Test methods

GOST 26138-84: Elements of built-in furniture and entresol for residential buildings. Specifications

GOST 26220-84: Aerosol aluminum mono-block bulbs

GOST 26250-84: Drill pipes for borehole tools with retrievable core

GOST 26294-84: Normal and high precision renewable jig bushes. Design and dimensions

GOST 26339-84: Annular diamond drills

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 26438-85: Steel moulds for reinforced concrete members. Methods of tests for deformability

GOST 26771-85: Electric micro-motors for toys

GOST 26816-2016: Cement-bonded wood boards. Specifications

GOST 26816-86: Cement-bonded wood boards. Specifications

GOST 26877-2008: Metal products. Methods of measuring form variations

GOST 26877-91: Metal products

GOST 26891-86: Aerosol valves, spray heads and caps

GOST 27002-86: Cooking utensils from corrosion-resistant steel

GOST 27019-2016: Rolled polymer materials for floors. Method of rapid determination of sound-insulation properties

GOST 27019-86: Rolled polymer materials for floors. Method of rapid determination of sound-insulation properties

GOST 27180-2001: Ceramic tiles. Test methods

GOST 27208-87: Cast iron casting. Methods of mechanical testing

GOST 28122-95: Stone-working grinding-polishing machines

GOST 28541-95: Stone-cutting machines

GOST 28985-91: Rocks. Method of determination of deformation characteristics under uniaxial compression

GOST 29078-91: Leather. Spherical tension test method

GOST 30065-93: Hubs for films and magnetic tapes. Specifications

GOST 300-69: Curve meters

GOST 30416-2012: Soils. Laboratory testing. General requirements

GOST 30416-2020: Soils. Laboratory tests. General Provisions

GOST 30416-96: Soils. Laboratory testing. General requirements

GOST 30629-2011: Materials and products facing of rocks. Test methods

GOST 30629-99: Cladding materials and products made of natural stone. Test methods

GOST 30647-99: Casting equipment. Casting machines under low pressure. General specifications.

GOST 30740-2000: Sealing materials used in joints of aerodrome coats. General specifications

GOST 30808-2002: Spectacles lenses. General specifications

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31462-2011: Safety windows. General specifications

GOST 31571-2012: Dental ceramic. Technical requirements. Test methods

GOST 32130-2013: Glass jars for food products of fishing industry. Specifications

GOST 32274-2013: Monostructural fibreboards. Specifications

GOST 32289-2013: Wood particleboards, laminated with paper impregnated with thermosetting resins

GOST 32398-2013: Fireproof Wood Chipboards. Technical Specifications

GOST 32399-2013: Waterproof Wood Chipboards. Technical Specifications

GOST 32586-2013: Vibroinsulators rubber and rubber-reinforced for automotive technic. Specifications

GOST 32603-2012: Three-layered metal panels with mineral wool insulation. Specifications

GOST 32671-2014: Glass containers for baby`s nutrition. General specifications

GOST 32674-2014: Glass containers. Sizes. Control methods

GOST 32729-2014: Automobile roads of general use. The method of measuring elastic deflection to determine the strength of non-rigid pavement

GOST 32803-2014: Self-stressing concrete. General specifications

GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods

GOST 33081-2014: Wooden glued bearing structures. Strength classes of structures elements and methods for its determination

GOST 33082-2014: Timber structures. Methods of determining the bearing capacity of the joints

GOST 33124-2014: Laminated veneer lumber. Specifications

GOST 33185-2014: Bars for insulating joints rails. Safety requirements and testing methods

GOST 33221-2015: Bottles from polyethylene terephthalate for chemical products. General specifications

GOST 33416-2015: Metal rolling covers. General specifications

GOST 33672-2015: Automobile transport facilities. Antiskid studs. Requirements and test methods

GOST 33716-2015: Blanks of boxes and packs. Boxes and packs. Technical specifications

GOST 33756-2016: Plastic consumer packaging. General specifications

GOST 33793-2016: Front facade translucent structures. Methods for determining wind load resistance

GOST 34101-2017: Posuda stal'naya emalirovannaya dlya detej i podrostkov. Tehnicheskie usloviya

GOST 34117-2017: Cookware and tableware made of corrosion-resistant steel for children and teenagers. Technical conditions

GOST 34208-2017: Fiberglass. Mats. Determination of average thickness, thickness under load and recovery after compression

GOST 34264-2017: Polymeric transport containers. General specifications

GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions

GOST 34534-2019: Packaging. Polymer bottles for food liquids. General specifications

GOST 3548-79: Photographic film spool 61,5 mm wide. Specifications

GOST 3916.1-89: Plywood with outer layers of deciduous veneer for general use. Specifications

