GOST 8724-2002
ГОСТ 8724-2002
|
|
Basic norms of interchangeability. Metric screw threads. General plan
Основные нормы взаимозаменяемости. Резьба метрическая. Диаметры и шаги
Status: Valid - Supersedes
The standard applies to general purpose metric threads with a profile according to GOST 9150 and sets their diameters from 0.25 to 600 mm and steps from 0.075 to 8 mm.
Стандарт распространяется на метрические резьбы общего назначения с профилем по ГОСТ 9150 и устанавливает их диаметры от 0,25 до 600 мм и шаги от 0,075 до 8 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
6/23/2003
SKU: RUSS59259
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.1 General design issues piping valves (TPA) »
8.1.2 Interchangeability and other design requirements »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.040 Screw threads »
21.040.10 Metric threads »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.040 Screw Threads »
21.040.10 Metric threads »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G13 Threads »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Detachable connections (threads, keys, splines, etc.) »
As a Replacement Of:
GOST 8724-81: Basic norms of interchangeability. Metric screw thread. Diameters and pitches
The Document References:
GOST 11708-82: Basic norms of interchangeability. Screw thread. Terms and definitions
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 16093-70: Metric thread for diameters from 1 up to 600 mm. Tolerances
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 8724-81: Basic norms of interchangeability. Metric screw thread. Diameters and pitches
GOST 9000-81: Basic norms of interchangeability. Metric screw thread for diameters less than 1 mm. Tolerances
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
The Document is Referenced By:
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 21561-2017: Automobile tanks for hydrocarbon gas transportation at pressure up to 1,8 MPa. Technical requirements and test methods
GOST 24379.1-2012: Foundation bolts. Structure and dimensions
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24997-2004: Gauges for metric thread. Tolerances
GOST 27148-86: Fasteners. Screw thread run-out. Washout threads, total thread run-outs and intercuts. Dimensions
GOST 2746-90: Screw holders for electric lamps. General specifications
GOST 30892-2002: Basic norms of interchangeability. Metrical MJ theads. Profile, general plan, tolerances
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 31.0171.01-91: Devices for metal cutting machine tools. Parts and assembly units of general application. General technical requirements
GOST 31223-2012: Cable reels for household and similar purposes. General requirements and test methods
GOST 31602.1-2012: Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. Part 1. General requirements and particular requirements for clamping units for conductors from 0,2 up to 35 sq. mm (included)
GOST 31602.2-2012: Connecting devices. Safety requirements for screw-type and screwless-type clamping units for electrical copper coductors. Part 2. Particular reqirements for conductors from 35 up to 300 kv. mm
GOST 31603-2012: Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs). General requirements and test methods
GOST 31604-2012: Connecting devices. Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units. General requirements and methods of tests
GOST 31610.0-2012: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST 31610.0-2014: Explosive atmospheres. Part 0. Equipment. General requirements
GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST 31843-2013: Pйtroleum and natural gas industries. Reciprocating compressors. General technical requirements
GOST 32484.3-2013: High-strength structural bolting assemblies for preloading. System HR - Hexagon bolt and nut assemblies
GOST 32484.4-2013: High-strength structural bolting assemblies for preloading. System HV - Hexagon bolt and nut assemblies
GOST 32600-2013: Pumps. Shaft sealing systems for centrifugal and rotary pumps. General technical requirements and control methods
GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements
GOST 32601-2022: Centrifugal pumps for oil, petrochemical and gas industry. General technical requirements
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST EN 28839-2015: Mechanical properties of fasteners – bolts, screws, studs and nuts made of non-ferrous metals
GOST IEC 60950-1-2014: Information technology equipment. Safety. Part 1. General requirements
GOST IEC 62109-1-2019: Safety of power converters for use in photovoltaic systems. Part 1. General requirements
GOST ISO 10511-2016: Prevailing torque type hexagon thin nuts (with non-metallic insert)
