GOST 8026-92
ГОСТ 8026-92
|
|
Levelling rules. Specifications
Линейки поверочные. Технические условия
Status: Effective
The standard applies to the test ruler of steel, cast iron and hard rock (granite ruler) up to 4000 mm
Стандарт распространяется на поверочные линейки из стали, чугуна и твердокаменных пород (гранитные линейки) длиной до 4000 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
3/22/1992
SKU: RUSS59249
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.040 Linear and angular measurements »
17.040.30 Measuring instruments »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P5 Instruments, tools and devices for linear, angular, profile and spatial measurements »
P52 Instruments and tools for controlling roughness, shape and location of surfaces »
National Standards for OKSTU »
TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS »
Tool for checking straightness, flatness and squareness »
As a Replacement Of:
GOST 8026-75: Levelling rules. Types. The main parameters. Technical requirements
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage
GOST 1412-85: Flakish graphite cast iron
GOST 1435-90: Unalloyed tool steel bars, strips and coils
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 7293-85: Cast iron with globular graphite for foundry
GOST 801-78: Bearing steel. Specifications
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9396-88: Boxes wooden reusable
MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification
The Document is Referenced By:
GOST 1005-86: Wooden plank panels for the factory-made timber frame houses
GOST 10092-75: Cupro-nickel tubes for heat-exchanging apparatus. Specifications
GOST 10498-82: Seamless extra thin-walled tubes of corrosion-resistant steel
GOST 10632-2007: Wood particle boards. Specifications
GOST 10632-2014: Wood particle boards. Specifications
GOST 10632-89: Wood particle boards
GOST 10674-2022: Tank wagons. General specifications
GOST 10703-73: Aluminium sheets for graphic arts industry. Specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions
GOST 10739-84: Automatic sheet stamping presses with underheath drive. Parameters and dimensions. Norms of accuracy
GOST 10767-87: Automatic machines for thermoplastic and thermosofting materials. Parameters and dimensions. Norms of accuracy
GOST 10767-98: One position thermoplast and thermosetting plastic working automatic machines. Basic parameters and dimensions. Norms of accuracy
GOST 10935-2019: Cargo freight cars. General specifications
GOST 10935-2022: Covered freight cars. General specifications
GOST 11017-80: High-pressure seamless steel pipes
GOST 11047-90: Wood details and articles for one-two storey dwelling and public buildings
GOST 11068-81: Electric-welded pipes from corrosion-resistant steel
GOST 11249-80: Steel rolled up soldered double-layer tubes
GOST 11647-75: Combined press-shears and combined shears. Norms of accuracy
GOST 11897-94: Tripods for geodetic instruments. General technical requirements and methods of tests
GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications
GOST 13083-2016: Rods of nickel and nickel-silicon alloys. Specifications
GOST 13083-77: Rods of nickel and nickel-silicon alloys. Technical requirements
GOST 13494-80: Geodetic protractors
GOST 13548-2016: Thin-walled tubes of nickel and nickel alloys. Specification
GOST 13548-77: Thin-walled tubes of nickel and nickel alloys
GOST 13663-86: shaped steel pipes technical requirements
GOST 13726-97: Aluminium and aluminium alloys strips. Specifications
GOST 14162-79: Steel tubes of small dimensions (capillary)
GOST 15031-69: Contact instruments КПУ-3. Methods and means of verification
GOST 15040-2016: Oxygen-free copper pipes. Specification
GOST 15040-77: Oxygen-free copper pipes
GOST 15066-78: Foundry moulding machines. Norm of accuracy
GOST 1525-2015: Rods of monel. Specifications
GOST 1535-2006: Copper rods. Specifications
GOST 1535-2016: Copper rods. Specifications
GOST 15835-2013: Beryllium bronze bars. Specifications
GOST 15835-70: Beryllium bronze bars. Specifications
GOST 16277-2016: Separate rail fasteners. Specification
GOST 16509-89: Swing beam sheet-bending machines. Parameters and dimensions. Standards of accuracy
GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications
GOST 17232-79: Aluminium and aluminium alloys plates. Technical conditions
GOST 17232-99: Aluminium and aluminium alloys plates. Specifications
GOST 17327-95: Bread baking forms
GOST 18097-93: Screw-cutting lathes and lathes. Basic dimensions. Standards of accuracy
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 18128-2018: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 18128-82: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 18326-87: Low-alloyed zinc sheets for one-stage and multistage etching. Specifications
GOST 18578-89: Builders axes. Specifications
GOST 19147-82: Skiing sticks. Specifications
GOST 19277-2016: Seamless steel pipes, cold-deformed for oil and fuel pipelines. Specification
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 2060-90: Brass rods. Specifications
GOST 20707-80: Copper and brass ribbons for radiators. Specifications
GOST 20850-2014: Wooden glued load bearing structures. General specifications
GOST 21028-75: Jigs for machining holes of moulding boxes and pattern plates. Specifications
GOST 2132-2015: Nickel anodes. Specifications
GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications
GOST 21519-2003: Windows of aluminium. Specifications
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.