GOST 3916.2-89: Plywood with outer layers of coniferous veneer for general use. Specifications

GOST 4097-78: Cans for motion-picture rawstock, magnetic tapes and film materials. Specifications

GOST 415-75: Rubber and rubber mixes. Method for determination of plasticity by means of plastometer

GOST 4381-87: Lever-type micrometers. General specifications

GOST 4598-2018: Fibre boards by wet way of production. Specifications

GOST 4598-86: Fibre boards. Specifications

GOST 475-78: Wooden doors. General specifications

GOST 4835-2013: Wheelsets for freight and passenger car. Technical specifications

GOST 5384-89: Knuckle-joint cold stamping presses. Parameters and dimensions. Dimensions and arrangement of the slots and openings for fixing the tools. Norms of accuracy

GOST 5627-87: Automatic wire nail machines. Parameters and dimensions. Norms of accuracy

GOST 5717.1-2003: Glass jars for canned food. General specifications

GOST 5717.1-2014: Glass containers for cannеd food products. General specifications

GOST 5717-91: Jars for preserved food

GOST 6282-88: Plate crank shears with inclined blade. Parameters and dimensions. Norms of accuracy

GOST 6414-87: Automatic five-position nut cold upsetters. Parameters and dimensions. Norms of accuracy

GOST 6809-87: Hot stamping crank presses. Basic parameters and dimensions. Norms of accuracy

GOST 7023-89: Horizontal forging machines with vertical joint of dies. Parameters and dimensions. Norms of accuracy

GOST 713-88: Screw presses. Рarameters and dimensions, norms of accuracy

GOST 7639-88: Straight side double action one point presses. Basic parameters and dimensions. Norms of accuracy

GOST 7661-67: Dial depth gauges. Specifications

GOST 7766-88: Single-acting closed two-crank presses. Parameters and dimensions. Norms of accuracy

GOST 7883-82: Plastic accumulator cases. Specifications

GOST 8.003-71: State system for ensuring the uniformity of measurements. Tool-making microscopes. Methods and means of verification

GOST 8.111-74: The state system for ensuring the uniformity of measurements. Dead-weight compound pressure and vacuum gauges, МВП-2,5 type. Verification methods and means

GOST 8.147-75: State system for ensuring the uniformity of measurements. Measurement tool СЦ type for gear wheel run-out. Verification methods and means

GOST 8.215-2019: State system for ensuring uniformity of measurements. Flat glass plates for interference measurements. Verification Method

GOST 8.336-78: State system for ensuring the uniformity of measurements. ИЗМ type optical mechanical length measuring machines. Methods and means of calibration

GOST 8.340-78: State system for ensuring the uniformity of measurements. Dead-weight tester type МП-0,4 methods and means of verification

GOST 8.342-79: State system for ensuring the uniformity of measurements. Hole gauges graduated in 0,001 and 0,002mm. Methods and means of verification

GOST 8.411-81: State system for ensuring the uniformity of measurements. Lever micrometres. Rules and procedure of verification

GOST 8.548-86: State system for ensuring the uniformity of measurements. Clock-type dial indicators graduated in unit divisions of 0,01mm. Procedure of verification

GOST 8136-85: Active aluminum oxide

GOST 8200-87: Hydraulic presses for plastic. Parameters and dimensions. Norms of accuracy

GOST 8248-88: Round, flat, section cutting сrank shears closed construction. Parameters and dimensions accuracy norms

GOST 8260-88: Sheet stamping multiposition automatic press. Parameters and dimensions. Norms of accuracy

GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests

GOST 8673-82: Plywood boards. Specifications.

GOST 8673-93: Plywood panels

GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications

GOST 8829-2018: Prefabricated reinforced concrete and concrete products. Load test methods. Rules for evaluating strength, stiffness and crack resistance

GOST 8829-85: Prefabricated reinforced concrete structures and elements. Methods of testing and estimation of strength, rigidity and resistance to cracking

GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance

GOST 9.019-74: Unified system of corrosion and ageing protection. Aluminium and magnesium alloys. Accelerated test methods for corrosion crocking

GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications

GOST 929-59: Slabs of asbestos cement, flat, for facing

GOST 9408-89: Simple action open single crank presses. Parameters and dimensions. Norms of accuracy

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9753-88: Hydraulic gap presses. Parameters and dimensions. Norms of accuracy

GOST 9784-75: Organic sheet glass for illuminating engineering. Specifications

GOST 9861-88: Four-station cold-formers for timber articles of rod type. Parameters and dimensions norms of accuracy

