GOST R 51562-2000
ГОСТ Р 51562-2000
|
|
Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing
Оборудование газоочистное и пылеулавливающее. Фильтры рукавные. Пылеуловители мокрые. Требования безопасности. Методы испытаний
Status: Not effective - Canceled. Information about registration 984-st dated 11/21/2012; IUS 10-2013
The standard applies to bag filters (hereinafter referred to as filters) with filter cloths and non-woven materials intended for cleaning non-corrosive, non-explosive and non-sticky gas condensates from the solid particles, and wet mechanical dust collectors (hereinafter - dust collectors) intended for cleaning gas from harmful impurities carried out when it is in contact with the irrigating fluid. The standard does not apply to ultrasonic regeneration filters.
Стандарт распространяется на рукавные фильтры (далее - фильтры) с фильтрующими ткаными и неткаными материалами, предназначенные для очистки неагрессивных, невзрывоопасных и не склонных к слипанию и образованию конденсата газопылевых смесей от твердых частиц, и мокрые механические пылеуловители (далее - пылеуловители), предназначенные для очистки газа от вредных примесей, осуществляемой при его контакте с орошающей жидкостью. Стандарт не распространяется на фильтры с регенерацией ультразвуком.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
2/2/2000
SKU: RUSS59423
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Non-ferrous metals »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.3 Requirements for protection of atmospheric air in carrying out activities »
1.3.2 Requirements for protection of atmospheric air during design, placement, construction, reconstruction and operation of facilities »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.9 Equipment for centrifugal and gravity separation of liquid and non-uniform systems »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.7 Gas generators and cleaning devices »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.060 Water quality »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.060 Water quality »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.060 Water quality »
13.060.01 General water quality »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.060 Water quality »
13.060.01 General water quality »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G4 Machinery and equipment for heavy industry »
G47 Machines and equipment for chemical industry »
National Standards for OKSTU »
CHEMICAL AND PETROLEUM ENGINEERING »
Gas cleaning and dust collecting equipment »
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14776-79: Arc welding. Button welds. Main types, design elements and dimensions
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 14806-80: Arc welding of aluminium and aluminium alloys in inert gases. Welded joints. Main types, design elements and dimensions
GOST 15164-78: Electroslag welding. Welded joints. Main types, design elements and dimensions
GOST 15878-79: Resistance welding. Welded joints. Design elements and dimensions
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16038-80: Arc welding. Welded joints in pipelines of copper and copper-nickel alloy. Main types, design elements and dimensions
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17.2.4.01-80: Nature protection. Atmosphere. Method for determining the amount of drops carried after apparatus for wet scrubbing of dust and gases have been operated
GOST 17.2.4.06-90: Environment protection. Atmosphere. Methods for determination of velocity and flow rate of gas-and-dust streams from stationary sources of pollution
GOST 17.2.4.07-90: Environment protection. Atmosphere. Methods of determination of pressure and temperature of gas-and-dust streams from stationary sources of pollution
GOST 17.2.4.08-90: Environment protection. Atmosphere. Methods of determination of humidity of gas-and-dust streams from stationary sources of pollution
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 25747-83: Bag and pocket filters
GOST 27580-88: Arc welding of aluminium and aluminium alloys in inert gases. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST R 50820-95: Scrubber and duster equipment. Methods of determination of dust load of gas-and-dust streams
The Document is Referenced By:
GOST 31826-2012: Gas cleaning and dust catching equipment. Bag filters. Wet dust catching equipment. Safety requirement. Methods of testing
GOST R 53613-2009: Classification overall performance of influence of environmental conditions appearing in nature on the technical products. Precipitation and wind
MR 1.2.2641-10: Determination of priority types of nanomaterials in environmental objects, living organisms and food products
MU 2.3.2.2789-10: Guidelines for the sanitary-epidemiological assessment of the safety and functional potential of probiotic microorganisms used for food production
MUK 4.1.2073-06: Methodological guidelines for measuring the concentrations of dicamba in the atmospheric air of populated areas using gas-liquid chromatography
MUK 4.1.2105-06: Determination of the mass concentration of manganese, lead, magnesium in hair samples by atomic absorption spectrometry
MUK 4.1.2106-06: Determination of the mass concentration of manganese, lead, magnesium in blood samples by atomic absorption spectrometry
MUK 4.1.2107-06: Determination of the mass concentration of phenol in biological media (urine) by gas chromatography
MUK 4.1.2345-08: Measurement of esfenvalerate concentrations in ambient air of populated areas using capillary gas-liquid chromatography
MUK 4.1.2995-12: Measurement of penflufen concentrations in the air of the working area and washes from operators' skin by high performance liquid chromatography
MUK 4.1.2998-12: Measurement of carbendazim concentrations in ambient air of populated areas using high performance liquid chromatography
MUK 4.1.2999-12: Measurement of piclorama concentrations in the atmospheric air of populated areas using capillary gas-liquid chromatography
MUK 4.1.3000-12: Measurement of pyrimethanil concentrations in the air of the working area and washes from the skin of operators using high performance liquid chromatography
MUK 4.1.3004-12: Measurement of concentrations of florasulam in the atmospheric air of populated areas by high performance liquid chromatography
MUK 4.1.3246-14: Measurement of imazamox concentrations in the atmospheric air of populated areas using high performance liquid chromatography
MUK 4.1.3273-15: Measurement of chloromequate chloride concentrations in the air of the working area, ambient air of populated areas and washes from the skin of operators using high performance liquid chromatography
MUK 4.1.3276-15: Measurement of concentrations of bromoxynil octanoate and bromoxynil heptanoate in the air of the working area and washes from operators' skin by capillary gas-liquid chromatography
MUK 4.1.3285-15: Determination of residues of isopyrazam in bananas by capillary gas-liquid chromatography
|
Customers Who Viewed This Item Also Viewed:
 |
Construction in seismic regions
Language: English |
2015 Kazakhstan PUE RK Rules for Arrangement of Electrical Installations. ALL SECTIONS.
Language: English |
Tobacco and tobacco product. Determination of phosphor organic pesticides. Thin layer chromatographic method
Language: English |
Tobacco and tobacco product. Determination of chloro-organic pesticides. Thin layer chromatographic method
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.