GOST 21945-76: Seamless hot-rolled pipes from titanium-based alloys
GOST 21990-76: Magnesium and magnesium alloys plates. Specifications
GOST 21996-76: Cold-rolled heat treated steel-cord belt
GOST 22178-76: Titanium and titanium alloys sheets. Specifications
GOST 22233-93: Extruded sections of aluminium alloys for enclosure building structures. General specifications
GOST 22366-93: Iron-based sintered filler ribbon electrode
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 22897-86: Seamless cold-deformed pipes from alloys based on titanium. Specifications
GOST 23166-78: Wooden windows
GOST 23270-89: Tube-billets for machining
GOST 23342-2012: Architectural-building goods of the natural stone. Specifications
GOST 23342-91: Natural stone architectural details. Specifications
GOST 23668-79: Stone blocks for road surfaces. Specifications
GOST 23747-2015: Door blocks of aluminium profiles. Specifications
GOST 24045-2010: Steel sheet cold-formed sections with trapezoidal corrugations for building. Specifications
GOST 24045-2016: Steel sheet clad-formed sections with trapezoidal corrugations for building specifications
GOST 24045-94: Steel shaped sheets with trapezoid corrugations for construction
GOST 24053-80: Wood particle boards. Details for furniture. Method for determination of warpage
GOST 24303-80: Kitchen cookware, made of the ferrous and nonferrous metals
GOST 24581-81: Asbestos-cement sandwich panels with plastic foam thermal insulation. General specifications
GOST 24767-2018: Aluminium and aluminium alloys cold-formed sections for enclosing structures. Specifications
GOST 24767-81: Aluminium and aluminium alloys cold-formed sections for wall and roof structures. Specifications
GOST 24788-2018: Enamelled steel kitchen utensils. General specifications
GOST 25001-81: Rolled-welded aluminium sheet billets for heat-exchangers. Specifications
GOST 25088-98: Ship's doors. Specifications
GOST 25309-94: Covers of access hatches. Specifications
GOST 25310-94: Covers of skylights. Specifications
GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications
GOST 25782-90: Derbies, floats, semifloats. Specifications
GOST 26138-84: Elements of built-in furniture and entresol for residential buildings. Specifications
GOST 26221-84: Scattering suppressing linear rasters for medical roentgen apparatuses
GOST 2622-2016: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications
GOST 2622-75: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications
GOST 26250-84: Drill pipes for borehole tools with retrievable core
GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements
GOST 26686-2022: Flatcars. General specifications
GOST 26725-2022: Open wagons. General technical conditions
GOST 26756-2016: Furniture for trade enterprises. General technical conditions
GOST 26816-2016: Cement-bonded wood boards. Specifications
GOST 26816-86: Cement-bonded wood boards. Specifications
GOST 26877-2008: Metal products. Methods of measuring form variations
GOST 26877-91: Metal products
GOST 26892-86: Wood doors. Method of testing for the resisters to impact load in the direction of opening
GOST 27180-2019: Ceramic tiles. Test methods
GOST 28015-89: One-layer wooden floor panels. Technical requirements
GOST 2848-75: Tapers of tools. Tolerances. Methods and means of control
GOST 28637-90: Bristle brush articles. Check methods
GOST 28924-91: Grinding materials. Test methods of physical and physical-mechanical properties
GOST 30198-94: Sport (racing) skis. Specifications
GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications
GOST 30272-96: Black collar axles (profile stock) for 1520 mm gauge railways. Specifications
GOST 30369-96: Stone milling machines General technical requirements and control methods
GOST 30466-98: Household kitchen appliances with external warmth supply. Safety requirements and test methods
GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods
GOST 30552-98: Round billets (non-machined axles) of railway wheels for 1520 mm gauge line. Allowances and tolerances
GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications
GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications
GOST 30647-99: Casting equipment. Casting machines under low pressure. General specifications.