GOST R 50.05.08-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control

GOST R 50428-92: Hubs for films and magnetic tapes. Specifications

GOST R 50838-95: Polyethylene pipes for the supply of gaseous fuel. Specifications

GOST R 50962-96: Plastics vessels and articles for economic purposes. General specifications

GOST R 51044-97: Spectacle lenses. General specifications

GOST R 51735-2001: Dental ceramic. Technical requirements. Test methods

GOST R 51760-2001: Polymeric consumers packagings. General specifications

GOST R 51760-2011: Polymeric consumer's containers. General specifications

GOST R 51970-2002: Ski-poles for walk and sport race skiing. Specifications

GOST R 52078-2003: Wood particle boards, laminated with paper impregnated with thermosetting resins

GOST R 52123-2003: Port-holes for diving hyperbaric chambers with operating pressure up to 4,9 MPa (50 kgf/sq cm). General specifications

GOST R 52203-2004: Tubing and coupling. Specifications

GOST R 52327-2005: Glass containers for children's food. Specifications

GOST R 52419-2005: Carbide tipped shell-type milling cutters for machining wood materials and plastics. Specifications

GOST R 52589-2006: Carbide tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements

GOST R 52590-2006: Superhard tipped end milling cutters for machining wood materials and plastics. Specifications and safety requirements

GOST R 52620-2006: Transport polymeric containers. General specifications

GOST R 52752-2007: Formworks. Test methods

GOST R 52781-2007: Grinding and tool-grinding wheels. Specifications

GOST R 53208-2008: Monostructural fibreboards. Specifications

GOST R 53832-2010: Vehicles. Heat exchangers and thermostats. Technical requirements and test methods

GOST R 53923-2010: Diamond and cubic boron nitride (elbor) grinding wheels. Specifications

GOST R 53926-2010: End milling cutters with shell-type inserted blades for woodcutting. General specifications

GOST R 53927-2010: Shell-type inserted blade circular cutterbloks for woodcutting. General specifications

GOST R 54155-2010: Enamelled steel kitchen utensils for children and teenagers. Specifications

GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications

GOST R 54175-2010: Sealed insulating glass units. Specifications

GOST R 54470-2011: Glass containers for canned food products. General specifications

GOST R 54489-2011: Circular saws for cutting logs machines and automatic lines. General technical requirements

GOST R 54490-2011: Superhard tipped circular saws for machining wood materials and plastics. General specifications

GOST R 54923-2012: Polymer composite wall ties for multilayer envelope buildings. Specifications

GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications

GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure

GOST R 56178-2014: Modifiers of organic-mineral origin of MB type for concretes, mortars and dry mixes. Specifications

GOST R 56578-2015: Mounted wheels. Specifications

GOST R 56593-2015: Mineral admixtures for concretes and mortars. Test methods

GOST R 56613-2015: Production of non-combustible and rotting modified wood. Specifications

GOST R 56687-2015: Protection of concrete and reinforced-concrete construction from corrosion. Test method of sulphate resistance of concrete

GOST R 56727-2015: Self-stressing cements. Specifications

GOST R 57430-2017: Pipes, fitting from ductile iron with spherical graphite and their connections for trade oil pipelines. Specifications

GOST R 57790-2017: Timber bearing structures. Methods of strength and deformability testing

GOST R 57852-2017: Composites. Method for determination of test specimens bending under tensile and compressive forces application

GOST R 57978-2017: Grinding wheels for cutting-off. Specifications

GOST R 58406.8-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Determination of resistance to plastic flow by the Marshall method

GOST R 58558-2019: Wooden structures. Glued rods Test methods for determining standard values ​​of mechanical characteristics

GOST R 58559-2019: Wooden structures. Metal gear keys. Test methods

GOST R 58562-2019: Wooden structures. Metal ring keys. Test methods

GOST R 58755-2019: Mobile scaffolds, collapsible. Technical specifications

GOST R 58758-2019: Platforms and stairs for construction works. General specifications

GOST R 58900-2020: Bent steel sheet profiles with trapezoidal corrugations for construction. Load-bearing test method

GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications

GOST R ISO 230-1-2010: Machine tools tests. Part 1. Measurement techniques of geometrics parameters

GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions

I 23 SD-80*: Instructions for flaw detection of pipe bends made of pearlite steel

Manual: Manual for impulse and low consumption fire extinguishing systems

MI 129-77: State system for ensuring uniformity of measurements. Method of calibration of pressure-gage model pressure gauges with measuring multiplier of accuracy classes 0, 1 and 0, 2

MI 1673-87: State system for ensuring uniformity of measurements. Stakes and supports for gage heads. Methods of control