GOST ISO 10512-2016: Prevailing torque type hexagon nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10
GOST ISO 10513-2016: Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8, 10 and 12
GOST ISO 12126-2016: Prevailing torque type all-metall hexagon nuts with flange with metric fine pitch thread, style 2. Product grades A and B
GOST ISO 14579-2015: Bolts with cylindrical head and star-type internal socket button
GOST ISO 14583-2015: Screws with rounded head and star-shaped recession for wrench
GOST ISO 15071-2014: Hexagonal bolts with reduced head with flange. Precision class A
GOST ISO 3506-1-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 1. Bolts, screws and studs
GOST ISO 3506-2-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 2. Nuts
GOST ISO 3506-3-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 3. Setting screws and similar fasteners not under tensile stress
GOST ISO 4162-2014: Hexagonal bolts with reduced head with flange. Precision class A to class of precision B
GOST ISO 7040-2014: Nuts Hex normal self-stopped (with non-metallic insert), type 1. Strength class 5, 8 and 10
GOST ISO 7041-2014: Nuts Hex high self-stopped (with non-metallic insert), type 2. Strength class 9 and 12
GOST ISO 7042-2016: Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12
GOST ISO 7043-2014: Nuts Hex high self-stopped with flange (with non-metallic insert), type 2. Precision classes A and B
GOST ISO 7044-2016: Prevailing torque type all-metall hexagon nuts with flange, style 2. Product grades A and B
GOST ISO 7380-1-2014: Round head screw. Part 1. Round head screw with hexagon socket
GOST ISO 7380-2-2014: Round head screw. Part 2. Round head screw with hexagon socket and rim
GOST ISO 7719-2014: Hex nuts, normal, self-stopping, all metal (Type 1). Strength class 5, 8 and 10
GOST ISO 7720-2014: Hex nuts, high, self-stopping, all metal (Type 2). Strength class 9
GOST ISO 898-1-2014: Mechanical properties of fasteners made of carbon and alloyed steels. Part 1. Bolts, screws and studs with specified property classes with large and small thread pitch
GOST R 50790-95: Hexagon head bolts with metric fine pitch thread, product grades A and B. Specifications
GOST R 50795-95: Hexagon head bolts with metric fine pitch thread and thread to head, product grades A and B. Specifications
GOST R 51322.1-2011: Plugs and socket-outlets for household and similar purposes. Part 1. General requirements and methods of tests
GOST R 51324.1-2005: Switches for household and similar fixed electrical installations. General requirements and tests methods
GOST R 51325.1-99: Appliance couplers for household and similar general purposes. Requirements and methods of tests
GOST R 51328-99: Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs). General requirements and test methods
GOST R 51330.0-99: Explosionproof electrical apparatus. Part 0. General requirements
GOST R 51539-99: Cable reels for household and similar purposes. General requirements and test methods
GOST R 51686.1-2000: Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. Part 1. General requirements and particular requirements for clamping units for conductors from 0,2 up to 35 sq. mm (included)
GOST R 51686.2-2000: Connecting devices. Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors. Part 2. Particular requirements for conductors from 35 up to 300 sq mm
GOST R 51701-2000: Connecting devices. Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units. General requirements and methods of tests
GOST R 52350.0-2005: Electrical apparatus for explosive gas atmospheres. Part 0. General requirements
GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods
GOST R 52628-2006: Nuts. Mechanical properties and test methods
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52854-2007: Bolts with star-type head and small flange. Specifications
GOST R 52855-2007: Bolts with star-type head and large flange. Specifications
GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements
GOST R 53737-2009: Petroleum and natural gas industries. Reciprocating compressors. General technical requirements
GOST R 54482-2011: Piping connections for general-use hydraulic fluid power. Hose fittings with metric stud ends and O-ring. Technical requirements
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 55430-2013: Detachable pipe joints. Evaluation of technical condition and methods of testing. Operation safety
GOST R 55740-2013: Steel bolts, screws and studs with adhesive coating. Technical requirements
GOST R 55741-2013: Steel bolts, screws and studs with locking coating. Technical requirements
