imgalt

GOST 9416-83

ГОСТ 9416-83

Building levels. Technical requirements

Уровни строительные. Технические условия

Status: Effective - Supersedes. IUS 2-1984

The standard applies to construction levels (hereinafter referred to as levels) designed to check the horizontal and vertical position of the surfaces of building construction elements, as well as levels intended to transfer the tilt angle of a construction part to similar parts during construction and installation works without standardizing metrological characteristics. The technical level indicators established by the standard meet the requirements of the highest and first quality categories.

Стандарт распространяется на строительные уровни (далее - уровни), предназначенные для проверки горизонтальности и вертикальности расположения поверхностей элементов строительных конструкций, а также на уровни, предназначаемые для переноса угла наклона детали конструкции на аналогичные детали при производстве строительно-монтажных работ без нормирования метрологических характеристик. Показатели технического уровня, установленные стандартом, соответствуют требованиям высшей и первой категории качества.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of the Council of Ministers of the USSR for Construction, 10/31/1983

SKU: RUSS59272

Price: $217.00

English keywords: handicraft equipment;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 7. Normative documents for mobile buildings and structures, equipment, inventory and tools » K.71 Equipment of construction organizations »

ISO classifier » 53 LIFTING AND TRANSPORT EQUIPMENT » 53.120 Handicraft equipment »

National standards » 53 LIFTING AND TRANSPORT EQUIPMENT » 53.120 Handicraft equipment »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh3 Building structures and parts » Zh36 Construction Tools »

National Standards for OKSTU » CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS » Construction and finishing machines, construction and assembly tools, manual and mechanized »


As a Replacement Of:

GOST 9416-76: Building levels. Technical requirements

The Document References:

GOST 10667-90: Sheet organic glass. Specifications

GOST 10905-86: Surface plates and face-plates. Specifications

GOST 12034-77: Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications

GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage

GOST 14192-77: Marking of cargoes

GOST 14192-96: Cargo marking

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 1583-89: Aluminium casting alloys. Specifications

GOST 1583-93: Aluminium casting alloys. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 1761-92: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications

GOST 17622-72: Industrial organic plastic. Specifications

GOST 19300-86: Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.601-68: Unified system for design documentation. Exploitative documents

GOST 2.601-95: Operational documents

GOST 21228-85: Celluloid. Specifications

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 2386-73: Level vials. Specifications

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits

GOST 25349-88: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones for the plastics parts

GOST 2697-83: Roofing asphalt felt. Specifications

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4748-92: Silicon-manganese bronze strips and ribbons. Specifications

GOST 4784-74: Wrought aluminium and aluminium alloys. Grades

GOST 4784-97: Aluminium and wrought aluminium alloys. Grades

GOST 8026-92: Levelling rules. Specifications

GOST 8705-78: Nitrocellulose covered binding material. Specifications

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols

GOST 9569-2006: Paraffined paper. Specifications

GOST 9569-79: Paraffin paper

GOST 9754-76: Enamels MЛ-12 type. Specifications

The Document is Referenced By:

GOST 111-2001: Flat glass. Specifications

GOST 11214-2003: Windows of wood with glass. Specifications

GOST 18425-2018: Complete, filled transport packages. Vertical impact test by dropping

GOST 18425-73: Complete, filled transport packages. Vertical impact test by dropping

GOST 21519-2003: Windows of aluminium. Specifications

GOST 22845-2018: Lifts. Electric lifts. Installation, starting-up and adjustment works. The rules of the organization and manufacture of works, performance control and requiremens to results of works

GOST 22845-85: Electrical passenger and freight elevators

GOST 23747-2015: Door blocks of aluminium profiles. Specifications

GOST 24699-2002: Windows of wood with glass and glassing units. Specifications

GOST 24700-99: Windows of wood with glassing units. Specifications

GOST 24866-99: Sealed insulating glass units. Specifications

GOST 25097-2002: Windows from wood and aluminium. Specifications

GOST 25945-98: Building polymer sealing non-hardening materials and products. Test methods

GOST 26589-85: Roofing and hydroinsulatings mastics. Method for determination of the bond strength with the base

GOST 27180-2019: Ceramic tiles. Test methods

GOST 30673-2013: Polyvinylchloride profiles for windows and doors. Specifications

GOST 30673-99: Polyvinylchloride profiles for windows and doors. Specifications

GOST 30674-99: Windows of polyvinylchloride profiles. Specifications

GOST 30698-2000: Glass tempered for building. Specifications

GOST 30733-2000: Hard coat low emissivity glass. Specifications

GOST 30826-2001: Laminated glass for building. Specifications

GOST 30970-2002: Doors of polyvinylchloride profiles. Specifications

GOST 30970-2014: Door blocks of polyvinylchloride profiles. Specifications

GOST 30970-2023: Door blocks made of polyvinylchloride profiles. General technical conditions

GOST 30972-2002: Glue wood billets and details for windows and doors. Specifications

GOST 31173-2003: Steel doors. Specifications

GOST 31173-2016: Steel doors. Specifications

GOST 31364-2007: Soft coating low emissivity glass. Specifications

GOST 31462-2011: Safety windows. General specifications

GOST 32557-2013: Glass and glass products. Inspection methods for geometric parameters and appearance

GOST 32568-2013: Glass units for vehicles grazing. Specifications

GOST 33146-2014: Automobile roads of general use. Pipes for road culvert. Control methods

GOST 33950-2016: Pyrotechnic products. Test methods

GOST 34058-2017: Internal buildings and structures utilities. Mounting and start-up adaptive control of air-conditioning evaporative and condensing units. General technical requirements