GOST 30673-2013: Polyvinylchloride profiles for windows and doors. Specifications
GOST 30674-99: Windows of polyvinylchloride profiles. Specifications
GOST 30698-2000: Glass tempered for building. Specifications
GOST 30762-2001: Refractory products. Methods of measuring geometrical dimensions, defects of shape and surfaces
GOST 30970-2002: Doors of polyvinylchloride profiles. Specifications
GOST 30970-2014: Door blocks of polyvinylchloride profiles. Specifications
GOST 31.111.41-93: Parts and assembly units of universal assembly devices for metal-cutting machines. Basic parameters. Constructive elements. Norms of accuracy
GOST 31.211.41-93: Parts and assembly units of collapsible fixtures for assembly and welding
GOST 31173-2003: Steel doors. Specifications
GOST 31173-2016: Steel doors. Specifications
GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications
GOST 31462-2011: Safety windows. General specifications
GOST 3191-93: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications
GOST 32274-2013: Monostructural fibreboards. Specifications
GOST 32289-2013: Wood particleboards, laminated with paper impregnated with thermosetting resins
GOST 32304-2013: Laminate flooring based on dry process wood fibreboards. Specifications
GOST 32309-2013: Casting utensils of aluminium alloys. General specification
GOST 32398-2013: Fireproof Wood Chipboards. Technical Specifications
GOST 32399-2013: Waterproof Wood Chipboards. Technical Specifications
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 32567-2013: Wood boards with oriented particles. Specifications
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 32658-2014: Polymer composites. Determination of mechanical properties in the plane of shear reinforcement by a tensile test at an angle of ± 45 degree
GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.
GOST 32694-2014: Plates for spike fastening of railway. Specifications
GOST 32931-2015: Profile steel pipes for metal constructions. Specifications
GOST 32942-2022: Prestressed reinforced concrete beams for switches. General specifications
GOST 32956-2014: Public roads. Trays for road drainage. Methods of control
GOST 32962-2014: Automobile roads of general use. Kerb units. Control methods
GOST 33120-2014: Glued timber structures. Methods for determining strength of glue joints
GOST 33121-2014: Glued timber structures. Methods for determining the resistance of glue joints to the temperature and humidity effects
GOST 33228-2015: Steel welded pipes for general purposes. Specifications
GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C
GOST 33529-2015: Band saws with cutting elements, welded stellate. Specification
GOST 33535-2015: Connections and crossings of railway tracks. Specifications
GOST 33722-2016: Switches of turnouts. General specifications
GOST 34349-2017: Glued timber structures. Methods for determining of glue joints long-term strength
GOST 34525-2019: Stainless steel sinks. Technical conditions
GOST 34664-2020: Thermite-welded railroad rails. Specifications
GOST 34665-2020: Electro-welded railway rails. Specifications
GOST 3910-75: Refractory silica products for brickwork of glassmaking furnaces. Specifications
GOST 4134-2015: Copper alloys sections for collectors of electrical machines. Specifications
GOST 4134-75: Copper alloys sections for collectors of electrical machines. Specifications
GOST 4598-2018: Fibre boards by wet way of production. Specifications
GOST 4598-86: Fibre boards. Specifications
GOST 475-2016: Door Blocks wooden and combined. General specifications
GOST 475-78: Wooden doors. General specifications
GOST 4981-87: Wooden joists. Specifications
GOST 5005-82: Electric-welded cold-worked steel pipes for cardan shafts
GOST 5040-78: Light-weight heat-insulating refractory and high-refractory products. Specifications
GOST 529-2015: Radiator tubes. Specifications
GOST 529-78: Radiator tubes
GOST 5384-89: Knuckle-joint cold stamping presses. Parameters and dimensions. Dimensions and arrangement of the slots and openings for fixing the tools. Norms of accuracy
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5654-76: Steel seamless hot-shaped pipes for shipbuilding
GOST 5973-2022: Dumper cars. General specifications
GOST 6238-77: Casing pipes and core barrels for prospecting drilling and nipples to them
GOST 631-75: Upset drill pipes with couplings
