GOST R 50588-93
ГОСТ Р 50588-93
|
|
Foaming agents for fire extinguishing. General technical requirements and test methods
Пенообразователи для тушения пожаров. Общие технические требования и методы испытаний
Status: Not effective - Superseded. IUS 9-2012
This standard applies to foaming agents designed to produce air-mechanical foam to extinguish fires with the help of special equipment. The standard sets out mandatory requirements for frothers aimed at ensuring safety for life, public health and environmental protection.
Настоящий стандарт распространяется на пенообразователи, предназначенные для получения с помощью специальной аппаратуры воздушно-механической пены для тушения пожаров. В стандарте изложены обязательные требования к пенообразователям, направленные на обеспечение безопасности для жизни, здоровья населения и охраны окружающей среды
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
7/28/1993
SKU: RUSS59365
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G88 Fire fighting vehicles, equipment and inventory »
The Document is Replaced With:
GOST R 50588-2012: Foaming agents for fire extinguishing. General technical requirements and test methods
The Document References:
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 13045-81: Rota meters
GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 18995.1-73: Liquid chemical products. Methods for determination of density
GOST 18995.5-73: Organic chemical products. Methods for determination of freezing point
GOST 20845-2002: Frozen shrimps. Specifications
GOST 2084-77: Mobile gasoline Specifications
GOST 22567.5-93: Synthetic detergents and surfactants. Methods for determination of hydrogen ions concentration
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24104-88: General purpose and reference laboratory balances
GOST 2517-85: Crude oil and petroleum products. Methods of sampling
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 25828-83: Standard n-heptane. Specifications
GOST 28498-90: Liquid-in-glass thermometers
GOST 28743-93: Solid mineral fuel. Methods for determination of nitrogen
GOST 2874-82: Drinking water. Hygienic requirements and quality control
GOST 29329-92: Balance for static weightings
GOST 33-2000: Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of dynamic viscosity
GOST 33-82: Petroleum products. Method for determination of kinematic viscosity and calculation of dynamic viscosity
GOST 4.99-83: System of product quality indexes. Foaming agents for fire extinguishing. Nomenclature of indexes
GOST 4166-76: Reagents. Sodium sulphate. Specifications
GOST 4209-77: Reagents. Magnesium chloride 6-aqueous. Specifications
GOST 4233-77: Reagents. Sodium chloride. Specifications
GOST 5398-76: Textile reinforced pressure-suction rubber hoses without fittings. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6709-72: Distilled water. Specifications
GOST R 51105-97: Gasoline for combustion engines. Unleaded gasoline. Specifications
GOST R 51232-98: Drinking water. General requirements for organization and quality control methods
The Document is Referenced By:
GOST R 12.2.144-2005: Occupational safety standards system. Fire-fighting technics. Safety requirements. Test methods
GOST R 50588-2012: Foaming agents for fire extinguishing. General technical requirements and test methods
GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods
GOST R 51057-97: Fire engineering. Portable fire extinguishers. General technical requirements. Test methods
GOST R 52284-2004: Fire aerial ladders. General technical requirements. Test methods
GOST R 53251-2009: Fire-fighting equipment. Hand foam-nozzles. General technical requirements. Methods of testing
GOST R 53252-2009: Fire-fighting equipment. Foam mixers. General technical requirements. Methods of testing
GOST R 53264-2009: Fire equipment. Special clothing for fire-fighter. General technical requirements. Test methods
GOST R 53280.1-2010: Automatic fire extinguishing systems. Fire extinguishing media. Part 1. Foam fire extinguishing concentrates for surface application to water - miscible liquids. General technical requirements and test methods
GOST R 53280.2-2010: Automatic fire extinguishing systems. Fire extinguishing media. Part 2. Foams concentrate for subsurface extinguishing of fires oil and petroleum tanks. General technical requirements and test methods
GOST R 53287-2009: Water and foam fire fighting systems. Fire alarm hydraulic, fire foam inducer, feeder. General technical requirements. Test methods
GOST R 53290-2009: Fire engineering. Foam fire-extinguishing installations. Low expansion foam generators for subsurface extinguishing in tanks. General technical requirements. Test methods
GOST R 53326-2009: Fire equipment. Self-contained open-circuit compressed air breathing apparatus. General technical requirements. Test methods
GOST R 53329-2009: Fire elevators. General technical requirements. Test methods
GOST R 53330-2009: Fire foam elevators. General technical requirements. Test methods
GOST R 53331-2009: Fire-fighting equipment. Hand nozzles. General technical requirements. Methods of testing
GOST R 54344-2011: Fire equipment. Mobile manipulation vehicle systems for eliminating of emergencies and fire extinguishing. Classification. General technical requirements. Test methods
NPB 155-96: Fire engineering. Portable fire extinguishers. General reguirements and Test Methods
NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods
NPB 159-97*: Fire fighting equipment. Fire monitors combined. General technical requirements. Test methods
NPB 163-97*: Fire fighting equipment. The main fire trucks. General technical requirements. Test methods
NPB 166-97: Fire engineering. Fire extinguishers. Requirements of exploitation
NPB 167-97*: Fire rescue rope. General technical requirements. Test methods
NPB 172-98*: Fire rescue belts. General technical requirements. Test methods
NPB 176-98: Fire equipment. Fire fighting centrifugal pumps. General technical requirements. Test methods
NPB 200-2001: Fire-fighting equipment. Foammixers. General technical requirements. Test methods
NPB 304-2001: Foam fire extinguishing concentrates. General technical requirements and test methods
NPB 305-2001: Fire engineering. Charge of foam extinguishers and foam fire fighting sistems. General technical requirements and test methods
NPB 313-2002: Fire fighting equipment. Fire motor pumps. General technical requirements. Test methods
NPB 63-97: Automatic foam fire extinguishing installations feeders. general technical requirements. test methods
NPB 88-2001*: Fire extinguishing and alarm systems. Norms and design rules
Order 1573: The list of national standards and sets of rules, as a result of which, on a voluntary basis, compliance with the requirements of the Federal Law of July 22, 2008 No. 123-FZ "Technical Regulations on Fire Safety Requirements" is ensured
RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots
RD EO 1.1.2.09.0772-2008: Methods of assessing the technical condition and resource characteristics of systems and means of fire protection of nuclear power units
RMG 116-2011: State system for ensuring the uniformity of measurements. Tanks of main oil lines and oil storage depots. Maintenance operations and metrological assurance under operating conditions
Rules on the Selection of Pressure Vessels and Equipment: Instruction on the selection of pressure vessels and devices operating under pressure of 100 kgf/cm2 and overpressure protection, Ministry of Petroleum Energy
SDOS-07-2012: Methodological recommendations on the procedure for tightness control of technical devices and structures used and operated at hazardous production facilities
SP 135.13130.2012: Heliports. Fire safety requirements
SP 5.13130.2009: Fire protection systems. Automated fire alarm and fire extinguishing installations. Design norms and regulations
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.
Language: English |
Main-line diesel locomotives. General technical requirements.
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Automatic coupler model SA-3 and its components. Design and dimensions
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
Railway rolling stock. Norms for permissible exposure of railway track and test methods
Language: English |
Locomotives. Requirements for strength and dynamic qualities
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.