GOST R 55742-2013: Screws with cylindrical head and large star-type internal socket
GOST R 56981-2016: Photovoltaic modules. Junction boxes. Safety requirements and tests
GOST R 57992-2017: Trunk pipeline transport of oil and oil products. Cast iron ballast units. General specifications
GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications
GOST R 58032-2017: Design and manufacture of site built, vertical, cylindrical, flatbottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and to-165 °C. Part 2. Metallic constructions
GOST R 60.3.4.1-2017: Robots and robotic devices. Manipulating industrial robots. Mechanical interfaces. Plates
GOST R IEC 60065-2005: Audio, video and similar electronic apparatus. Safety requirements
GOST R IEC 60079-0-2007: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R IEC 60079-0-2011: Explosive atmospheres. Part 0. Equipment. General requirements
GOST R IEC 60950-1-2005: Information technology equipment. Safety. Part 1. General requirements
GOST R IEC 60950-1-2009: Information technology equipment. Safety. Part 1. General requirements
GOST R IEC 60950-2002: Safety of information technology equipment
GOST R IEC 61730-1-2013: Photovoltaic module safety qualification. Part 1. Requirements for construction
GOST R ISO 10513-2009: Prevailing torque type all-metal hexagon nuts, style 2, with fine pitch thread. Property classes 8, 10 and 12
GOST R ISO 10642-2012: Hexagon socket countersunk head screws
GOST R ISO 1207-2013: Slotted cheese head screws. Product grade A
GOST R ISO 12126-2009: Prevailing torque type all-metal hexagon nuts with flange. Accuracy classes A and B
GOST R ISO 12474-2012: Hexagon socket head cap screws with metric fine pitch thread
GOST R ISO 14580-2012: Hexalobular socket cheese head screws
GOST R ISO 14584-2012: Star type socket raised countersunk head screws
GOST R ISO 15072-2013: Hexagon flange reduced head bolts with fine pitch thread. Product grade A
GOST R ISO 1580-2013: Slotted pan head screws. Product grade A
GOST R ISO 1751-2017: Ships and marine technology. Ships’ side scuttles
GOST R ISO 2009-2013: Slotted raised countersunk head screws. Product grade A
GOST R ISO 2010-2013: Slotted raised countersunk head screws. Product grade A
GOST R ISO 2320-2009: Prevailing torque type steel nuts - Mechanical and performance properties
GOST R ISO 3506-1-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 1. Bolts, screws and studs
GOST R ISO 3506-2-2009: Mechanical properties of corrosion-resistant stainless steel fasteners Part 2. Nuts
GOST R ISO 3506-3-2009: Mechanical properties of corrosion-resistant stainless steel fasteners. Part 3. Set screws and similar fasteners not under tensile stress
GOST R ISO 3903-2017: Ships and marine technology. Ships’ ordinary rectangular windows
GOST R ISO 4026-2013: Hexagon socket set screws with flat point
GOST R ISO 4027-2013: Hexagon socket set screws with cone point
GOST R ISO 4028-2013: Hexagon socket set screws with dog point
GOST R ISO 4029-2013: Hexagon socket set screws with cup point
GOST R ISO 4762-2012: Hexagon socket head screws
GOST R ISO 4766-2013: Slotted set screws with flat point
GOST R ISO 7042-2011: Prevailing torque type all-metal hexagon nuts, style 2. Property classes 5, 8, 10 and 12
GOST R ISO 7044-2009: Prevailing torque type all-metal hexagon nuts with flange. Accuracy classes A and B
GOST R ISO 7045-2013: Pan head screws with type H or type Z cross recess. Product grade A
GOST R ISO 7046-1-2013: Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A. Part 1. Steel screws of property class 4.8
GOST R ISO 7046-2-2013: Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A. Part 2. Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
GOST R ISO 7047-2013: Raised countersunk head screws with type H or type Z cross recess. Product grade A
GOST R ISO 7048-2013: Cross-recessed cheese head screws
GOST R ISO 7183-2017: Compressed-air dryers. Specifications and test methods
GOST R ISO 8839-2009: Mechanical properties of fasteners - bolts, screws, studs and nuts made of non-ferrous metals
GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread
OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
R 50-54-90-88: Recommendations. Calculations and tests of strength. General requirements for strength calculations for threaded connections
RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm
SP 16.13330.2011: Steel structures
SP 234.1326000.2015: Railway automation and remote control. Rules for construction and installation
SP 53-102-2004: General rules for steel structure design
ST TsKBA 104-2011: Pipe fittings. Adhesives and sealants. Stamps Basic parameters and conditions of use
VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