GOST 6428-2018: Gypsum tongue-and-groove blocks for partitions. Specifications
GOST 6532-77: Band saws for sawing of wood. Specifications
GOST 6688-2016: Brass bars of rectangular section. Specifications
GOST 6688-91: Brass bars of rectangular section. Specifications
GOST 6809-87: Hot stamping crank presses. Basic parameters and dimensions. Norms of accuracy
GOST 7023-89: Horizontal forging machines with vertical joint of dies. Parameters and dimensions. Norms of accuracy
GOST 713-88: Screw presses. Рarameters and dimensions, norms of accuracy
GOST 7286-81: Wooden T-squares. Specifications
GOST 7370-2015: Railway frogs. Specifications
GOST 7639-88: Straight side double action one point presses. Basic parameters and dimensions. Norms of accuracy
GOST 78-2004: Wooden sleepers for full gauge railways. Specifications
GOST 7909-56: Drill prospecting pipes and coupling to them
GOST 8.003-2010: State system for ensuring the uniformity of measurements. Tool-making microscopes. Verification procedure
GOST 8.046-2010: State system for ensuring the uniformity of measurements. Optical dividing heads. Verification procedure
GOST 8.215-2019: State system for ensuring uniformity of measurements. Flat glass plates for interference measurements. Verification Method
GOST 8.393-2010: State system for ensuring the uniformity of measurements. Optical Quadrants. Verification procedure
GOST 8.420-2002: State system for ensuring the uniformity of measurements. State verification schedule for means of measuring straightness and flatness deviation
GOST 800-78: Bearing tubes. Technical requirements
GOST 8242-88: Profiled details from wood and wood materials for building. Specifications
GOST 8260-88: Sheet stamping multiposition automatic press. Parameters and dimensions. Norms of accuracy
GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength
GOST 8467-83: Steel drill pipes with
GOST 862.1-2020: Parquet products. Massive parquet. Technical conditions
GOST 862.1-85: Floor parquet production. Block parquet. Technical requirements
GOST 862.2-85: Floor parquet products. Mosaic parquet. Specifications
GOST 862.3-2020: Parquet products. Multilayer parquet. Technical conditions
GOST 862.3-86: Floor parquet products. Parquet boards. Technical requirements
GOST 862.4-2020: Parquet products. Parquet shields. Technical conditions
GOST 862.4-87: Floor parquet products. Parquet panels. Technical requirements
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications
GOST 8816-2003: Wooden cants for switch assemblies of wide gauge railways. Specifications
GOST 8894-2018: Glass pipes. Specifications
GOST 8894-86: Glass pipes and shaped parts thereto
Technical requirements
GOST 9272-2017: Hollow glass blocks. Specifications
GOST 9272-81: Hollow glass blocks. Specifications
GOST 9408-89: Simple action open single crank presses. Parameters and dimensions. Norms of accuracy
GOST 9416-83: Building levels. Technical requirements
GOST 9479-2011: Blocks of rocks for the production of facing, architectural and construction, memorial and other products. Technical conditions
GOST 9479-84: Natural stone blocks for facing products. Technical requirements
GOST 9479-98: Rock blocks used for manufacture of facing, architectural and building, memorial and other products. Specifications
GOST 9480-2012: Plates facing from a natural stone. Technical conditions
GOST 9480-89: Sawn facing slabs of stone. Specifications
GOST 9753-88: Hydraulic gap presses. Parameters and dimensions. Norms of accuracy
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-2022: Cold-deformed seamless pipes made of corrosion-resistant high-alloy steels. Technical conditions
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
GOST R 50278-92: Drill pipes with weld-on tool joints. Specifications
GOST R 50742-95: Cartridges for gas pistols, revolvers, shoot devices and gas tubeless arms. Safety requirements. Types and methods of control during safety certification tests
GOST R 51162-98: Casting aluminium utensils. General specifications
GOST R 51222-98: Equipment for bank protection. Venetian blinds. General specifications
GOST R 51245-99: Steel universal drill rods. General specifications
GOST R 51573-2000: Tubes from alloyed brasses for heat-exchange apparatus. Specifications
GOST R 51682-2000: Casing and coring tubes for geology-exploring drilling. Specifications
GOST R 51685-2013: Railway rails. General specifications.