GOST 34059-2017: Internal buildings and structures utilities. Arrangement of heating, heating and cooling water supply systems. General technical requirements

GOST 34377-2018: Lifts. Hydraulic lifts. Installation, starting-up and adjustment works. The rules of the organization and manufacture of works, performance control and requirement to results of works

GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions

GOST 34518-2019: Industrial furnaces and thermal units. Rules for the organization and production of work, monitoring of performance and requirements for the results of work

GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work

GOST 34914-2022: Windows for industrial buildings. General technical conditions

GOST 475-2016: Door Blocks wooden and combined. General specifications

GOST R 51271-99: Pyrotechnic goods. Methods of tests

GOST R 52172-2003: Glass units for vehicles glazing. Specifications

GOST R 53211-2008: Composite containers for dangerous cargoes. Test methods

GOST R 53322-2009: Pyrotechnic products for domestic use. Fire safety requirements. Test methods

GOST R 54162-2010: Tempered glass. Specifications

GOST R 54170-2010: Clear flat glass. Specifications

GOST R 54171-2010: Laminated glass. Specifications

GOST R 54175-2010: Sealed insulating glass units. Specifications

GOST R 54177-2010: Hart coat low emissivity glass. Specifications

GOST R 54179-2010: Hard coating solar protection or decorative glass. Specifications

GOST R 54180-2010: Heat strengthened glass. Specifications

GOST R 55908-2013: Floors. Method of the covering slipperiness evaluation

GOST R 56337-2015: Automobile roads of general use. Geosynthetics. Test procedure for determination of durability at the dynamic forcing through (cone drop test)

GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications

GOST R 58272-2018: Dry building masonry mixes. Technical conditions

GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions

GOST R 58700-2019: Wooden windows and balcony doors for low-rise residential buildings. Types, Design and Dimensions

GOST R 58739-2019: Roofing works. Installation of roofs with metal roofing. Rules and control of work

GOST R 8.899-2015: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Verification of measurement procedure

Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines (Sections 15-23. Appendices 1-11)

Guideline 424: Guidelines for the construction of line structures for backbone and intra-zone cable communication lines

KT 19.0-12.5-90: Map of the labor process of construction production. Flooring relin

KT 19.0-9.2-82: Map of the labor process of construction production. Parquet flooring

KT 3.0-3.44-75: Installation of door blocks in the openings of brick walls

KT 3.1-1.18-76: Installation of window reinforced concrete lintels

KT 4.1-15.9-75: Installation of sanitary cabins

KT 4.1-8.15-75: Installation of concrete pallets for bathrooms

KT 8.3-10.3-89: Map of the labor process of construction production. Facing the surface of ceilings with anodized aluminum stamped plates

Manual for SNiP 3.04.01-87: Recommendations on the arrangement of floors (in development of SNiP 3.04.01-87 "Insulating and finishing coatings")

Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems

MI 1740-87: State system for ensuring uniformity of measurements. Viscometer for determining the conditional viscosity of paints VZ-246. Method of verification

MI 2322-99: Recommendation. State system for ensuring uniformity of measurements. Typical norms of time for calibration of measuring instruments

NPB 255-99: Products pyrotechnics household. The requirements of fire safety. Methods of tests

OST 34-26.446-88: Bricking steam and hot water stationary boilers. General technical requirements

PNST 396-2020: Automobile roads for general use. Oil bitumen binders. Thin layer aging techniques

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RT 07-2011: Means for the adjustment of measuring instruments of hydrometeorological designation

SNiP 5.02.02-86: Standards of construction tools requirements

SO 003-02495342-2006: Floors. Methods for assessing the slipperiness of floor coverings

SO 153-34.10.109-88: Specified Quantity Allowances for Tools, Aids, and Equipment, Power Tools, Hand Tools, and Special Accessories for Repair and Operation of Thermal Power Stations, Hydroelectric Generating Stations, and Electrical and Piped Heat Supply Networks

STB 2106-2010: Pyrotechnic articles. Test methods

STB 2158-2011: Construction. Device bridges and pipes. The nomenclature of controlled quality indicators. Quality control of work

TR 114-01: Technical recommendations on the technology of flooring laminate flooring

TR 74-98: Guide to Good Practice for Installation of Laminated Parquet on Durable Plastic Base

TR 94.06-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 06: Finishing Work

TR 98-99: Guide to Good Practice for Installation of Wall and Floor Coverings Made of Large-Size Ceramic Tile

TU 5271-001-48810984-00: Window structures made of aluminum alloys for fencing balconies and loggias

TU 5369-004-54965805-05: Wooden glued blanks and details for interior decoration

TU 5369-005-54965805-05: Sets of parts and products wooden for collapsible saunas

TU 5913-001-58455567-2004: Low-Emission Glass with Soft Coating

VSN 18-95: Guidelines for Using Polymer, Bitumen Polymer, and Roll Waterproofing Materials for Installation of New Roofing and Repair of Existing Roofing of Residential, Public, and Factory and Industrial Occupancies

VSN 23-95: Instructions for the installation of floors of three-layer parquet boards of type PD-3 (PDP) in rooms of more than 40 m2

VSN 470-89: Specified Quantity Allowances for Hand Tools, Erection Appurtenances, and Mechanisms Used in Installation Practices and Military Construction

VSN 50-96: Guidelines for Finishing Walls Using Ceramic and Polymer Tile on Cements and Adhesives

VSN 57-88(r): Ordinance on Technical Inspection of Residential Buildings

VSN 65-97: Guidelines for Use of Water-Dispersed Cements and Adhesives in Finishing Work

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!