MI 1724-87: Guidelines. State system for ensuring uniformity of measurements. Thickness gauge indicator with the price division of 0.01 and 0.1 mm. Method of verification

MI 1812-87: Gages threaded tapered. Methods of control

MI 1825-88: Guidelines. GSE. Measuring projectors. Method of verification

MI 1903-97: Recommendation. State system for ensuring uniformity of measurements. Standards for coating thickness. Method of verification

MI 1927-88: Recommendation. Calibers are smooth for cylindrical shafts and holes

MI 1937-88: Gauges for taper connections. Methods of control

MI 1971-95: Recommendation. State system for ensuring uniformity of measurements. Verification based on the scales of the state body. Methods of verification

MI 2006-89: State system for ensuring uniformity of measurements. Depth gauge indicators. Verification procedure

MI 2192-92: State system for ensuring uniformity of measurements. Indicators of the watch type with a division value of 0.01 mm. Method of verification

MI 2193-92: Inside calipers, with a scale division of 0.001 and 0.002 mm.

MI 2194-92: State system for ensuring uniformity of measurements. Nutromera indicator with the price of division of 0.01 mm. Methods of verification

MI 2203-92: Recommendation. State system for ensuring uniformity of measurements. Test methods for measuring pressure. Datasheets

MI 2314-2000: Recommendation. GSOEI. Codifier of groups of measuring instruments

MI 2585-2000: State system for ensuring uniformity of measurements. Diaphragm measuring piping. Primary calibration technique

MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices

MI 297-83: State system for ensuring uniformity of measurements. Device for measuring the average diameter of the internal thread of the IP-9. Methods and means of verification

MI 481-84: Guidelines. Dial Indicator with Damping Device. Model ICh 10MD. Methods and means of verification

MI 557-84: Dead weight portable gage MPP-60 of class 0.05. Verification procedure

MU 0397-00.002: Non-Destructive Testing Methodology for VE-50 and VP-50 Swivels

MU 342: Methodical instructions. The device for checking PPI-3 indicators. Methods and means of verification

NB ZhT TsP 142-2003: Covers with polymeric coating for insulating joints of railway rails. Safety standards

ODM 218.3.023-2012: Guidelines for determining the elastic modulus of a pavement using a static hard stamp

ODM 218.3.096-2017: Guidelines for the volumetric design of asphalt mixtures according to the Marshall Methodology

ODM 218.5.007-2016: Guidelines for determining the modulus of elasticity of a static stamp

OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.

OST 35-26.0-86: Ceramsite concrete room units for transport construction. General technical requirements.

PI 1.4.75-2000: Arc welding in shielding gases of structural, stainless and heat-resistant steels and alloys

PI 249-2000: Riveting of metal structures. application

PNAE G-7-016-89: Standardized methods of control of basic materials (semifinished products), welded joints and cladding of equipment and of pipelines of NPP. Visual and a measuring control

PNST 109-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method for determination of resistance to plastic flow of cylindrical samples at Marshall installation

PNST 306-2018: Automobile roads of general use. Organo-mineral cold mixes with addition of recycled asphalt concrete pavement (RAP). Specifications

PNST 311-2018: General automobile roads. Deformability indicators of structural layers of pavement from incoherent materials and subgrade soil. Technical requirements and determination methods

PNST 362-2019: General automobile roads. Cold asphalt mixes and asphalt mixes. Technical conditions

PR 32.131-98: Rules for Metrology. Typical training program for calibrators measuring instruments of geometric quantities in railway transport

R 3112199-0254-92: Time sheet of technological equipment for ATP of various capacities of TC and BTW

R 50.2.024-2002: National System for Standardization of Measurements. Theodolites and Other Geodetic Survey Instruments. Verification Methods

RD 08-195-98: Instructions for the technical diagnosis of the state of mobile units for well repair

RD 15-13-2008: Guidelines for the examination of industrial safety of compressor installations used in coal mines and mines

RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators

RD 153-34.0-45.510-98: Model Guidelines for Operation and Repair of Slip Rings and Brushes of Turbine Generators with Power of 63 MW and Above

RD 22-28-32-94: Album of cards of standard technological processes for repair by methods of welding and building-up of nodes of load-lifting cranes

RD 24.023.52-90: Products of chemical engineering. Gumming. Typical technological process.