GOST R 51886-2002: Signal cartridges. General technical requirements and test methods
GOST R 51924-2002: Double tube core barrel for exploration drilling. General technical specifications
GOST R 51970-2002: Ski-poles for walk and sport race skiing. Specifications
GOST R 52078-2003: Wood particle boards, laminated with paper impregnated with thermosetting resins
GOST R 52116-2003: Utensils of cast-iron. General specifications
GOST R 52203-2004: Tubing and coupling. Specifications
GOST R 52502-2005: Venetian blinds-rollets. General specifications
GOST R 52502-2012: Venetian metals blinds-rollets. Specifications
GOST R 52707-2007: Refractories for steel pouring. Refractory products for slide gates of casting ladles. Specifications
GOST R 53065.1-2008: Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature. Part 1. Test without packings
GOST R 53065.2-2008: Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature. Part 2. Test with packings
GOST R 53208-2008: Monostructural fibreboards. Specifications
GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications
GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications
GOST R 54157-2010: Profile steel pipes for metal constructions. Specifications
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54253-2010: Carbon materials. Test method for linear thermal expansion coefficient
GOST R 54254-2010: Carbon materials. Test method for thermal conductivity at room temperature
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54864-2016: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54929-2012: Steel welded pipes for general purposes. Specifications
GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C
GOST R 55647-2013: Copper and copper alloys trolley wires for electric railways. Specifications
GOST R 55647-2018: Copper and copper alloy trolley wires for electric railways. Specifications
GOST R 55820-2013: Switch and crossing rails. Specifications
GOST R 56030-2014: Pipes for details of bearings. Technical specifications
GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure
GOST R 56207-2014: Slabs and tiles of engineered stone on the basis of natural quartz. Specifications
GOST R 56309-2014: Oriented strand wood construction boards. Specifications
GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications
GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications
GOST R 56613-2015: Production of non-combustible and rotting modified wood. Specifications
GOST R 57423-2017: Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6, 4 MPa and temperatures exceeding 400 °C. Specifications
GOST R 57430-2017: Pipes, fitting from ductile iron with spherical graphite and their connections for trade oil pipelines. Specifications
GOST R 57685-2017: Polymer composites. Determination of tension mechanical characteristics of continuous filament carbon and graphite fiber tows
GOST R 58064-2018: Steel welded pipes for building structure. Technical specifications
GOST R 58153-2018: Roofing profiled metal sheets (metal tile). General specifications
GOST R 58360-2019: Dish-shaped anchors for fastening a heat-insulating layer in facade heat-insulating composite systems with external plaster layers. Test methods
GOST R 58385-2019: Cold-rolled steel profiles for construction. Technical specifications
GOST R 58514-2019: Building levels. Technical conditions
GOST R 58519-2019: Rules, graters and graters. Technical conditions
GOST R 58615-2019: Wooden sleepers for broad gauge railways. Technical specifications
GOST R 58683-2019: Doors are ship internal fire-retardant type "B". General technical requirements
GOST R 58685-2019: Permeable ship doors. Test Methods and Types
GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions
GOST R 58700-2019: Wooden windows and balcony doors for low-rise residential buildings. Types, Design and Dimensions
GOST R 58774-2019: The external walls are frame-sheathed self-supporting and non-bearing with a frame made of cold-rolled steel galvanized profiles. General specifications
GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications
GOST R 59620-2022: Public roads. Spherical (spherical segmental) combined bearing parts for bridge structures. General specifications
GOST R 59687-2022: Metal panels with foam insulation. General technical specifications
GOST R 59689-2022: Three-layer chrysotile cement panels with foam insulation. General technical conditions
GOST R 59784-2022: Cross-laminated wood boards. Methods for determination of strength and elastic characteristics
GOST R 70192-2022: Dry frame cladding frame ceilings. Steel cold-formed galvanized steel frame flooring system. General technical requirements
GOST R 70215-2022: Shipboard furniture and non-mechanical room equipment. Norms and test methods
GOST R 70306-2022: Centrifuged reinforced concrete columns of circular section for industrial buildings and engineering structures. Technical specifications
GOST R 70434-2022: Polymeric profiled flexible protective and drainage materials. General technical conditions
GOST R 70463-2022: Four- and six-axle flatcars. General specifications
GOST R 70731.1-2023: Steel pipes for manufacturing of equipment and pipelines for nuclear power plants. General specifications. Part 1. Seamless steel pipes of non-alloy and alloy steels.
GOST R 70731.2-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 2. Seamless steel pipes from austenitic class steel of 08Х18Н10Т and 08Х18Н10Т-Ш grades
GOST R 70731.3-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel
GOST R 70731.4-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of 08Х18Н10Т austenitic class steel.
GOST R ISO 230-1-2010: Machine tools tests. Part 1. Measurement techniques of geometrics parameters
MI 1382-86: Guidelines. Protractor pendulum. Type ZURI-M. Method of verification
MI 1384-86: GSE. Caliper with a handout model 124. Calibration method
MI 1532-86: Guidelines. GSE. Levels frame and squared for mechanical engineering. Method of verification
MI 1585-86: Guidelines. GSE. Device type 2URI. Method of verification
MI 1673-87: State system for ensuring uniformity of measurements. Stakes and supports for gage heads. Methods of control
MI 1724-87: Guidelines. State system for ensuring uniformity of measurements. Thickness gauge indicator with the price division of 0.01 and 0.1 mm. Method of verification
MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification
MI 1782-87: GSI. Calibration procedure
MI 1799-87: Guidelines. Squares testing 90 degrees. Control method
MI 1825-88: Guidelines. GSE. Measuring projectors. Method of verification
MI 1848-88: Methods of verification. GSI: Folding metallic and wooden meters. Calibration procedure
MI 1937-88: Gauges for taper connections. Methods of control
MI 1958-89: State system for ensuring uniformity of measurements. Optimetry. Method of verification
MI 2006-89: State system for ensuring uniformity of measurements. Depth gauge indicators. Verification procedure
MI 2007-89: State system for ensuring uniformity of measurements. Testing and marking plates. Method of verification
MI 2018-89: State system for ensuring uniformity of measurements. Micrometric depth gauges. Method of verification
MI 2066-90: Sets of accessories to plane-parallel end measures of length
MI 2077-90: Micrometers with inserts
MI 2131-90: Goniometers with nonius
MI 2190-92: State system for ensuring uniformity of measurements. Shtangenreysmasy. Method of verification
MI 2196-92: Depth gauges
MI 2203-92: Recommendation. State system for ensuring uniformity of measurements. Test methods for measuring pressure. Datasheets
MI 2406-97: State system for ensuring uniformity of measurements. Liquid flow in open channels of water supply and sewage systems. Measurement Technique Using Standard Weirs and Trays
MI 2585-2000: State system for ensuring uniformity of measurements. Diaphragm measuring piping. Primary calibration technique
MI 263-82: Guidelines. Device measuring two-coordinate DIP-1. Methods and means of verification
MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices
MI 2701-2001: Recommendation. State system for ensuring uniformity of measurements. Barographs meteorological aneroid. Method of verification
MI 390-87: Guidelines. GSE. Levels are electronic. Method of verification
MI 524-2010: State system for ensuring uniformity of measurements. Shtangenzubomery with vernier SHZN-18, SHZN-40. Method of verification
MI 524-89: Recommendation. GSE. Stangenzubomery with nonius. Types of SHZN-18, SHZN-40. Method of verification
MI 928-85: GSE. Exemplary rings of the 3rd category. Methodology of metrological certification
MP 001-06-2012: Micrometers MK, ML, MT, MZ. Verification Method
MP 114-233-2018: GSI. Special flat angle measures
MP 203-5-2020: Werka depth gauges. Verification method
MP 203-9-2020: Squares testing 90 degrees of the Calibron trademark. Verification method
OST 108.030.133-84: Pipe elements of steam boiler heat surfaces under pressure less than 4 MPA, water boilers and heat-recovery boilers. Technical requirements, acceptance and control methods.
OST 13-86-80: Metrological support of furniture production. General requirements for calibration data base and instruments. Gauges monitoring.
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26.260.758-2003: Metal structures. General technical requirements.
PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels
PNST 453-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 2. Seamless steel pipes of austenitic steel grades 08Х18Н10Т and 08Х18Н10Т-Ш
PNST 454-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel
PNST 455-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of austenitic steel grade 08Х18Н10Т
PNST 456-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 5. Longitudinal welded cold-worked steel pipes of austenitic class steel
RD 08-195-98: Instructions for the technical diagnosis of the state of mobile units for well repair
RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.