RD 31.21.29-85: Test procedure for marine diesel power plants under operating conditions

RD 32 TsT 526-2005: Medium and current TP-3 repairs of mainline diesel locomotives TEP70, 2TE10 in/and 2TE116, M62, M62U, M62UK. Technological equipment regulations

RD 32 TsT 527-2005: Medium and current TR-3 repairs of shunting locomotives TEM2, TEM2U, TEM7, CHME3. Technological equipment regulations

RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations

RD 34.30.506-90: Procedural Guidelines for Standardization of Thermal Expansion of Steam Turbine Cylinders at Thermal Power Stations

RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment

RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul

RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm

RD 34.41.601: Guide to Overhaul of Mud Pumps

RD 34.45.614: Guide to Overhaul of Turbine Generators TVF-120-2 and TVF-100-2

RD 50-274-81: Methodological instructions. Dynamometers for variable forces ДПС. Methods and means of verification.

RD 50-411-83: Methodological instructions. liquids and gases flow rate. Measurement technique using special orifices.

RD 50-98-86: Methodological instructions. Selecting universal means of dimensional measurement up to 500 mm (application as per GOST 8.051-81).

RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI

RST RSFSR 131-87: Metal folding beds. Technical conditions

RTM 108.021.02-85: Steam and gas turbines. Thermal testing of shafts, shafts with discs and rotors

RTM 68-14.33-91: Manufacturing technology of plastic globes with a diameter of 210 mm

ST RK 1518-2006: Diesel locomotives. DC electric rotating traction machines. Requirements for acceptance programmes and test procedures

ST RK 242-92: Blanks for boxes and packs. Boxes and packs. Specification

ST RK GOST R 50962-2008: Dishware and household products of plastic. General specification

ST SSFZhT TsP 107-2001: Crushed stone from natural stone for the ballast layer of the railway track. Typical test method.

ST SSFZhT TsP 112-2001: Composite linings for the joints of insulating rails. Typical methodology for conducting field testing.

ST SSFZhT TsT 046-99: Shaft cardan main drive diesel locomotives and diesel trains. Typical test method

ST TsKBA 083-2010: Pipe fittings. Multi-layer bellows of alloy VT1-0. General technical conditions

ST TsKBA 083-2016: Pipeline fittings. Multi-layered bellows made of alloy ВТ1-0. General technical specifications

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

STB 1015-97: Cultural and general, and household products made of plastic. General specifications

STB 1517-2004: Plastic consumer packaging. General specifications

STB 1566-2005: Roads automobile. Test methods

TR 94.07-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 07: Roofing Installation

TR 94.08-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 08: Waterproofing of Sub-Grade Portions of Buildings

TU 035-178-86: Saws disk for pieces of pipes and bent profiles. Technical conditions for the experimental batch

TU 2248-048-00203536-98: Polyethylene pipes for high pressure gas pipelines (up to 1, 2 MPa). Technical conditions

TU 26-01-949-85: The devices gummed with the mechanical mixing device of volume 1; 2; 3.2; 6.3; 10 and 16 m3

TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

TU 35-1757-87: Buildings spanning railway bridges with riding on top on the ballast of box section Lp = 33.6 m; 45.0 m. Specifications

TU 68-2.211-91: Plastic globe (diameter 210 mm). Technical conditions

TU 9462-001-53908805-2006: Glass syringe filling ampoules for medicines

TU 9462-001-84299122-2010: Ampoules medical colorless and brown from glass of the 1st hydrolytic class

TU 9557-010-02570823-97: Cartographic products. Plastic globe (diameter 320 mm)

UO 38.12.007-87: Centrifugal compressors. General technical conditions for repairs

VSN 57-88(r): Ordinance on Technical Inspection of Residential Buildings

Customers Who Viewed This Item Also Viewed:

Steel structures
Language: English
Price: $297.00
Technical regulations of the Eurasian Economic Union "On requirements for fire safety and fire extinguishing means"
Language: English
Price: $126.72
Concrete with polysterene aggregates. Specifications
Language: English
Price: $308.76
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Language: English
Price: $301.95
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Language: English
Price: $287.10
Seismic building design code
Language: English
Price: $594.00
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
Language: English
Price: $150.66
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Language: English
Price: $819.95
Safety valves of stream and hot-water boilers. Technical requirements
Language: English
Price: $57.42
Steam and hot-water boilers
Language: English
Price: $47.52
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $173.25
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Buildings and structures foundations
Language: English
Price: $495.00
Pile foundations
Language: English
Price: $519.75
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
Language: English
Price: $37.62
General requirements for machines, instruments and other industrial products as to environment mechanical stability
Language: English
Price: $175.23
Safety rules for ground storage of liquid ammonia
Language: English
Price: $145.53
Radio communications. Broadband wireless access equipment. Requirements for the radio spectrum parameters, electromagnetic compatibility and safety
Language: English
Price: $1,318.92

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!