RD 153-34.0-45.510-98: Model Guidelines for Operation and Repair of Slip Rings and Brushes of Turbine Generators with Power of 63 MW and Above
RD 16.407-2000: Explosionproof electrical apparatus. Repair
RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations
RD 34.21.543-88: Model Guidelines for Operation of Hydraulic Structures for Process Water Supply Systems of Thermal Power Stations
RD 34.30.605: Process instruction for replacement of steam turbine blades
RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment
RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions
RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.
RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks
RD 50-411-83: Methodological instructions. liquids and gases flow rate. Measurement technique using special orifices.
RD BGEI 05-89: Metrological support. Collection of sets of calibration tools for geodetic measuring instruments
RST RSFSR 678-82: Cast-iron stoves. General technical conditions
ST TsKBA 082-2009: Pipe fittings. Input control
TU 102-339-83: Asbestos-cement three-layer partition walls on a wooden frame with mineral wool plates
TU 102-356-83: Three-layer roofing panels from steel corrugated profile and mineral wool insulation
TU 102-357-83: Three-layer steel wall panels with mineral wool insulation for block boxes and blocks
TU 102-358-83: Three-layer steel coating panels with mineral wool insulation for block boxes
TU 102-367-84: Three-layer steel partition walls with mineral wool
TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type
TU 102-529-89: Mobile buildings (inventory) of the block-containers of the panel construction of the Neftegazstroy system
TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions
TU 14-3-1401-86: Seamless cold-deformed pipes of steel grade 02Х18Н11
TU 14-3-1428-86: Electric-Welded Straight-Seam Steel Pipes 1020 mm in Diameter for Gas and Oil Pipelines. Technical Specifications
TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision
TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines
TU 14-3-1972-97: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions
TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines
TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions
TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions
TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions
TU 14-3R-1471-2002: Northern-straight-seam electric-welded pipes for arranging oil and gas fields, main gas pipelines, oil and oil product pipelines of field pipelines. Technical specifications
TU 14-3R-197-2001: Seamless pipes made of corrosion-resistant steel with high surface quality. Technical conditions
TU 14-3R-251-2007: Seamless steel pipes for chemical and petrochemical plants with conditional pressure Py = 19.6 - 98 MPa (200 - 1000 kgf/cm2)
TU 14-3R-50-2001: Steel pipes, seamless, hot-rolled, thick-walled, of cast ingot
TU 14-3R-51-2001: Seamless steel pipes, hot-rolled, thick-walled for mechanical engineering
TU 14-3R-53-2001: Seamless mechanically machined steel pipes for steam pipelines
TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines
TU 14-3R-56-2001: Welded steel pipes with a diameter of 1420, 1620, 1720, 2020 and 2220 mm for general use. Technical conditions
TU 34-38-20219-94: Economizers smooth tube steam stationary boilers. Technical conditions for major repairs
TU 34-38-20220-94: Smooth tube steam stationary boilers with natural circulation screens. Technical conditions for major repairs
TU 34-38-20222-94: Steam superheaters of stationary steam boilers. Technical conditions for major repairs
TU 36.1395905-016-96: Three-layer frame panels with steel facings and mineral wool insulation
TU 36-26-11-4-89: Steel building construction, vertical cylindrical tanks for oil and petroleum products with a volume of 100 to 50,000 m3. Technical conditions
TU 36-2745-85: Scrap steel Technical conditions
TU 5262-001-23083253-96: Expanded steel sheets. Technical conditions
TU 5284-001-56506912-03: The panel is sound-absorbing and soundproof, noise-proof. Technical conditions
TU 5361-002-39430024-07: Hardwood boards
TU 67-18-163-93: Three-layer wall frameless panels with steel cladding and mineral wool insulation. Technical conditions
TU 67-18-172-94: Roofing and wall three-layer frame panels with steel linings and mineral wool insulation. Technical conditions
TU 67-564-83: Swing gate type of GRP. Technical conditions
TU 95.349-2000: Longitudinal electric-welded pipes from steel grades 08X18H10T, 12X18H10T for atomic electric and thermal stations. Technical specifications
VSN 411-88: Installation of Lubricating, Hydraulic, and Pneumatic Systems for General Industrial Applications
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.